Philips AVENT SCF358 User manual

SCF358
EN User manual 2
ES-MX Manual del usuario 19
FR-CA Mode d’emploi 38
PT-BR Manual do utilizador 57

2ENGLISH
Contents
IMPORTANT SAFEGUARDS 3
Introduction 6
Instructions for use 6
Cleaning and descaling 14
Disposal 16
Troubleshooting 16
Warranty and support 18

3ENGLISH
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
Read all instructions.
Danger
- To protect against electrical shock, do not immerse the
cord, plug or appliance in water or other liquid.
Warning
- Only use the appliance indoors.
- Do not let the power cord hang over the edge of a table
or worktop. Store excess cord in the base of the bottle
warmer.
- A short power-supply cord is provided to reduce the risk
resulting from becoming entangled in or tripping over a
longer cord.
- If extension cord is used: The cord should be arranged
so that it will not drape over the countertop or tabletop
where it can be pulled on by children or tripped over
unintentionally.
- The marked electrical rating of the cord set or extension
cord should be at least as great as the electrical rating of
the appliance.
- Keep the power cord away from hot surfaces.
- Only connect the appliance to a grounded wall socket.
Always make sure that the plug is inserted into the wall
socket properly.
- Before you connect the appliance, check that the voltage
indicated on the bottom of the appliance corresponds to
the local voltage.
- If you need to use an extension cord, make sure it is
a grounded extension cord with a rating of at least
13 amperes.

4ENGLISH
- Extension cords may be used if care is exercised in their
use.
- Do not use the appliance if the plug, the power cord
or the appliance itself is damaged. If the power cord is
damaged, you must have it replaced by Philips, a Philips
authorized service center or similarly qualied persons in
order to avoid a hazard.
- Do not place the appliance on or near a hot gas or
electric cooker, or in a heated oven.
- This appliance can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved.
- Children must not play with the appliance.
- Close supervision is necessary when any appliance is
used by or near children.
- Do not spill water on the power plug.
- Only use the appliance as described in the user manual
to avoid injury due to misuse.
- Do not preheat the appliance.
- Always place a fully assembled bottle with cap in the
bottle warmer before you add water.
- Make sure you add water before you switch on the bottle
warmer.
- Hot water can cause serious burns. Be careful when the
bottle warmer contains hot water.
- The accessible surfaces of the appliance may become
hot during use and are subject to residual heat after use.
- Do not move the appliance when it contains hot water.
- When the food or milk has reached the required
temperature, remove the bottle or container from the
bottle warmer.

5ENGLISH
- If the appliance is of the grounded type, the cord set or
extension cord should be a grounding-type 3-wire cord.
- Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking o parts.
- The use of accessory attachments not recommended by
the appliance manufacturer may cause injuries.
- To disconnect, turn any control to “o”, then remove plug
from wall outlet.
- Before serving be sure food is at safe temperature.
- Before serving, unplug cord form wall outlet and dish. Do
not leave cord within child’s reach.
Caution
- This appliance is intended for use in household.
- The food should not be heated for too long.
- Always check the food temperature before you feed
your child. Gently swirl the bottle and check by sprinkling
a few drops on the inside of your wrist. (Follow the
instructions in section ‘‘Feed your baby the milk’’.)
- Unplug the appliance when it is not in use.
- The surface of the heating element is subject to residual
heat after use.
- Let the appliance cool down before you clean it.
- Follow the descaling instructions to avoid irreparable
damage.
- Do not try to open or repair the appliance yourself.
Contact the Philips Consumer Care Center in your
country (see www.philips.com/support).
SAVE THESE INSTRUCTIONS
The production date code YYWW is located in the cord storage compartment in the
base of the bottle warmer.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.

6ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips Avent! To fully benet
from the support that Philips Avent oers, register your product at
www.philips.com/welcome.
With this bottle warmer, you can warm and defrost milk in Philips Avent and other
most common branded feeding bottles and baby food in containers.
To help preserve the quality of your breast milk, it is important to warm the milk
in a safe and controlled way. The built-in sensor tracks the temperature to avoid
overheating.
Instructions for use
Product overview
A
B
CD
F
E
A Bottle warmer D Keep warm / defrost setting
B Progress indicator E Milk volume setting
C Baby food warming setting F On / o button

7ENGLISH
Explanation of settings
Milk volume
• Select the milk volume you want to warm. You
can set from 30 ml / 1 oz up to 330 ml / 11 oz.
The bottle warmer warms the milk to
approximately body temperature. It then
switches to keep warm mode automatically for
about 60 minutes.
Baby food warming
• Select this setting to warm baby food.
Keep warm / defrost
• The built-in sensor detects the milk / baby
food temperature to nd the optimal setting. If
the milk / baby food is warm, it will be warmed
gradually and kept at the right temperature.
If the milk / baby food is frozen, it will be
defrosted to liquid state and then warmed to
the right temperature.
When the entire progress indicator is on but not ashing, the milk / food is ready
for feeding. Feed your baby when the milk / food is warmed. Do not rewarm the
milk / food after it has cooled down, as bacteria may start to develop in it.
Warm milk
1 Place the bottle in the bottle warmer. Fill with drinking water to the level of
the milk. If you have a large volume of milk, ll with water to approximately
1 cm below the top of the bottle warmer.
2 Select the desired setting based on the milk volume and press the on / o
button to switch on.
7
210
7oz
210ml

8ENGLISH
3 The progress indicator ashes gradually to show the progress of milk
warming.
4 When the entire progress indicator lights up continuously, the milk is ready
for feeding and the bottle warmer automatically switches to keep warm
mode.
5 The bottle warmer switches o automatically after about 60 minutes,
including warming time. The progress indicator turns o.
60 min
Tip
• If you want the milk warmer, keep the bottle in the appliance until it reaches the desired
temperature after the entire progress indicator lights up.
• If you are using a milk bag, select the keep warm / defrost setting because it takes less
power to warm milk bags.
• If you are using a silicone bottle, it takes longer to warm milk. Keep it in the bottle warmer
for 3-4 minutes after the entire progress indicator lights up.
Recommended setting for dierent containers
Container Recommended Setting
Plastic Milk volume setting
Glass Milk volume setting
Silicone Milk volume setting + 3-4 minutes
Milk bag Keep warm/ Defrost setting
Check the instructions of your milk bag and make sure it can be warmed in a bottle
warmer.
Note
• The time to warm milk depends on the volume, initial temperature and bottle material.

9ENGLISH
Feed your baby the milk
Press the on / o button to switch o the appliance and take out the milk bottle.
Note
• If you are using a small bottle, such as a 2 oz bottle, be careful to avoid touching the hot
water when you remove the bottle.
Always check the temperature of the milk before you feed your baby. Gently swirl
the bottle and check by sprinkling a few drops on the inside of your wrist.
Reuse the bottle warmer right away for another bottle
If you want to warm another bottle, let the bottle warmer cool down for a few
minutes. To speed up, ll the bottle warmer with fresh cold water.
When you switch on the bottle warmer, the progress indicator ashes gradually to
indicate that the appliance is warming again.
Note
• If the progress indicator is on but not ashing, the bottle warmer is still too hot to warm
another bottle. Switch o the bottle warmer and let it cool down for a few minutes.

10 ENGLISH
Warm baby food
1 Place the baby food container in the bottle warmer. Fill with drinking water
to the level of the baby food. If you have a large volume of baby food, ll with
water to approximately 1 cm below the top of the bottle warmer.
2 Select the baby food warming setting and press the on / o button to switch
on.
3 The progress indicator ashes to show it is in the warming process.
Note
• Due to variations in baby food consistency, it is not possible for the appliance to detect
precisely how long the baby food should be warmed.
4 Stir the baby food while the jar or container is in the bottle warmer. For
optimal result, check its temperature while it is warming up.
» Be careful not to burn your ngers when holding the container or jar while
stirring.
5 When the entire progress indicator lights up continuously, the baby food
is ready for feeding and the bottle warmer automatically switches to keep
warm mode.