Petsafe ZIRF-100 Setup guide

Model Number
ZIRF-100
PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING
Indoor Radio Fence®
Operating and Training Guide OFF
ON
MAX.

2 1-800-732-2677
Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd.,
Radio Systems Australia Pty Ltd. and any other aliate or Brand of Radio
Systems Corporation may be referred to collectively as “We” or “Us.”
Important Safety Information
Explanation of attention words and symbols used in this guide
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION, used without the safety alert symbol, indicates
a hazardous situation which, if not avoided, could result in
harm to your pet.
NOTICE is used to address safe use practices not related
to personal injury.
Not for use with aggressive dogs. Do not use this product if
your dog is prone to aggressive behavior. Aggressive dogs can
cause severe injury or death to their owners and others. If you
are not sure that this product is right for your dog, please talk to
your veterinarian or a certied trainer.

www.petsafe.net 3
This System is NOT a solid barrier. The system is designed to
act as a deterrent, using static correction to condition pets to
remain outside of the established barrier area. It is important that
you reinforce training with your pet on a regular basis. Since the
tolerance level to static correction varies from pet to pet, Radio
Systems Corporation CANNOT guarantee that the system will in
all cases keep a pet outside of the established barrier area. Not all
pets can be trained to avoid entering the barrier area. Therefore, if
you have reason to believe that your pet may harm himself or pose
a danger to others if he is not kept from entering the barrier area,
you should NOT rely solely upon this system to restrict your pet.
Radio Systems Corporation shall NOT be liable for any personal
injuries, property damage, injury to or death of your pet, economic
loss or any consequential damages sustained as a result of any
animal entering the barrier area.
To prevent an unintended correction, do not perform set up
procedures while the receiver collar is on your pet.
- If you are using a collar and leash for training, be sure the
extra collar does not put pressure on the contact points
of the receiver collar.

4 1-800-732-2677
To avoid damage to the transmitter do not use on wet
surfaces, in damp or wet locations or around swimming
pools. This product is designed for indoor use only. Do not
expose to rain or snow.
Thank you for choosing PetSafe® Brand. You and your pet deserve
a companionship that includes memorable moments and a shared
understanding together. Our products provide you with the tools and
technologies to successfully train your pet. If you have any questions about
our products or training your pet, please visit our website at www.petsafe.net
or contact our Customer Care Center at 1-800-732-2677.
To get the most protection out of your warranty, please register your product
within 30 days at www.petsafe.net. By registering and keeping your receipt,
you will enjoy the product’s full warranty and should you ever need to call the
Customer Care Center, we will be able to help you faster. Most importantly,
we will never give or sell your valuable information to anyone. Complete
warranty information is available online at www.petsafe.net.

www.petsafe.net 5
Inside the Box
• Barrier transmitter
• Power adapter
• Operating and training guide
Other Items Needed (Not Included)
• PetSafe®compatible In-Ground Fence™receiver collar models include:
–Deluxe UltraLight™receiver collar
–Stubborn Dog In-Ground Fence™receiver collar
–Premium Little Dog receiver collar
–Deluxe In-Ground Cat Fence receiver collar
–Rechargeable In-Ground Fence™receiver collar
Other Items You May Need
• Non-metallic collar and leash

6 1-800-732-2677
How the System Works
The PetSafe®Indoor Radio Fence®can keep your pet out of a certain room,
away from a trash can or o of a piece of furniture. Just place the barrier
transmitter near the area that your pet should avoid. The barrier transmitter
sends a spherical radio signal that covers a radius between 2 and 10 ft.
Your pet wears a receiver collar (not included) with contact points that
touch his neck. When your pet enters the barrier area, he will hear a series of
audible tones from the receiver collar, and he will feel a safe static correction,
delivered through the contact points on his neck. The static correction will
get his attention, but will not cause harm. The correction continues until your
pet leaves the barrier area. If your pet doesn’t leave, the collar will continue to
correct until the collar times out.
Key Definitions
Barrier transmitter:
Transmits the wireless
radio signal.
Barrier area:
The area that you want
to prevent your pet from
gaining access to.
Barrier
Transmitter
Barrier
Area
Receiver
Collar
2
3
OFF
ON
MAX.
On ButtonPower Outlet
Dial Button
(2 to 8)

www.petsafe.net 7
Operating Guide
STEP 1
Install the Barrier Transmitter
The barrier transmitter emits a radio signal from all sides in a spherical
pattern. The signal will transmit through a wall or the ceiling/oor. The barrier
transmitter is designed to be placed laying at on a surface.
Do not:
• Place the barrier transmitter on metal surfaces.
• Place the barrier transmitter near large metal objects such as refrigerators,
washing machines, etc.
• Place the barrier transmitter near audio speakers.
To avoid damage to the transmitter do not use on wet surfaces, in damp
or wet locations or around swimming pools. This product is designed for
indoor use only. Do not expose to rain or snow.

8 1-800-732-2677
STEP 2
Set Up the Barrier Transmitter
To prevent an unintended correction, never perform setup
procedures while your pet is wearing the receiver collar.
1. Plug the power adapter into the power jack and a standard 120 volt outlet.
2. Adjust the dial clockwise from 2 to 8. The power light will turn red
indicating that the unit is turned on.
3. You can create a barrier area from 2 ft. in radius up to 10 ft. in radius by
adjusting the dial from 2 (minimum range) to 8 (maximum range).
3
4
OFF
ON
MAX.

www.petsafe.net 9
STEP 3
Test the Barrier Area
1. Refer to your receiver collar operating
guide for setup instructions and proper
use of the test light tool.
2. Place the test light tool that came
with your In-Ground Fence™system
on the contact points of the receiver
collar. Hold the receiver collar at the
approximate height of your dog’s
neck (3A). Start outside of the range
and walk slowly toward the barrier
transmitter. As you reach the barrier
area, the receiver collar emits a series
of high-pitched tones. For each tone
you hear, you should notice the test
light flashing, which indicates that a
static correction is being delivered. The receiver collar’s tone is easily
heard by dogs, but may be difficult for us humans to hear.
3. Check the range of the barrier area from multiple angles to ensure that
you are getting the desired coverage.
3A

10 1-800-732-2677
Note: If you find that you are not getting the desired range at the maximum
setting, move the barrier transmitter a few feet. Metal objects can alter the
magnetic field and change the transmitting signal range. The effect on the
range depends on the size and shape of the objects. Signal range can be
reduced if the barrier transmitter is placed on a concrete floor, due to steel
reinforcement in the concrete. For best range results, place the barrier
transmitter on a nonconductive surface, like a wood floor or table. Placing
the barrier transmitter beneath sofas and beds can reduce the range due to
the metal springs altering the magnetic field.
3
4
OFF
ON
MAX.
Tabletop
Placement