Percussion Play OPC300 User manual

Ground Fixed
Components:
1. Carefully lay 3 x legs on a
level surface and check
distance between each leg is
equal. Join together the 2
parts of the symphony. Line up
pre drilled holes in the
backboards with the legs and
ensure the instrument is
aligned square with the legs.
Fix in place using M8x40mm
screws supplied (see
installation guide)
2.(See ground fix
sheet)Excavate 3 holes on site
of installation approximately
600mm deep ( adjust depth
according to age range for
intended players)
3. Carefully raise the
instrument from the ground
with legs attached and locate
(lower) legs into holes making
sure they are vertical and level
prior to concreting in place.
Installation Instructions
4. Once happy with location
and levels, fill holes using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines
5. Beaters can be fixed to
Stainless Steel posts with
fixings provided
KS2
KS2 –850mm
Ground Surface
Spares available form
percussionplay.co.uk or from your
local distributor
Pair Small
Beaters X3 25 Kg
BS EN 1176
1.5m
Weight of heaviest part 12kg (Freechimes Left Panel)
1.5m
600mm
Install Instrument
with 1.5m free space
(from widest point)
around it.
Freechimes
Symphony
Page 1 of 4
M6x20mm
Secure Screw
X6
Eye Straps
X3
M8x40mm
Secure Screw
X10
M8 Lock Washer
X10
M10x200 Threaded Bar
x6
M10 Nut
x12
Ground Fix
Components:

Ground Fixed
Assembly Guide PPFREC
25 Kg
Spares available form
percussionplay.co.uk or from your
local distributor
BS EN 1176
Pair Small
Beaters X3
Freechimes
Symphony
Page 2 of 4
COMPONENTS LIST:
Saddle Strap X3
M8 Lock washer X10
M8x40 Pin torx X10
M10 Nut X12
M10x200 Threaded Bar X6
M6x20 Pin torx X6
TX 40 Driver Bit
x1
TX 30 Driver Bit
x1
Tools:
Components:
M6x20mm
Secure Screw
X6
Eye Straps
X3
M8x40mm
Secure Screw
X10
M8 Lock Washer
X10

Ground Fix Installation
(1.1)
1
2
Ground Fixed
BS EN 1176
Freechimes
Symphony
Page 3 of 4
M10 BZP Nut
X8
M10x200mm
BZP Bar
X4
Components:
Carefully lay 3 x legs on a level surface. Line up pre drilled holes in the backboards with
the legs and ensure the instrument is aligned square with the legs. Fix in place using
M8x40mm screws supplied
Excavate 3 holes with a 250mm dia meter tapering down to 350mm diameter and 650mm depth
Compact base of hole with 50mm of aggregate. Lower ground Fix posts attached to instrument into
hole (check instrument straight and level, and at correct height before filling with concrete)
50 600
Fill holes with fast drying concrete to manufacturers specifications. If posts protrude above
instrument they can be cut down

Ground Fix Installation
(1.1)
3
Ground Fixed
BS EN 1176
Freechimes
Symphony
Page 4 of 4
4
Foundations should not present a hazard. These foundations are
recommended as a guide, for more information on foundation
details for various surface see Part 7 of BS EN 1176.
M10 BZP Nut
X8
M10x200mm
BZP Bar
X4
Components:
Carefully lay 3 x legs on a level surface. Line up pre drilled holes in the backboards with
the legs and ensure the instrument is aligned square with the legs. Fix in place using
M8x40mm screws supplied
Excavate 3 holes with a 250mm dia meter tapering down to 350mm diameter and 650mm depth
Compact base of hole with 50mm of aggregate. Lower ground Fix posts attached to instrument into
hole (check instrument straight and level, and at correct height before filling with concrete)
50 600
Fill holes with fast drying concrete to manufacturers specifications. If posts protrude above
instrument they can be cut down