Philips Streamium NP2900/37 User manual

Philips Streamium Network Music Player
Quick start guide
NP2900
1
2
3
Overview
Connect
Enjoy
Register
4
np2900_qsg_37_01eng.indd 1 3/20/2009 5:17:05 PM

Please read and accept our Streamium terms & conditions as well as the Software End
User License Agreement that are included in the User Manual.
Register your product and get support at
www.philips.com/welcome
np2900_qsg_37_01eng.indd 2 3/20/2009 5:17:05 PM

1
EN
What’s in the box
Remote control
2 x AAA batteries
1 x AC power
adapter with cable
1 x Wall mounting
bracket
CD-ROM
containing user
manual and
software
Philips Streamium Network Music Playe r
Quick start guide
1
2
3
Overview
Connect
Enjoy
NP2900
Quick start guide
Streamium Network Music Player NP2900
Before using the remote control:
Insert batteries as shown.
np2900_qsg_37_01eng.indd 1 3/20/2009 5:17:07 PM

2
Overview
1
Front view
Displaya
Wi-Fi antennab
Loudspeakersc
Top view
ya (On / Standby / Eco standby)
s
b (mute the sound)
+VOL-
c (adjust the volume)
Rear view
pa jack
DIGITAL OUTb (black) jack
AUX IN L / R
c (red/white) jacks
POWER SUPPLY
d jack
ETHERNET
e jack
np2900_qsg_37_01eng.indd 2 3/20/2009 5:17:08 PM

3
EN
Remote control
a y(On / Standby)
b BRIGHTNESS (adjust the
display illumination)
c AUX (select the external
source)
d ONLINE SERVICES
(go to the optional online
services menu)
e NOW PLAYING (go to
the current play screen)
f CLOCK (activate the time
display)
g FAVORITE (mark the
current station as favorite)
h 1 234 (navigate)
i OK (conrm)
j HOME (go to the Home
menu)
k 2; (play/pause current le /
SuperPlay™ current list)
l )K (skip to the next le)
m s(mute/unmute the sound)
n NOW PLAYING (go to
current play screen)
o +VOL-(increase/decrease
the play volume)
p Alphanumeric buttons
q CLEAR (press to delete the
last character entry / press
and hold to delete the whole
line entry)
r FULLSOUND (activate/
deactivate FullSound™)
s DBB (activate/deactivate
Dynamic Bass Boost)
t SNOOZE (stop the alarm
sound for 15 minutes)
u SLEEP TIMER (toggle
through the sleep timer
options)
v REPEAT (toggle through
the repeat play options)
w SHUFFLE (activate/
deactivate the random order
play)
x LIVINGSOUND
(deactivate/activate
LivingSound™)
y EQ (toggle through the
preset equalizer options)
z a/A (change shift for the
alphanumeric entry)
{ +RATE- (increase/decrease
rating of current music)
| 9(stop)
} J( (skip to the previous le /
clear last entry)
~ BACK O(go back to the
previous screen)
SEARCH (search les)
€ DEMO (activate the demo
play)
SETTINGS (go to the
Settings menu)
‚ INTERNET RADIO (go to
the Internet radio menu)
ƒ MEDIA LIB. (go to Media
Library)
np2900_qsg_37_01eng.indd 3 3/20/2009 5:17:09 PM

4
Connect
2
Connect the player to the power supply
Connect the player to a home network
Wirelessly stream music and pictures from a computer
A
A
BC
B
C
np2900_qsg_37_01eng.indd 4 3/20/2009 5:17:09 PM

5
EN
START HERE…
This is how to navigate and select with the remote control:
Press• 3or 4to select a menu option.
Press• OK to confirm a selection.
Press• BACK Oto go back to the previous screen.
Press• HOME to go to the Home menu.
The alphanumeric buttons of the remote control are multi-function buttons:
To select a number or an alphanumeric character, press a button once or more until you•
see the number or alphabetic character in the display of the player.
To cycle through the alphanumeric characters that are available, press a button repeatedly.•
To delete the last character entry from the display, press• CLEAR.
To delete the whole line entry, press and hold• CLEAR.
This section describes the most commonly used wireless home network setup.
(For instructions on how to create a ‘wired’ connection, refer to the user
manual.)
When you connect the player to a home network with broadband Internet access:
You can listen to Internet radio•
You can connect to the Internet for firmware updates•
Important! For rst-time setup, ensure your network name and network password or
the encryption key are available.
np2900_qsg_37_01eng.indd 5 3/20/2009 5:17:09 PM

6
B
This icon indicates steps on your remote control!
Connect the player to the power supply
Connect the player to the power supply as shown in the diagram on page 4.
After a short introduction demo, the player prompts you to select the location.
Select the location / time zone and conrm.1
The player shows the prompt for the network connection.>
2 Select [Yes], to create a connection to the network.
The player shows the prompt for the network setup (if no network>
has been set up yet).
• Select [No] to exit the setup and go to the Home menu.
Connect the player to a home network
Here is how to create a wireless connection to your home network with
broadband Internet access
The onscreen display guides you through the process of connecting the player.This
section describes the typical wireless setup with automatic IP address. For information
on different setups, consult the user manual.
Ensure that your network name and network password or encryption key are1
available.
Turn on your wireless access point or wireless router with broadband Internet access.2
3 Follow the steps in section (A) and select [Ye s ], to create a connection to the
network.
Select [4 Wireless (WiFi)] to start the network setup process.
For wireless routers with Wi-Fi protection system (WPS) that supports push•
button configuration (PBC): On the router, press the WPS PBC push button (often
displayed as ) to activate. On NP2900 press OK to confirm.
For wireless routers with Wi-Fi protection system (WPS) that supports a personal•
identification number (PIN): On NP2900 select WPS PIN, then enter the displayed
PIN on the router.
For other wireless routers:•
NP2900 searches for networks.>
Use the remote
control.
A
np2900_qsg_37_01eng.indd 6 3/20/2009 5:17:10 PM

7
EN
Select your network from the list of found networks and confirm.5
Enter the encryption key (if required) and confirm.6
(press CLEAR to delete last character entry /
press hold CLEAR to delete line entry)
The player>
acquires the automatic IP address;
shows the conrmation for the connection to the network;
shows the prompt for the connection to the Internet.
Select [7 Yes] to connect to the Internet.
The player shows the conrmation for the connection to the Internet.>
You can go to section Enjoy and listen to Internet radio at this point.
This icon indicates steps on your remote control!
Here is how to create a wireless connection any time ‘after’ the initial setup:
Ensure that your network name and network password or encryption key are available.1
Turn on the player.2
Turn on your wireless access point or wireless router with broadband Internet access.3
Press4 SETTINGS, to go to the Settings menu.
Select [5 Wireless (WiFi)] to start the network setup process.
For wireless routers with Wi-Fi protection system (WPS) that supports push•
button configuration (PBC): On the router, press the WPS PBC push button (often
displayed as ) to activate. On NP2900 press OK to confirm.
For wireless routers with Wi-Fi protection system (WPS) that supports a personal•
identification number (PIN): On NP2900 select WPS PIN, then enter the displayed
PIN on the router.
For other wireless routers:•
NP2900 searches for networks.>
np2900_qsg_37_01eng.indd 7 3/20/2009 5:17:10 PM

8
Wirelessly stream music and pictures from a computer
You can wirelessly stream music to the NP2900 from a connected computer, if you install
TwonkyMedia™ on the computer and congure the computer to share your music.
(If TwonkyMedia™ is already installed on the computer, you can skip the installation
section and continue with the conguration. For any other media players, refer to the
instructions supplied with the player.)
On the computer, insert the supplied software CD.1
Installation starts.>
Follow the instructions on the computer to install the software.
Select your network from the list of found networks and confirm.6
Enter the encryption key (if required) and confirm.7
(press CLEAR to delete last character entry /
press hold CLEAR to delete line entry)
The player>
acquires the automatic IP address;
shows the conrmation for the connection to the network;
shows the prompt for the connection to the Internet.
Select [8 Yes] to connect to the Internet.
The player shows the conrmation for the connection to the Internet.>
C
This icon indicates steps on your remote control!
np2900_qsg_37_01eng.indd 8 3/20/2009 5:17:10 PM