PNI IP30 live Quick guide

PNI IP30 live
- Instructiuni de congurare / Conguration instructions / Kongurációs utasítások -

1
Camera PNI IP30 poate  accesata in trei moduri:
1. Prin aplicatia dedicata ”CamHi”, compatibila cu iOS si Android.
2. Prin software-ul pentru PC ”HiP2P Client”. Fisierul de instalare al software-ului si manualul
de utilizare pot  gasite pe CD-ul inclus in pachet, si pe pagina produsului de pe www.pni.ro.
3. Prin Internet Explorer.
Nota: Prin Internet Explorer camera poate  accesata doar daca va conectati la reteaua wi a
camerei.
Conectati PC-ul / laptop-ul la reteaua Wi a camerei. Accesati managerul de retele wireless si
cautati router-ul ”MIFI_3A38”. Conectati-va si introduceti parola “1234567890”
Deschideti aplicatia ”SearchTool” de pe CD. Apasati Next pentru Cautare. Apasati Refresh pentru
reimprospatarea dispozitivelor conectate. Apare camera PNI IP30 .
Copiati din fereastra asata adresa IP de forma: ”http://IP Adress: port” (ex: http://192.168.1.15:80)
si o lipiti in browser-ul Internet Explorer.
Asigurati-va ca nivelul de securitate este la minim / dezactivat, permisiunile ActiveX sunt validate,
si ca IP-ul este trecut la ”compatibility mode”.
De asemenea, la prima accesare a camerei din browser este nevoie sa instalati de pe prima
pagina “Setup Software”. Tot de pe prima pagina puteti schimba si limba interfetei in Engleza, din
optiunile din dreapta sus.
Accesati imaginile live si meniul camerei apasand butonul ”PC view”.
Ulterior aveti acces la meniul camerei, meniu complex si performant ce va ofera acces la o
multitudine de functii.
Note:
• Va recomandam sa nu modicati nimic, decat daca este cu adevarat necesar si intelegeti
pe deplin termenii, notiunile tehnice si optiunile existente in meniurile avansate. Aceste
congurari avansate necesita cunostinte de IT, congurare, retelistica si CCTV supraveghere
video.
• Accesarea si vizualizarea directa a imaginilor preluate de camera se pot face in modul
simplu si mult mai rapid folosind aplicatia pentru telefon ”CamHi” sau aplicatia pentru PC
”HiP2P Client”.
CONEXIUNI:
RO
Mufa alimentare
Iesire Audio
Intrare Audio
Buton Reset

2
INSTRUCTIUNI DE CONFIGURARE A CAMEREI PNI IP30, FOLOSIND APLICATIA
”CAMHI” SI CONEXIUNEA LA INTERNET PRIN MODEMUL INTEGRAT
1. Descarcati aplicatia ”CamHi” accesand App Store sau Google Play.
2. Alimentati camera la o sursa de curent.
3. Introduceti in interiorul camerei un micro SIM conform indicatiilor de mai jos:
Note:
• Inainte de a introduce SIM-ul in camera, vericati SIM-ul intr-un telefon mobil si asigurati-
va ca aveti semnal, ca nu aveti cod PIN( ca este dezactivat) si ca sunt active datele mobile.
• Recomandam folosirea unui SIM activ in reteaua Orange. In caz de nefunctionalitate, in
functie de furnizorul GSM , este posibil sa e necesara o congurare manuala a setarilor de
internet in Modemul ”MIFI_3A38” .
4. Conectati telefonul mobil la WiFi. Accesati ”Manage WIFI” si cautati router-ul ”MIFI_3A38”.
Conectati-va si introduceti parola ”1234567890”.
Slot card micro SD
Slot micro SIM

3
5. Deschideti aplicatia ”CamHi”. Apasati ”press add camera”, apoi ”Search camera UID from
LAN”.
Nota: Parola implicita corespunzatoare UID-ului camerei este ”admin”.
6. Pentru a schimba setarile implicite ale camerei, faceti click pe pictograma .
Statusul camerei trebuie sa e Online.

4
Dupa ce ati congurat cu succes camera, puteti sa o accesati de la distanta prin aplicatia ”CamHi”
conectand telefonul mobil la datele mobile oferite de SIM-ul propriu sau la reteaua WIFI la care
aveti acces.
Informatii utile:
1. Toata documentatia produsului: manuale produs, manuale aplicatii, certicat garantie, poate 
gasita si descarcata de pe pagina produsului: www.pni.ro .

5
PNI IP30 camera can be accessed in three ways:
1. Through the dedicated app ”CamHi”, compatible with iOS and Android.
2. Through PC software “HiP2P Client”. The software installation le and user manual can be
found on the CD included in the package, and from the product website: www.pni.ro
3. Through Internet Explorer.
Note: Through Internet Explorer, the camera can only be accessed by connecting to the wi
network of your camcorder.
Connect your PC / laptop to your Wi network. Go to your wireless network manager and look for
the “MIFI_3A38” router. Sign in and enter your password “1234567890”
Open the “SearchTool” application from the CD. Click Next for Search. Press Refresh to refresh
connected devices. PNI IP30 camera should be displayed in the list.
Copy the IP address: ”http://IP Adress: port” (ex: http://192.168.1.15:80) and paste it in Internet
Explorer.
Make sure the security level is minimized / disabled, ActiveX permissions are validated, and the
IP is switched to “compatibility mode”.
Also, when you rst access the browser, you need to install the Setup Software rst. You can also
change the interface language in English from the top right.
Access the live images and camera menu by pressing the “PC view” button.
Afterwards you have access to the camera menu, a complex and high-performance menu that
gives you access to a lot of functions.
Notes:
• We recommend not modifying anything unless it is really necessary and you fully understand
the technical terms and concepts and the options available in the advanced menus. These
advanced congurations require IT knowledge, conguration, networking and CCTV video
surveillance.
• Accessing and viewing images taken directly from the camera can be done in a simple and
quicker way using the “CamHi” phone application or “HiP2P Client” PC application.
CONNECTION:
EN
Power
Audio output
Audio input
Reset

6
PNI IP30 CAMERA CONFIGURATION INSTRUCTIONS, USING “CAMHI” APPLICATION
AND INTERNET CONNECTION VIA THE INTEGRATED MODEM
1. Download ”CamHi” from App Store or Google Play.
2. Plug the IP camera.
3. Insert a micro SIM inside the camera as shown below:
Notes:
• Before inserting the SIM inside the camera, check it on a mobile phone and make sure you
have signal, that you do not have a PIN code and that mobile data is active.
• We recommend the use of an active SIM in the Orange network. In some GSM providers case,
there migh be necesary to manualy congure internet settings in 4G Modem “MIFI_3A38”
4. Connect your mobile phone to WiFi. Go to “Manage WIFI” and look for the router “MIFI_3A38”.
Sign in and enter your password “1234567890”.
micro SD card slot
micro SIM slot

7
5. Open ”CamHi” app. Click ”press add camera”, then ”Search camera UID from LAN”.
Note: The defualt passowrd for the camera UID-ului is ”admin”.
6. To change the default camera settings, click the icon .
The camera status must be “Online”.

8
Once you have successfully congured the camera, you can access it remotely using “CamHi”
application by connecting your mobile phone to your mobile data provided by your own SIM card
or to the WIFI network you have access to.
Useful information:
1. All product documentation: product manuals, application manuals, warranty certicate can be
found and downloaded from the product page: www.pni.ro.