3
1
2
Push
30~60N
LED
Check
power
4 5
2b ANSI C136.41
violet
grey
red
L
N
Driver
DA- / 1-10V-
DA+ / 1-10V+
L
N/L2
50/60 Hz
black
white
Speci�cation Sheet
DNote
There shall be an external fuse or MCB in the Line connection
with a current rating of 16A or less.
DNote
RF node can only be used in overvoltage category II environment
classified as IT equipment.
to change without notice. No representation or warranty as to the
accuracy or completeness of the information included herein is given
and any liability for any action in reliance thereon is disclaimed. Philips
Philips N.V. All other trademarks are owned by Signify Holding or their
respective owners.
4422 951 87261 8 December 2021 www.philips.com/lighting
4A at 120 Vac or 3A at 277 Vac
DÉCLARATION DE CONFORMITÉ À LA FCC/IC
Ce dispositif est conforme à la partie 15 des règles de la Federal
Communications Commission (FCC) des États-Unis et d’Industrie Canada
aux deux conditions suivantes: (1) Ce dispositif ne doit pas provoquer
y compris le brouillage pouvant entraîner un mauvais fonctionnement.
par Signify, sont susceptibles d’annuler le droit de l’utilisateur à se servir
de cet équipement. Ce produit est exclusivement destiné à un usage
commercial.
Cet équipement est conforme aux limites d’exposition aux rayonnements
IC établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 200 mm de distance entre la
source de rayonnement et votre corps.
FR
FCC/IC compliance statement
This device complies with part 15 of the FCC rules for the United States
and Industry Canada (IC) license-exempt RSS standard(s). Operation is
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
void the user’s authority to operate this equipment. This product is
intended for commercial use only.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
This equipment must be installed and operated with a minimum distance
200 mm between the radiator and your body.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set
forth for an uncontrolled environment.
This equipment must be installed and operated with a minimum distance
200 mm between the radiator and your body.
FCC statement: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
EN
