Phonak Roger AudioHub User manual

This product may be purchased from Connevans Limited
secure online store at www.DeafEquipment.co.uk
DeafEquipment.co.uk
Offering you choice
Helping you choose
Connevans.info
Solutions to improve the quality of life

School:
Roger contact:
Date:
Teacher:
Phone:
Serial number:
1. Plug Roger AudioHub into power source.
2. Hold Roger microphone within 4 inches (10 cm) of Roger
AudioHub. Press Connect.
3. Connect Roger AudioHub to the audio source by plugging
the audio cable into Audio IN on the back of the Roger
AudioHub.
If plugging in only one source, use socket #1. Plug the
other end of the cable into the audio source, such as MP3,
TV, PC, etc.
4. Press and hold the Roger AudioHub’s power button for
2 seconds. Then start the audio source signal.
5. Volume should be adjusted first on the audio source’s, and
then on the Roger AudioHub.
Roger AudioHub indicator light
Solid red – Roger AudioHub is off
Solid blue – Standard operation mode
Blinking blue – Roger microphone is off or out of range
Solid green – Microphone is muted
Green to red – Volume is adjusting +/–
Blinking yellow – Software update
Blinking red – Call your Roger Contact
Alternating red/yellow – Cable is not correctly plugged in
www.eschooldesk.com
Connecting
Connecting Roger AudioHub
to Roger inspiro
Reference Sheet
3
5
2
4
1
V1.00/2013-06/na ©Phonak AG All rights reserved
MAX