Petsafe 15201 User manual

Let’s make home sweet home even sweeter.
CozyUp™WOOD PET STEPS

What you have
B
B
D
E
C
A
A
14
x
12
x
12
x
4
x
4
x

1
Lay both side panels flat with side A facing up. Screw cam bolts into the threaded holes
in each side panel.

2
Insert wood dowels into the remaining holes in each side panel.

3
Connect the risers to one side panel with sides B facing inward.
Line up the holes in one end of each riser with the cam bolts and dowels in the side
panel. Note the two holes in each riser where you will insert the cam nuts.

4
Insert cam nuts into the holes in each riser next to where the panels are connected. (The
arrow on the cam nut should point toward the cam bolt.) Tighten the cam nuts to secure
the connections.

5
Connect the back panel to the side panel with side C facing inward. Secure the
connection with cam nuts.

6
Connect the remaining side panel and secure the connections with cam nuts. Attach the
self-adhesive feet to the four bottom corners and turn the steps upright.

7
Squeeze glue into the slots on the top edge of the side panels and place a wood biscuit
in each one. Starting at the top of the steps with tread E, attach each stair tread by
applying glue to the slots on the underside of the tread, lining it up with the wood
biscuits and pressing down.
Allow the glue to dry for several hours.

8
You’re almost there! Offer treats to gently encourage your pet to practice walking up
and down.
With a little patience and lots of praise, your pet
will soon be happy using the steps on his own!

1-Year Warranty
©2019 Radio Systems Corporation
Model: 15201 | Z400-2254
For important safety information, please see the customer care guide.
For questions or additional tips:
[phone]
petsafe.com
Let us help!