Planet POE-1200 User manual

– 1 – – 2 –
– 3 – – 4 –
Thank you for purchasing PLANET 12/24-Port Web Smart
PoE Injector Hub,
● POE-1200/POE-1200P2/POE-1200G–12-PortPoEInjector
Hub
● POE-2400/POE-2400P4/POE-2400G–24-PortPoEInjector
Hub
Unless model number is specied, the term “PoE Injector
Hub” in the following sections means the series of the
products.
1. Package Content
Upon open the box of the PoE Injector Hub and carefully
unpack it. The box should contain the following items:
● ThePoEInjectorHubx1
● ThisQuickInstallationGuidex1
● User’sManualCDx1
● PowerCordx1
● RubberFeetx4
● Tworack-mountingbracketswithattachmentscrewsx1
If any item is found missing or damaged, please contact
your local reseller for replacement.
2. Requirements
The following equipments are necessary for further
management.
Network cables:
Usestandardnetwork(UTP)cableswithRJ45connectors.
SubscriberPCinstalledwithEthernetNIC(NetworkCard)
The operate system of subscriber PC that running Windows
98/ME, NT4.0, 2000/2003/XP/Vista, MAC OS9 or later,
Linux, UNIX or other platform compatible with TCP/IP
protocols.
3. Start Web Management
You can manage the PoE Injector Hub remotely by having
aremotehostwithWebbrowser,suchasMicrosoftInternet
Explorer,NetscapeNavigatororMozillaFirefox.
Web Smart PoE Injector Hub
RJ-45/UTP Cable
PC/Workstation
with
IE or Netscape Browser
Please note that the PoE Injector Hub is congured
through an Ethernet connection, make sure the manager
PC must be set on the same IP subnet address, for
example, the default IP address of the PoE Injector Hub is
192.168.0.100 (the factory-default IP address), then the
manager PC should be set at 192.168.0.x (where x is a
number between 1 and 254, except 100), and the default
subnetmaskis255.255.255.0.
Entering default IP address then the Web login screen
appearsinFigure1
DefaultIPAddress:192.168.0.100
DefaultAccount:admin
DefaultPassword:admin
Note
ThefollowingscreenisbasedonPOE-2400P4.
ForotherPoEInjectorHub,thewebscreenwill
thesameasPOE-2400P4.
Figure 1. Web Login Screen of PoE Injector Hub
After entering the user name and password in login screen.
TheWebmainscreenappearsasFigure2.
Figure 2. Web Main Screen of POE-2400P4
Note
For security reason, please change and
memorize the new password after this first
setup.

– 5 – – 6 –
4. While IP Address be changed or
forgotten admin password –
To reset the IP address to the default IP Address
“192.168.0.100” and the user name / password to factory
default mode by press the hardware reset button about
10 seconds. After the device is rebooted, you can login
the management Web interface within the same subnet of
192.168.0.xxanddefaultusername/password.
Hardware Reset button
5. Customer Support
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to
check if it could solve you issue. If you need more support
information, please contact PLANET switch support team.
PLANETonlineFAQ:
http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address:
[e-mail]
Copyright©PLANETTechnologyCorp.2009.
Contentssubjectstorevisionwithoutpriornotice.
PLANET is a registered trademark of PLANET Technology
Corp.  All other trademarks belong to their respective
owners.