Pickering 60-891-007 User manual

Simplified Diagram for the 60-891-007
12x12 Microwave Matrix
Pickering Interfaces’ 60-891-007 is a compact 50 Ω microwave
switching matrix with a maximum bandwidth of 18 GHz.
It is ideal for constructing complex microwave switching
systems for many applications. Connection is by high
performance front panel mounted N-type or SMA connectors.
The 60-891-007 matrix is constructed from interconnected
microwave tree multiplexers which alllows the routing of any
single input port to any single output port.
Controlling the Matrix
The 60-891-007 matrix is controlled through an LXI interface
based on Ethernet 1000Base-T. This provides a quick and
easy method of installing the unit and a simple way of
controlling it from a remote location through its API or built
in soft front panel. The ability to control the unit at a distance
allows the testing of systems without the need for a physical
presence.
Easy Repair
The construction of the 60-891-007 permits ease of assembly
and maintenance. All the cabling required to create the
switching configuration is contained within the unit for a neat
solution in a small form-factor.
Other Microwave Switching Configurations
Pickering Interfaces is able to offer other microwave
switching solutions, if you have a custom requirement for
switching please contact your local Pickering Interfaces sales
representative.
12x12 Matrix
X1
X2
X3
X4
X5
X6
X7
X8
X9
X10
X11
X12
Y3 Y2 Y1 Y6 Y4 Y7 Y8 Y9 Y10 Y11 Y12 Y5
Switch Path Manager
Our signal routing software, Switch Path Manager, automatically
selects and energizes switch paths through Pickering switching
systems. Signal routing is performed by simply defining test
system endpoints to be connected together, greatly accelerating
Test System software development.
To learn more, please go to: pickeringtest.com/spm
y12x12 RF Matrix With 18 GHz Bandwidth
yCompact 5 U Form Factor
yConstruction Permits Ease of
Assembly/ Maintenance
yCompatible With Switch Path
Manager for End to End Path Setting
yRelay Counting Available
yLXI Standard 1.5 Compliant
yIVI & Direct I/O Drivers
y3 Year Warranty
pickeringtest.com
60-891-007
LXI Microwave Matrix
Issue B June 2023

12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
12-Channel
Multiplexer
X1
X2
X3
X4
X5
X6
X7
X8
X9
X10
X11
X12
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
Y10
Y11
Y12
Detailed Diagram for the 60-891-007 12x12 Microwave Matrix
60-891-007
pickeringtest.com Page 2
LXI Microwave Matrix

Specification - 18GHz 12x12 Matrix
Configuration: 12x12 Microwave blocking matrix
Operate Time: Typically 15 ms
Characteristic
Impedance: 50 Ω
Connectors: N-type or SMA
Bandwidth DC to 18 GHz
Isolation: >120 dB
Insertion Loss
(typical): 7 dB (port X+Y)
3 dB (Y = 1)
4.5 dB (2 <= Y <=5)
9.5 dB (6 <= Y <= 11)
VSWR (typical
unless stated): 2.0:1 (typical) / 2.3:1 (max) (port X+Y)
2.0:1 (Y = 1)
2.5:1 (2 <= Y <=5)
2.8:1 (6 <= Y <= 11)
Typical Insertion Loss Plot for Matrix Paths
Typical VSWR Plot for Matrix Paths
60-891-007
pickeringtest.com Page 3
Specifications

Operating/Storage Conditions
Operating Temperature:
Humidity:
Altitude:
0 °C to +55 °C
Up to 90 % non-condensing
5000 m
Storage Temperature:
Humidity:
Altitude:
-20 °C to +75 °C
Up to 90 % non-condensing
15000 m
Safety & CE Compliance
All modules are fully CE compliant and meet applicable
EU directives:
Low-voltage safety EN61010-1:2010,
EMC Immunity EN61326-1:2013,
Emissions EN55011:2009+A1:2010.
Power Source
Universal AC mains supply, 90-120/200-240 V 50-60 Hz
Power Inlet: Male IEC connector
Power Rating: 100 VA maximum
Fuse Rating: 5 A, 250 V
LAN Interface
Compliant to LXI Standard 1.5, the 60-891-007 has a
1000Base-T Ethernet Interface via a standard RJ-45
connector mounted on the rear panel with an LCD display
showing the unit’s IP address.
Mechanical Characteristics
Supplied with front panel ears to enable rack mounting on a
shelf or other rear support mechanism.
Dimensions: Full 19” rack width, 21” depth, 5U high
3D models for all versions in a variety of popular file formats
are available on request.
Connectors
Signals via front panel N-type or SMA connectors.
Cooling
Cooling assisted by internal fans. Air is drawn in via front
panel intakes and expelled through vents in the rear panel.
LXI Status Indicators
Front panel mounted LEDs:
• Power
• Ready
• Error
• LAN
• Active
60-891-007
pickeringtest.com Page 4
Specifications

Support Products
Mating Connectors & Cabling
For connection accessories for the 60-891-007 multiplexer
please refer to the 90-011D RF Cable Assemblies data sheet
where a complete list and documentation can be found for
accessories, or refer to the Connection Solutions catalog.
Product Order Codes
LXI 12x12 Microwave Matrix, 50 Ω, 18 GHz
With SMA Connectors
With N-type Connectors
60-891-007-001
60-891-007-002
Product Customization
Pickering LXI units are designed and manufactured on our
own flexible manufacturing lines, giving complete product
control and enabling simple customization to meet very
specific requirements.
Customization can include:
• Alternative relay types
• Mixture of relay types
• Alternative number of relays
• Different performance specifications
All customized products are given a unique part number, fully
documented and may be ordered at any time in the future.
Please contact your local sales office to discuss.
Further LXI RF Switching Solutions from
Pickering Interfaces
60-721A LXI 72-Channel High Performance Video
Multiplexer with a 1 GHz bandwidth.
60-750/751 LXI Microwave Matrix. Bandwidth up to
20 GHz and is available in sizes from Single 3x3 up to
Dual 4x4 with Loop-Thru and termination options.
60-801/802 LXI Microwave Multiplexer, up to 40 GHz
bandwidth and support for up to 16 banks of 6 or 4
way multiplexers.
60-891-007
pickeringtest.com Page 5
Ordering Information

Switch Path Manager Signal Routing Software
Our signal routing software, Switch Path Manager (SPM), simplifies signal routing through switching systems and speeds up
the development of switching system software. Switch Path Manager supports our switching modules and the interconnection
between them. Once a switching system model has been created, signal routing can be performed by simply defining the
endpoints that are required to be connected together. The ability to automate signal routing results in simple and effective
switching system management, safe and fast. The short circuit detection feature avoids unwanted shorts between routes.
Switch Path Manager is available in a full version and a lower-cost lite version. For more informaion please visit our
Switch Path Manager web page.
SPM Features:
• Manages Complex Switching Systems
• Reduces Switching Software Development Effort
• Debug Monitor and Manual Control Capability
• Supports all Pickering PXI, LXI and PCI Switching
• APIs available for C, C++, .NET, LabWindows™/CVI and LabVIEW
• Windows 32-bit or 64-bit Compatible
• Free Evaluation License
• Provides Switching Safety Features, including Short Circuit Detection and Endpoint Protection - see below:
Switch Path Manager
Signal Routing Example
Short Circuit Detection - avoids shorting the blue path with the green path when trying to apply the red path via the 2-pole relay.
Endpoint Protection - prevents accidental connection of critical nodes such as Power or Ground (Y1, X2, X3) and (X5, X6, X7) are
attributed to different Protection Groups in SPM. The software will not allow pins in different groups to be connected together.
SPST
SWITCHES
MATRIX 1 MATRIX 2
X1 X2 X3
X4TPx
TPy
Route A
Route B
Route C
60-891-007
pickeringtest.com Page 6
LXI Microwave Matrix

60-891-007
pickeringtest.com Page 7
Supporting Products & Software
Connectors
& Backshells
Multi-way
Cable Assemblies
RF Cable
Assemblies
Breakouts
Connectivity Solutions
We provide a full range of supporting cable and connector solutions for all our switching
products—20 connector families with 1200+ products. We offer everything from simple
mating connectors to complex cables assemblies and terminal blocks. All assemblies are
manufactured by Pickering and are guaranteed to mechanically and electrically mate to our
modules. These accessories are detailed in Connector Accessories data sheets, where a
complete list and documentation can be found for each accessory.
Connector
Blocks
We also offer customized cabling and have a free online Cable Design Tool that can be used to create custom cable solutions for
many applications.
• Fully supported on modern browsers and tablet operating systems.
• Built-in tutorials and videos allow you to get quickly up to speed.
• Store cable assemblies in the Cloud and develop over time.
• Each cable design has a downloadable PDF documentation file
detailing all specifications
Start designing your custom cabling, go to pickeringtest.com/cdt
Mass Interconnect
We recommend the use of a mass interconnect solution when an Interchangeable Test Adapter (ITA) is required for PXI/LXI
based test systems. Our modules are fully supported by Virginia Panel and MacPanel.
Pickering Reed Relays
We are the only switch provider with in-house reed relay manufacturing capability
via our Relay Division. These instrument grade reed relays feature SoftCenter™
technology, ensuring long service life and repeatable contact performance.
To learn more go to pickeringrelay.com

60-891-007
pickeringtest.com Page 8
Supporting Products & Software
Programming
Pickering provide kernel, IVI and VISA (NI & Keysight) drivers which are compatible with all Microsoft supported versions of
Windows and popular older versions.
For more information go to pickeringtest.com/os
The VISA driver support is provided for LabVIEW Real Time Operating Systems (Pharlap and Linux-RT). For other RTOS support
contact Pickering. These drivers may be used with a variety of programming environments and applications including:
• Pickering Interfaces Switch Path Manager
• National Instruments products (LabVIEW, LabWindows/CVI, Switch Executive, MAX, TestStand, VeriStand, etc.)
• Microsoft Visual Studio products (Visual Basic, Visual C++)
• Programming Languages C, C++, C#, Python
• Keysight VEE and OpenTAP
• Mathworks MATLAB, Simulink
• Marvin ATEasy
• MTQ Testsolutions Tecap Test & Measurement Suite
Drivers for popular Linux distributions are available, other environments are also supported, please contact Pickering
with specific enquiries. We provide Soft Front Panels (SFPs) for our products for familiarity and manual control, as well as
comprehensive documentation and example programs to help you develop test routines with ease.
To learn more about software drivers and development environments go to pickeringtest.com/software
DMM+ R3a
S+ R3b
DMM- R3c
S- R3d
DMM
S+ S-
DMM+ DMM-
aX1 aX3
aX4
aX7 aX9 aX11 aX13 aX15 aX17 aX19 aX21 aX23 aX25 aX27 aX31
aY1
aY2
aY3
aY4
Switch 1
bY1
bY2
bY3
bY4
bY5
bY6
bY7
bY8
bX1 bX5 bX7 bX9 bX11 bX13 bX15 bX17 bX19 bX21 bX23
R3a R3b
R3c R3d
Switch 2 Device Under Test
Signal Routing Software
Our signal routing software, Switch Path Manager,
automatically selects and energizes switch paths
through Pickering switching systems. Signal
routing is performed by simply defining test
system endpoints to be connected together, greatly
accelerating Test System software development.
To learn more go to pickeringtest.com/spm

60-891-007
pickeringtest.com Page 9
Supporting Products & Software
© Copyright (2023) Pickering Interfaces. All Rights Reserved.
PickeringInterfacesmaintains acommitment tocontinuous productdevelopment, consequentlywe reservethe rightto varyfrom thedescription givenin thisdata sheet.
Diagnostic Relay Test Tools
eBIRST Switching System Test Tools are designed
specifically for our PXI, PCI or LXI products, these tools
simplify switching system fault-finding by quickly testing
the system and graphically identifying the faulty relay.
To learn more go to pickeringtest.com/ebirst
Three Year Warranty & Guaranteed Long-Term Support
All standard products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for
three years from the date of delivery to the original purchaser. Extended warranty and service agreements are available with
various levels for your requirements. Although we offer a 3-year warranty as standard, we also include guaranteed long-term
support—with a history of supporting our products for typically 15-20 years.
To learn more go to pickeringtest.com/support
Available Product Resources
We have a library of resources including success stories, product and support videos, articles and white papers as well as
application-specific brochures to assist you. We have also published reference books on switching technology and the PXI and
LXI standards.
To view, download or request any of our product resources go to pickeringtest.com/resources
B
B
IRST
IRST
e
e