Perenio PEKIT01 User manual

Installation and Operation Manual
for Perenio® PEKIT01
Smart Security Kit
July, 2020

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.4.1
Page 3of 69
Introduction
The Perenio Smart Security Kit is specially designed to detect potentially dangerous
situations in the area or your interest. It is used as a part of a reliable Perenio Smart
Building Management System.
The Control Gateway allows the User to monitor and manage operation of all connected
ZigBee devices without passing commands to third party servers. Sensors provide
timely push-notifications of any emerging problems, as well as prompt responses
thereto.
The present Manual contains a detailed description of devices, as well as instructions
for their installation and operation.
Copyrights
Copyright of ©Perenio IoT spol s r.o. All rights reserved.
The Perenio® trademark is owned by Perenio IoT spol s r.o. (hereinafter referred to
as the Perenio IoT). All other similar trademarks and names, as well as logos and other
symbols are the property of their respective owners*.
All materials under Perenio® tradename contained therein are protected in
accordance with international and local laws including Acts on copyrights and related
rights.
Any reproduction, copying, publication, as well as further distribution or public display
of materials contained in the present document (whether in full or in part) shall not be
allowed until an appropriate permission of the copyright owner is obtained. Any
unauthorized usage of materials contained herein may lead to civil liability and criminal
prosecution in accordance with applicable laws.
Any eventual mentioning of other company names and equipment in the present
document is made solely for the purpose of clarifying and describing the device
operation and shall not infringe on the third party’s intellectual property rights.
*ZIGBEE is the registered trademark of ZigBee Alliance; iOS is the registered trademark of CISCO TECHNOLOGY, INC.;
Android is the registered trademark of Google Inc.; Google Play is the trademark of Google Inc.; App Store is the
registered trademark of Apple Inc.; Linux is the registered trademark of Linus Torvalds.

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
Doc Version: 2.4.1 ©Perenio IoT spol s r.o. All Rights Reserved
Page 4of 69
Responsibility and Technical Support
The present document is prepared in accordance with all necessary requirements and
contains detailed information on the device installation, configuration and control valid
as of the date of its issue.
Perenio IoT reserves the right to modify the device and make corrections or changes
to this document without prior notice of the User, and shall not be responsible for any
potential negative consequences which may arise from the use of an outdated version
of the document, as well as for any possible technical and/or typographical errors,
either omitted or accidental, or any related damage that may result from the document
transfer or the use of devices.
Perenio IoT shall make no guarantee with respect to any data contained herein
including but not limited to the device merchantability and fitness for a particular
purpose.
For any technical issues, please contact your local Perenio IoT representative or the
Tech Support Department at perenio.com.
The most common problems may be found in Section 7 of the present document and
at perenio.com where you can also download the latest version of this Installation
and Operation Manual.
Manufacturer:
Perenio IoT spol s r.o.
Na Dlouhem 79, Ricany –Jazlovice 251 01, Czech Republic
perenio.com

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.4.1
Page 5of 69
Conformance to Standards
The device is CE certified and complies with requirements of the
following Directives of the European Union:
2014/53/EU Radio Equipment Directive (RED);
2014/35/EU Low Voltage Directive (For the Control Gateway
only);
2004/30/EC Electromagnetic Compatibility Directive.
The device has passed all procedures of assessments established
in Technical Regulations of the Customs Union and conforms with
standards of the Customs Union
The device complies with the requirements of Restriction of the Use
of Certain Hazardous Substances in Electronic and Electrical
Equipment (2011/65/EU Directive)
The device complies with requirements of the Technical Regulations
of the Republic of Belarus TR 2018/024/BY (Telecommunications.
Security)
The national conformity mark of the Ukraine indicating that the
device meets requirements of all applicable technical regulations
The device and supplied batteries must not be disposed of as a
household waste in accordance with the Waste Electrical and
Electronic Equipment Directive (2002/96/EC)
For the purpose of protection of the environment and human
health, both the device and batteries must be disposed of in
accordance with approved instructions on safe disposal. For more
information on proper disposal, please contact your device supplier
or local authorities responsible for waste management
Details on available Certificates are specified in
Section 6 of the present document. For copies
of Certificates and Reports, please visit a
corresponding Section at perenio.com.
AT
BA
BG
CZ
HR
LT
LV
PL
SK

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
Doc Version: 2.4.1 ©Perenio IoT spol s r.o. All Rights Reserved
Page 6of 69
Table of Contents
Introduction .................................................................................................. 3
Copyrights..................................................................................................... 3
Responsibility and Technical Support.................................................................4
Conformance to Standards...............................................................................5
Table of Contents ........................................................................................... 6
1 General Description and Specifications.......................................................... 10
1.1 PEACG01 Control Gateway..................................................................... 10
1.1.1 General Purpose ............................................................................. 10
1.1.2 Technical Specification..................................................................... 12
1.1.3 Scope of Delivery............................................................................ 14
1.2 PECSS01 Smoke Sensor........................................................................ 14
1.2.1 General Purpose ............................................................................. 14
1.2.2 Technical Specification..................................................................... 16
1.2.3 Scope of Delivery............................................................................ 17
1.3 PECLS01 Leak Sensor ........................................................................... 18
1.3.1 General Purpose ............................................................................. 18
1.3.2 Technical Specification..................................................................... 20
1.3.3 Scope of Delivery............................................................................ 21
1.4 PECWS01 Door & Window Sensor ........................................................... 22
1.4.1 General Purpose ............................................................................. 22
1.4.2 Technical Specification..................................................................... 23
1.4.3 Scope of Delivery............................................................................ 24
1.5 PECMS01 Motion Sensor........................................................................ 25
1.5.1 General Purpose ............................................................................. 25
1.5.2 Technical Specification..................................................................... 28
1.5.3 Scope of Delivery............................................................................ 30
1.6 Packaging and Labelling ........................................................................ 30
1.7 Safe Operation Rules ............................................................................ 31
1.8 Why ZigBee......................................................................................... 31

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.4.1
Page 7of 69
1.9 Standalone Operation of Perenio® Sensors...............................................33
2 Installation and Setup.................................................................................34
2.1 Initial Installation and Configuration of the Control Gateway .......................36
2.2 Reset to Factory Settings .......................................................................42
2.3 Ethernet Connection..............................................................................42
2.4 Wi-Fi Router Frequency Settings .............................................................42
2.5 Changing the Room or Location for the Control Gateway.............................43
2.6 First Installation and Configuration of the Smoke Sensor ............................44
2.7 First Installation and Configuration of the Leak Sensor ...............................46
2.7.1 Leak Sensor Tightness......................................................................47
2.8 First Installation and Configuration of the PECWS01 Sensor ........................48
2.9 First Installation and Configuration of the Motion Sensor ............................50
2.10 Changing the Room or Location for Sensors ............................................54
2.11 History and Push-Notifications...............................................................55
2.12 Upgrading the Control Gateway Firmware ...............................................56
2.13 Battery Replacement ...........................................................................57
3 Maintenance and Repair ..............................................................................58
4 Warranty Obligations ..................................................................................59
5 Storage, Transportation and Disposal of Devices.............................................62
6 Other Information ......................................................................................63
7 Troubleshooting .........................................................................................65
8 Glossary....................................................................................................68
Figures and Tables
Figure 1 - The PEACG01Control Gateway Exterior ..............................................11
Figure 2 - The PEACG01 Control Gateway Buttons, Ports and Indicators................11
Figure 3 - Scope of Supply of the PEACG01 Control Gateway...............................14
Figure 4 –PECSS01 Smoke Sensor Exterior ......................................................15
Figure 5 –PECSS01 Smoke Sensor Buttons and Indicators .................................15
Figure 6 –Scope of Supply of the PECSS01 Smoke Sensor..................................18

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
Doc Version: 2.4.1 ©Perenio IoT spol s r.o. All Rights Reserved
Page 8of 69
Figure 7 –PECLS01 Leak Sensor Exterior......................................................... 19
Figure 8 –PECLS01 Leak Sensor Buttons and Indicators .................................... 19
Figure 9 –Scope of Supply of the PECLS01 Leak Sensor .................................... 21
Figure 10 –PECWS01 Door & Window Sensor Exterior....................................... 22
Figure 11 –PECWS01 Door & Window Sensor Components ................................ 23
Figure 12 –Scope of Supply of the PECWS01 Door & Window Sensor .................. 25
Figure 13 –PECMS01 Motion Sensor Exterior ................................................... 26
Figure 14 –PECMS01 Motion Sensor Components ............................................. 26
Figure 15 –Detection Angles of the PECMS01 Motion Sensor .............................. 29
Figure 16 –Scope of Supply of the PECMS01 Motion Sensor ............................... 30
Figure 17 –Self-Recovery of the ZigBee Network.............................................. 32
Figure 18 –Examples of installation of the CG and the Door & Window Sensor...... 34
Figure 19 –Examples of installation of the Leak and Motion Sensors .................... 35
Figure 20 –Add new device procedure (The CG activation process) ..................... 41
Figure 21 —Installation of the Smoke Sensor on a flat and sloping ceiling............ 45
Figure 22 –Fastening of the Smoke Sensor on screws or the 3M tape.................. 45
Figure 23 –Disassembling the mounting bracket from the Smoke Sensor............. 46
Figure 24 –Ensuring tightness of the Leak Sensor casing................................... 48
Figure 25 –Installation rules for the Sensor and the Magnet .............................. 49
Figure 26 –Motion Sensor orientation during installation ................................... 51
Figure 27 –Add new device (Sensor) procedure ............................................... 53
Figure 28 –Positioning of the battery in Sensors............................................... 57
Table 1 –Control Gateway LED Indicator Statuses ............................................ 12
Table 2 –Basic Technical Specifications of the Control Gateway .......................... 12
Table 3 –Basic Technical Specifications of the Smoke Sensor ............................. 16
Table 4 –Basic Technical Specifications of the Leak Sensor ................................ 20
Table 5 –Basic Technical Specifications of the Door & Window Sensor ................. 23
Table 6 –Basic Technical Specifications of the Motion Sensor ............................. 28
Table 7 –Data on separately supplied CG and Sensors ...................................... 31
Table 8 –Typical Errors and Troubleshooting Methods ....................................... 65

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.4.1
Page 9of 69
Connection to the Perenio Smart Mobile App
A. INSTALLATION OF THE PERENIO SMART MOBILE APP.....................................36
B. DEVICE ACTIVATION BY QR CODE SCANNING...............................................38
C. SENDING WI-FI NETWORK DATA TO THE DEVICE ..........................................39
D. LOCATION AND ROOM SETTING..................................................................40
E. SWITCHING ON AND INSTALLATION OF THE SMOKE SENSOR .........................44
F. SWITCHING ON AND INSTALLATION OF THE LEAK SENSOR ............................47
G. SWITCHING ON AND INSTALLATION OF THE DOOR & WINDOW SENSOR..........48
H. SWITCHING ON AND INSTALLATION OF THE MOTION SENSOR: ......................50
I. CONNECTION TO THE CONTROL GATEWAY....................................................52

Installation and Operation Manual for Perenio®
PEKIT01 Smart Security Kit
Doc Version: 2.4.1 ©Perenio IoT spol s r.o. All Rights Reserved
Page 10 of 69
1 General Description and Specifications
The Smart Security Kit consists of the following devices:
1. PEACG01 Control Gateway.
2. PECSS01 Smoke Sensor.
3. PECLS01 Leak Sensor.
4. PECWS01 Door & Window Sensor.
5. PECMS01 Motion Sensor.
The following paragraphs contain the detailed information on general purpose,
technical specification and the scope of delivery of the Kit.
ATTENTION! All Products and the Mobile Application of the Company (including
any future software and hardware whether in-house or third-party developed) are
not intended for emergency responses and cannot be used as fire-extinguishing
equipment and/or for emergency intervention, including but not limited to fires,
flooding, gas leaks or explosions, burglary and theft, as well as natural disasters
and other force majeure circumstances leading to damage and/or losses incurred
by the Client or caused to their estates, personal property and/or other products,
devices, personal data and privacy.
1.1 PEACG01 Control Gateway
1.1.1 General Purpose
The Perenio® PEACG01 Control Gateway (hereinafter referred to as the CG) is
designed to join operation of ZigBee devices within the Perenio Smart Building
Management System, as well as to collect data and alert Users in the event of alarm.
The Control Gateway searches for and manages devices via the Mobile App.
Key features of the PEACG01 Control Gateway are as follows:
Support for Wi-Fi and ZigBee;
iOS (10.1 and higher) and Android (5.1 and higher) smartphone compatibility;
Possibility to connect up to 100 ZigBee devices located within the radius of 40 m;
Support for cloud services, collection and analysis of data;
Remote control via a free Mobile App.