Percussion Play Wall Marimba User manual

Instrument
Components: KS1,KS2
KS2 - 850mm
Ground Surface
KS1 - 700mm
Installation Instructions
14 Kg
4. Once all mounts are fixed
in place attach the notes
using M8 Barrel Nuts and Pin
torx bit.
1. Mark hole positions on wall,
then drill to manufacturers
specified diameter and depth
of M10 rawl bolt (See Wall Fix
installation sheet)
2. Once holes are drilled
insert M10 rawl bolts into
holes and set in place to
secure tightly
3. Attach wall mounts onto
rawl bolts making sure they
are tight to the wall and have
the large holes to the outside.
Use a long tool to tighten
further.
1m
Pair Small Red
Beaters X1
Weight of heaviest part 12kg (Wall Marimba Notes)
BS EN 1176
Wall Fixed
M8 Barrel Nut
x4
Wall mounts
x4
1m
1m
Install Instrument with 1m free space (from widest point) around it.
Wall Marimba
Page 1 of 3
Wall fixings are not supplied, installer will select suitable
method of fixing. Suggested Fixing M10 Rawl Bolt
Metric Conversion:
700mm/ 28”
850mm/ 33”
1m/ 39”
Spares available from
percussionplay.com or from your
local distributor

Wall Fixed
Instrument
Components:
Assembly Guide PPWMAR
M8 Barrel Nut
x4
14 Kg
Pair Small Red
Beaters X1
Wall Marimba
Page 2 of 3
TX 40 Driver Bit
x1
Tools:
BS EN 1176
COMPONENTS LIST:
M8 Barrel Nut Pin torx X4
Wall fixings are not supplied, installer will select suitable
method of fixing. Suggested Fixing M10 Rawl Bolt
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Spares available from
percussionplay.com or from your
local distributor

Wall Fix Installation
(1.1)
TX 45 Driver Bit
Tools:
x1
BS EN 1176
Wall Fixed
Instrument
Components:
M8 Barrel Nut
x4
Wall Marimba
Page 3 of 3
Wall mounts
x4
1. Mark hole positions . 2. Drill holes .
3. Fit wall mounts . 4. Attach notes .
Metric Conversion:
1507mm 59 21/64”
1492mm/ 58 47/64”
1490mm/ 58 21/32”
300mm/ 11 13/16”
150mm/ 5 29/32”
75mm/ 3”