Planet FSD-624SF User manual

- 1 -
4-Port 100Base-FX + 2 Gigabit Web Smart Switch
FSD-624SF
Quick Installation Guide

Quick Installation Guide for FSD-624SF
- 2 -
Package Content
Thank you for purchasing PLANET 4-Port 100Base-FX POF + 2 Gigabit
Web Smart Switch, FSD-624SF. Terms of “Switch” in following section of
this Quick installation guide means the FSD-624SF.
Upon open the box of the Switch and carefully unpack it. The box should
contain the following items:
The Switch x 1
This Quick Installation Guide x 1
User’s manual CD x 1
Power Adapter x 1
Rubber feet x 4
If any item is found missing or damaged, please contact your local
reseller for replacement.
Requirements
The FSD-624SF provide remote Web interface for manage; the following
equipments are necessary for further management.
Network cables:
Use standard network (UTP) cables with RJ45 connectors.
Subscriber PC installed with Ethernet NIC (Network Card)
The operate system of subscriber PC that running Windows 98/ME, NT4.0,
2000/XP, MAC OS9 or later, Linux, UNIX or other platform compatible with
TCP/IP protocols.

Quick Installation Guide for FSD-624SF
- 3 -
Start Web Management
The PLANET FSD-624SF provides a built-in browser interface. You can
manage the Switch remotely by having a remote host with Web browser,
such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.
The following shows how to startup the Web Management of the Switch,
please note the Switch is configured through an Ethernet connection,
make sure the manager PC must be set on the same IP subnet address,
for example, the default IP address of the Switch is 192.168.0.100 (the
factory-default IP address), then the manager PC should be set at
192.168.0.x (where x is a number between 1 and 254, except 100), and
the default subnet mask is 255.255.255.0.
Use Internet Explorer 5.0 or above Web browser, enter default IP address
http://192.168.0.100
To access the Web interface then the Web login screen appears in Figure 1

Quick Installation Guide for FSD-624SF
- 4 -
Figure 1. Web Login Screen of FSD-624SF
After entering the username and password (default user name and
password is “admin”) in login screen (Figure 1 appears). The Web main
screen appears as Figure 2.
Figure 2. Web Main Screen of FSD-624SF

Quick Installation Guide for FSD-624SF
- 5 -
Now, you can use the Web management interface to continue the Switch
management, please refer to the user manual for more.
#Notice:
For security reason, please change and memorize the new password after
this first setup.
While IP Address be changed or forgotten admin
password –
To reset the IP address to the default IP Address “192.168.0.100” and
the username /password to factory default mode (default user name and
password is admin). Press the hardware reset button at the rear panel
about 5 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of 192.168.0.xx and
default username / password.
Customer Support
Thank you for purchase PLANET products. You can browse our online
FAQ resource at the PLANET Website first to check if it could solve you
issue. If you need more support information, please contact PLANET
switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]
Copyright ©PLANET Technology Corp. 2008.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
Hardware Reset
CE
2010-A33190-000