Percussion Play Capella User manual

Ground Fixed
Capella
Page 1 of 3
400mm
Ground Surface
930mm
Installation Instructions
(1.1)
(1.3)
Instrument
Components:
6. Attach the 1 pair of beater
to the saddle strap on the leg.
(1.3)
Ground Fix
Components: 30 Kg
2. Attach Ground Fixing s to
base of legs(1.2) (See Ground
Fix Post Installation Sheet)
1. Attach the steel legs to the
resonators of the instrument
with the M8x60 security
screws and lock washers. (See
Assembly Guide)
5. Once happy with location of
the Instrument, fill holes using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines.
3.Excavate 2 holes for the
Steel legs 250mm diameter by
450mm deep in desired
location upon decision from
customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
Pair Small Red
Beaters X1
Weight of heaviest part 15kg (Resonators)
BS EN 1176
Metric Conversion:
250mm/ 10”
300mm/ 12”
450mm/ 18”
700mm/ 28”
850mm/ 33”
1.5m/ 59”
Spares available form
percussionplay.com or from your local
distributor
1.5m
M8x60 Security Screw
x8
M6x20 Security Screw
x2
M6 Saddle Strap
x2
M10x30 Security Screw
x4

M8x60 Pin torx X8
M10 Nut X8
M10x150 Threaded Bar X4
COMPONENTS LIST:
Saddle Strap X2
M6x25 Pin torx X4
M10x30 Pin torx X4
Ground Fixed
Instrument
Components:
Assembly Guide PPCAPELLA
(1.1)
M8x60 Security Screw
x8
M6x20 Security Screw
x2
M6 Saddle Strap
x2
M10x30 Security Screw
x4
Ground Fix
Components: 30 Kg
Pair Small Red
Beaters X1
Capella
Page 2 of 3
TX 30 Driver Bit
x1
TX 40 Driver Bit
Tools:
x1
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Spares available form
percussionplay.com or from your local
distributor
Thread Lock Solution
Required (Not Supplied)

Insert U Bracket into
bottom of square legs
Fix U bracket with
M10x30mm screws on
each side
Fill hole with fast drying
concrete to manufacturers
specifications.
450
50
350
250
Aggregate
Concrete
Excavate a hole with a
250mm diameter tapering
down to 350mm diameter
and 450mm depth
Compact base of hole with
50mm of aggregate.
Lower ground Fix post
attached of instrument
into hole (check
instrument straight and
level before filling with
concrete)
Ground Fixed
Components:
Ground Fix Post Installation
(1.1)
1 2 3
4
Duplicate points 1-5. Capella requires 2
Ground Fix Posts
400mm min depth
Capella
Page 3 of 3
BS EN 1176
5
Foundations should not present a hazard.
These foundations are recommended as a
guide, for more information on foundation
details for various surface see Part 7 of BS EN
1176.
Metric Conversion:
50mm/ 2”
250mm/ 10”
350mm/ 14”
400mm/ 16”
450mm/ 18”
TX 45 Driver Bit
Tools:
x1
M10x30 Security Screw
x4