Phoenix NEXT PLUS LS7010 User manual

NEXT PLUS
LS7010
Operating
Instructions

2
Contents Page
1 Batteries 3
2 Open with Code 4
3 Set User Code 4
4 Register Fingerprints 5
5 Open with Fingerprint 5
6 Delete Fingerprints 6
7 Locking 6
8 Multi mode 7
9 Dual mode (Fingerprint + Code) 8
10 Dual mode (Code + Code) 9
11 Code and Sound Hide 10
Contents
FOR SAFETY
Prior to using the safe, please read the instructions carefully.
Cautions when placing the safe.
• The safe is heavy and should be handled very carefully.
• Never move the safe with the door open.
• Place the safe on at oor.
Cautions when using the safe.
• Be careful not to slam the door closed.
• Be careful not to trap hands or ngers when closing door.
• As the safe is heavy and operated with a smart digital lock, it is not recommend
that children operate the safe.
• Be careful not to forget the user code, and keep the instruction outside of the
safe.

3
Components
Prior to using safe
1) Hold the digital lock and turn it anti-clockwise to open.
2) Load 4pcs of AA Alkaline batteries.
(LED ickers, Bi Bi Bi sound, Melody rings 1 second)
The batteries must be replaced if
1 ) When touching the pad, LobAtt appears on the display.
2) The battery icon alights on the pad.
* Battery life span : 1 year (Average openings 3 times a day)
* Even when the batteries are completely exhausted, the
registered codes and ngerprints are not erased.
Instructions Drawer Shelf Shelf Clips
(4pcs)
1.5V Alkaline
AA Batteries
(4pcs)
Memory Button
Digital Lock
Door Panel
1. Batteries

4
2. Open with Code
NOTE: If a wrong code is entered, bi-ric will sound and ErrOr will show on the display.
Paralysis: If a wrong code is entered 5 times, the lock will be paralyzed for 5 minutes.
1) No response from the touch pad.
2) Remaining paralysis time will be shown on the display as min-sec
e.g. 4 minutes and 29 seconds will display as “4_29”.
3) After 5 minutes, the paralysis will end.
Scramble Numbers: The code can be disguised by inserting random numbers either before,
after or both before and after the user code. E.g. user code of 1234, xxx1234#, 1234xxx# or
xxx1234xxx#. Total of 32 numbers can be accepted.
3. Set User Code
NOTE: 1) Prior to closing the door, please check the new code has been registered correctly
by following 2. Open with Code.
2) It is not recommended to use codes such as a telephone number, birthday or
consecutive numbers for security reasons.
1 ) Touch
(Bi sound, Pad lights up)
2 ) Enter
(Bi sound)
(Factory Code 1 2 3 4)
3 ) Touch
(Melody, on display)
4 ) Turn handle clockwise
and open the door
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Enter
(4 ~16 digits)
3 ) Touch
(Melody, good on display)
It is advisable to set a new code with the door open and test the new code before closing the door.
User Code
User Code
Pad
Touch Pad #
#
OPEnd
Open the Door
New CodeM #
New CodeM #

5
4. Register Fingerprints
NOTE: 1) Prior to closing the door, please conrm with 5. Open with Fingerprint if the
nger-print has been registered correctly.
2) Worn-out/impaired ngerprints may not be accepted, as they are dicult to read.
* 32 ngerprints can be entered.
5. Open with Fingerprint
NOTE: If an unregistered ngerprint is entered, bi-bi-bi will sound and ErrOr will show on the
display.
Paralysis: If unregistered ngerprints are entered 5 times, the lock will be paralyzed for 5 minutes.
1) No response from the touch pad.
2) Remaining paralysis time will be shown on the display as min-sec
e.g. 4 minutes and 29 seconds, 4_29.
3) After 5 minutes, the paralysis will end.
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Enter
(Bi sound)
Keep the door open.
5 ) Touch
(Blue light ickers)
6 ) Place a on to the
sensor.
(Melody rings, 1st , 2nd , good on display)
Place the user’s nger
on the sensor while the
blue lamp is ickering.
1 ) Touch
(Bi sound, Blue light ickers)
2 ) Put on sensor
(Melody, on display)
3 ) Turn handle clockwise
and open the door
User Code#
M 3
#3M User Code
Fingerprint 3 times
#
Fingerprint 3 times
Fingerprint
Touch Pad Open the Door
Pad Fingerprint
OPEnd
#

6
6. Delete Fingerprints
All the registered ngerprints are erased simultaneously.
7. Locking
Close the door, and turn handle anti-clockwise.
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter 4 ) Touch
(Melody, on display)
Keep the door open.
M #3#
M#
3
#
Close the Door
CLEAr

7
8. Multi user mode
Two users can independently open the safe with their own user code.
* Multi user mode and dual mode can not be used simultaneously.
NOTE: 1) 2nd user code must be different from 1st code.
2) Prior to closing the door, conrm the 2nd code has been registered correctly by
following 9. Multi mode > Open.
3) 2nd code can be changed in the same way as 9. Multi mode > Set.
4) For setting or changing the 1st code, please follow the instructions in 3. Set User
Code.
NOTE: When unsetting multi user mode the 2nd code is removed automatically. The 1st code will
be retained.
SET
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Enter
(4 ~16 digits)
5 ) Touch
(Melody, good on display)
UNSET
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter
(Bi sound)
4 ) Touch
(Melody, on display)
OPEN
1 ) Touch
(Bi sound, Pad lights up)
2 ) Enter 1st Code or 2nd Code
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Turn handle clockwise and
open the door
2nd Code
#
M 2 #
2nd Code#M 2 #
#M 2#
#M 2#
CLEAr
#
Pad
Touch Pad Open the Door1st Code or 2nd Code
#

8
9. Dual mode (Fingerprint + Code)
Code and ngerprint should be entered consecutively to open the safe.
* Dual mode and multi mode can not be used simultaneously.
NOTE: 1) Prior to closing the door, conrm the ngerprint has been registered correctly as
shown in 10. Dual mode (Fingerprint+Code) > Open.
2) Finger-print can be changed in the same way as 10. Dual mode (Fingerprint+Code)
> Set.
3) For setting or changing user code, please follow the instructions in 3. Set User Code.
NOTE: When unsetting dual mode, the registered ngerprint is removed automatically. The user
code will be retained.
SET
UNSET
OPEN
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) If there is no registered ngerprint
put Fingerprint on sensor
(Melody, good on display)
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter
(Bi sound)
4 ) Touch
(Melody, CLEAr on display)
1 ) Touch
(Bi sound, Pad lights up)
2 ) Put
on sensor (Melody)
3 ) Enter 4 ) Touch
(Melody, on
display)
5 ) Turn handle clockwise and
open the door
Fingerprint
M 5 #
M 5 #
M 5# #
M 5# #
User CodePad
#
OPEnd
Open the Door
User CodePad
Fingerprint #
Fingerprint

9
10. Dual mode (Code + Code)
Two different codes should be entered consecutively to open the safe.
* Dual mode and multi mode can not be used simultaneously.
NOTE: 1) 2nd code must be different from 1st code.
2) Prior to closing the door, conrm the 2nd code has been registered correctly as
shown in 11. Dual mode (Code+Code) > Open.
3) 2nd code can be changed in the same way as 11. Dual mode (Code+Code) > Set.
4) For setting or changing 1st code, please follow the instructions in 3. Set User Code.
NOTE: When unsetting dual mode, the 2nd code is removed automatically. The 1st code will be
retained.
SET
UNSET
OPEN
1 ) Press Button on
the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Bi sound)
4 ) Enter 2nd Code
(4 ~16 digits)
5) Touch
(Melody, good on display)
1 ) Press Button on the
back of the door. (Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter
(Bi sound)
4 ) Touch
(Melody, CLEAr on display)
1 ) Touch
(Bi sound, Pad lights up)
2 ) Enter 1st
Code
4 ) Enter 2nd
Code
6 ) Turn handle clockwise and
open the door
3 ) Touch 5 ) Touch
2nd Code#M 9 #
##
M9
#M 9 #
##M 9
Pad 1st Code # 2nd Code # Open the Door
Pad # #

10
11. Code and Sound Hide
SET
UNSET
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Enter
(Bi sound)
3 ) Touch
(Melody, Hide on display)
1 ) Press Button on the back of the door.
(Bi sound)
2 ) Touch
(Bi sound)
3 ) Enter 4 ) Touch
(Melody, CLEAr on display)
M 7
#7
#
M
M 7# #
#7 # M

Need support?
We’re here if you need us.
Web www.phoenixsafe.co.uk
Email [email protected]
Phone [phone]
Where peace of mind
is guaranteed.