Pet Gear ON-THE-GO Pet EASY STEP BED STAIR User manual

To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
EASY STEP BED STAIR
PG9760

EASY STEP BED STAIR • PG9760
2
INSTRUCTIONS
You will be assembling two separate sets of stairs for our Easy Step Bed Stairs.
The 3-step and the 2-step.
3-Step
2-Step

3
EASY STEP BED STAIR • PG9760
PARTS LIST FOR 2-STEP
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Dowel
Risers
Top Stair Bottom Stair
AB
C
EF
D
with Straight Edge with Curved Side
LEFT PANEL RIGHT PANEL

4EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 2-STEP
Step 1
Place right panel, part (B) on oor with PET GEAR Logo
facing the oor and insert top stair, part (E).
Keep the STRAIGHT EDGE toward the back and rug
facing the top. Make sure there are no gaps between
parts after inserting.
(If inserting part is difcult put a little dish soap on
doweled end before inserting.)
Step 2
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
Step 3
Insert bottom stair, part (F). Note the CURVED SIDE
direction. Make sure there are no gaps between parts
after inserting.
Step 4
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
E
B
C
F
C
Straight Edge
Curved
Side

5
EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 2-STEP
Step 5
Insert dowel, part (D). Make sure there are no gaps between
parts after inserting.
D
Step 6
Attach left panel, part (A). Align all holes before pushing
panel down. Make sure there are no gaps between parts
after inserting.

A
B
B
EASY STEP BED STAIR • PG9760
6
PARTS LIST FOR 3-STEP
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Dowels
Second Stair
with Curved Side
Carpet
Hidden Storage
Panel
FRONT VIEW
OF PARTS
Risers
D
N
Q
O
M
P
R
C
IJ
KL
Front Flat Panel
A
with Straight Edge
Top Stair
H G
Back Support Bar
Bottom Stair
LEFT PANEL RIGHT PANEL

EASY STEP BED STAIR • PG9760 7
PARTS LIST FOR 3-STEP
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
BACK VIEW
OF PARTS
P
NM
O
B
A
B
Risers
A
A
B
B
O
P
IJ
A
JI
KL
DC
GH
Second Stair
with Curved Side
C
D
with Straight Edge
Top Stair
H
G
K
L
Front Flat Panel
Hidden Storage
Panel
MN
Back Support Bar
Bottom Stair
LEFT PANEL RIGHT PANEL

8
ASSEMBLY INSTRUCTIONS FOR 3-STEP
LEFT PANEL
G
Step 1
Place LEFT PANEL on oor with PET GEAR Logo
facing the oor and insert top stair, PART G/H.
Keep the STRAIGHT EDGE toward the back and rug
facing the top. Make sure there are no gaps between
parts after inserting.
(If inserting part is difcult put a little dish soap on
doweled end before inserting.)
Step 2
Insert RISER, PART B. Make sure there are no gaps
between parts after inserting.
Step 3
Insert SECOND STAIR, PART D/C.
Note the CURVED SIDE direction.
Make sure there are no gaps
between parts after inserting.
B
LEFT PANEL
LEFT PANEL
D
EASY STEP BED STAIR • PG9760
Straight Edge
Curved
Side

9
Step 6
Insert FRONT FLAT PANEL, PART K/L.
Make sure there are no gaps between
parts after inserting.
ASSEMBLY INSTRUCTIONS FOR 3-STEP
B
LEFT PANEL
Step 4
Insert RISER, PART B. Make sure there are
no gaps between parts after inserting.
Step 5
Insert BOTTOM STAIR, PART J/I.
Note the CURVED SIDE direction.
Make sure there are no gaps
between parts after inserting.
LEFT PANEL
LEFT PANEL
J
K
EASY STEP BED STAIR • PG9760
Curved
Side

10 EASY STEP BED STAIR • PG9760
ASSEMBLY INSTRUCTIONS FOR 3-STEP
Step 7
Insert BACK SUPPORT BAR,
PART P/O.
Make sure there are no gaps
between parts after inserting.
Insert 2 DOWELS, PART Q, as
shown, right .
(If inserting part is difcult put
a little dish soap on doweled
end before inserting.)
Step 8
Insert HIDDEN STORAGE
PANEL PART N/M.
Make sure there are no gaps
between parts after inserting.
Step 9
Attach RIGHT PANEL. Align all holes before
pushing panel down. Make sure there are no gaps
between parts after inserting.
P
QQ
LEFT PANEL
N
LEFT PANEL