Percussion Play Tubular Bells User manual

Surface Fixed
1. Assemble 5 sections of
wooden Base using screws
provided
2.Attach Surface fixing
brackets to the base using the
coach screws
Installation Instructions
Tubular Bells will arrive on
site in pre assembled
Ground Surface
Ground Fix
Components: 89 Kg
Spares available form
percussionplay.co.uk or from your
local distributor
Pair Large Red
Beaters X1
Instrument
Components:
Tubular Bells
are pre-
assembled
Weight of heaviest part 31kg (Wooden Base)
Tubular Bells
Page 1 of 2
BS EN 1176
3.Locate Base in desired
location and mark holes to fix
to desired surface.
4. Fix to Surface using
recommended ground
anchors not supplied
5. Make sure all fixings are
covered and secure using
cover caps provided
6. Insert Tubular Bells into
base an fix in place using
screws provided.
M8x50 Coach Screw
x6
L Brackets
x6
2 Part Cover Cap
x6
5x70 Screw
x9
6x120 Screw
x10

Surface Fixed
Assembly Guide PPRASA
47 Kg
Spares available form
percussionplay.co.uk or from your
local distributor
Played with hands
Instrument
Components:
Rainbow
Sambas
are pre-
assembled
Tubular Bells
Page 2 of 2
BS EN 1176
Ground Fix
Components:
M8x50 Coach Screw
x6
L Brackets
x6
2 Part Cover Cap
x6
6x120 screw X10
COMPONENTS LIST:
Surface Fix L Bracket X6
2 Part black cap X6
5x70 screw X9
8x50 Coach screw X6
5x70 Screw
x9
6x120 Screw
x10