Poly EncorePro 300 Series User manual

EncorePro 300 Series
Corded Headset
User Guide

Contents
Overview 3
Setup 4
Load software 4
Fit 5
Adjust the headband 5
Position the boom 5
Adjust the boom 5
Basics 6
Make/take/end calls 6
Volume 6
Mute 6
Support 7
2

Icons Inline control LEDs Function
Call button Triple ash green Incoming call
Slow ash green Call on hold
Solid green On a call
Volume up button Increases the listening volume
Volume down
button
Decreases the listening volume
Mute button Solid red Headset is muted
NOTE Inline controls may vary for headsets connected to DA70/DA80 audio processors.
Overview
3

Power on your headset by connecting it to your computer.
Your headset connects in one of 2 ways:
• With USB connector
• With DA70/DA80 audio processor with Quick Disconnect (QD)
DA80
DA70
Download Poly Lens App to get the most out of your device. Some softphones require the
installation of Poly software to enable device call control (answer/end and mute)
functionality. Download: poly.com/software.
• Enable features
• Change settings
• Configure call control for softphones
• Update device firmware
• Manage notifications and alerts
• Schedule health and wellness reminders
NOTE Device settings and updates are also available in Plantronics Hub App.
Setup
Load software
4

Lengthen or shorten the band until it fits comfortably. The cushions should sit comfortably
over the center of your ears.
This headset can be worn on the left or right side.
Rotate the boom to align with your mouth.
CAUTION To avoid breaking the boom, only rotate it up and over 180°.
Gently bend the boom in or out so it is approximately two finger widths from the corner of
your mouth.
Fit
Adjust the headband
Position the boom
Adjust the boom
5

Headset call control is a software feature and dependent on a compatible softphone. If you
have not installed Poly Lens Desktop App (poly.com/software) or do not have a compatible
softphone, press the headset call button first and then make/take/end the call using the
softphone application.
Answer or end a call
Tap the Call button or use your softphone.
Make a call
Dial using your softphone application.
Hold
Press and hold the call button for 2 seconds to put a call on hold.
Listening volume
Press the Volume up (+) or Volume down (-) button.
Adjust headset microphone volume (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.
During an active call, tap the Mute button to mute or unmute your headset.
Basics
Make/take/end calls
Volume
Mute
6

Support
NEED MORE HELP?
poly.com/support
Manufacturer:
Plantronics, Inc. Plantronics B.V. Plantronics Ltd.
345 Encinal Street
Santa Cruz, CA 95060
United States
Scorpius 171
2132 LR Hoofddorp
Netherlands
Building 4, Foundation Park
Cannon Lane, Part 1st Floor
Maidenhead, SL6 3UD
United Kingdom
© 2022 Poly. All trademarks are the property of their respective owners. Manufactured
by Plantronics, Inc.
216045-06 01.22
7