Philips SalonStraight Pro XL HP4667/00 User manual

SalonStraight Pro XL
HP4667/00

2

3
H
B
ACDEF G
J
IK
1

4

HP4667/00
ENGLISH 6
INDONESIA 13
한국어 20
BAHASA MELAYU 27
ภาษาไทย 34
 39
繁體中文 46
简体中文 52

6
Introduction
The new Philips SalonStraight Pro XL straightener provides long-lasting
professional straightening results.The professional styling temperature
combined with ultra-smooth ceramic plates and even heat technology
provides superior and long-lasting straight styles.The adjustable
temperature allows you to personalise the straightener to obtain optimal
results to suit your hair type.
General description (Fig. 1)
ADigital LED display
BSelected temperature setting
CUsage time
DReady indication
E- button to decrease the temperature setting
FOn/off button
G+ button to increase the temperature setting
HCeramic plates
IClosing lock
JSwivel cord
KHanging loop
Important
Read this user manual carefully before you use the appliance and save it
for future reference.
Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
Check the condition of the mains cord regularly. Do not use the
appliance if the plug, the cord or the appliance itself is damaged.
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
Keep this appliance away from water. Do not use it near or over
water contained in baths, washbasins, sinks etc.When you use the
appliance in a bathroom, unplug it after use.The proximity of water
presents a risk, even when the appliance is switched off.
-
-
-
-
ENGLISH

For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom.This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
Keep the appliance out of the reach of children.
The straightening plates and the plastic parts near the plates reach a
high temperature quickly. Prevent the hot surfaces of the appliance
from coming into contact with your skin.
Only use the appliance on dry or damp hair.
Do not leave the plates in your hair for more than a few seconds at a
time as this may cause damage to your hair.
Keep the appliance away from non-heat-resistant surfaces and never
cover the appliance with anything (e.g. towel or clothing) when it is
hot.
For safety reasons, the straightener automatically switches off after
having been on for 1 hour.
Always unplug the appliance after use.
Do not wind the mains cord round the appliance.
Wait until the appliance has cooled down before you store it.
Keep the straightening plates clean and free of dust, dirt and styling
products such as mousse, spray and gel. Dust, dirt and styling
products may cause damage to the ceramic-coated straightening
plates.
Always return the appliance to a service centre authorised by Philips
for examination or repair. Repair by unqualied people could cause
an extremely hazardous situation for the user.
The plates have a ceramic coating.This coating slowly wears away
over time.This does not affect the performance of the appliance.
If you use the appliance on colour-treated hair, the straightening plates
may stain.
The maximum temperature occurs just after heating up.The actual
temperature during use may be lower.
Keep the appliance away from ammable items.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7

Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Preparing for use
Washing
The straightener gives the best results on well-washed hair.We advise you
to follow the washing tips below:
1 Wet your hair thoroughly for 30-60 seconds.
2 Pour some shampoo into the palm of your hand. Spread it between
your hands and distribute it evenly through the hair.
3 Gently massage your hair and scalp. Do not rough up the hair or
pull up long hair onto the scalp, as this may cause tangles.
4 Massageyourscalpwithyourngertips.Thisstimulatesblood
circulation and is gentler to the hair cuticles.
5 Rinse your hair thoroughly, as poor rinsing can result in dull hair.
Finish with a cold rinse for extra shine.
Drying
To get super-smooth results, it is essential to prepare your hair for
straightening. Dry you hair properly with a hairdryer to ensure a
professional, smooth nish.
1 After washing, squeeze excess water out of the hair with your
hands and then towel-dry the hair. Use a comb to disentangle hair
gently from the roots to the tips.
2 Divide the hair into sections using clips. Start at the back.
3 Todryeachsection,pullastraighteningbrushdownthehairlength.
Follow the brush with the hairdryer, with its nozzle pointing
towards the hair ends.
ENGLISH8

4 Whenyouhavenisheddryingeachsection,setthehairdryerto
thecoolsettingforanalcoolshot.Thisclosesthecuticlesand
adds shine to the hair.
Tip:Philips Salon Pro hairdryers have a lower drying temperature and a
stronger airow than regular dryers. Thanks to this combination, they dry just
as quickly as regular hairdryers but in a gentler way.
Using the appliance
Never leave the appliance unattended when it is plugged in.
Always put the appliance on a heat-resistant surface when it is heating
up and when it is hot.
Straightening
Straighteners are powerful styling tools and must always be used with
care. As with all straighteners that reach salon-high temperatures, do not
use the appliance frequently to avoid damage to the hair.
If you use the straightener incorrectly or if you use it at the wrong
temperature setting, you could overheat your hair or even burn it.
Always follow the steps below:
1 Put the plug in the wall socket.
2 Press the on/off button.
Thetemperaturesettingof110appearsonthedisplay(Fig.2).
As soon as the appliance has heated up to this setting, the word
‘READY’ appears on the display.
Tip:If you lock the plates with the closing lock, the straightener heats up
more quickly.
3 Select a temperature setting that is suitable for your hair type.
Select a low temperature setting when you use the straightener for
the rst time.
For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
-
-
,
,
-
-
ENGLISH 9

For ne, medium-textured or softly waved hair, select a medium to
low setting (160 and down).
Takeextracarewithpale,blonde,bleachedorcolour-treatedhair,since
it is susceptible to damage at high temperatures.
4 Press the + button to increase the temperature setting or press
the-buttontodecreasethetemperaturesetting(Fig.3).
Thedisplayshowstheselectedtemperaturesetting.
When the appliance has heated up to the selected setting, the word
‘READY’ appears on the display.
Thebarsonthedisplayshowtheremainingusagetimeofthe
appliance.Thetotalusagetimeis60minutes.Everytenminutesone
of the six bars disappears.
5 Comb or brush your hair so that it is disentangled and
smooth.(Fig.4)
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Tip:it is better to section off the crown area and to straighten the hair
underneath rst, followed by the top area.
6 Takeasectionthatisnotwiderthan5cm.Placeitbetweenthe
straighteningplatesandpressthehandlesoftheappliancermly
together.
7 Slide the straightener down the length of the hair in 5 seconds,
from root to hair end, without stopping to prevent
overheating.(Fig.5)
8 Repeat this process after 20 seconds until you have achieved the
desired look.
9 Let your hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.
-
,
,
,
ENGLISH10