Polycom RealPresence Medialign 55 Express Manual

1725-84246-001B
Polycom®RealPresence®MedialignTM 55 Express
SETUP SHEET
Polycom recommends installing a
cable tie through the power supply
bracket to provide strain relief for
cables routed through the lower
cable access opening.
Attach the codec and power
supply cables. Refer to the
Wiring Diagram on Page 4.
Attach the power supply and adapter bracket.
Attach the codec and codec bracket.Remove the rear cover.
1
b
2
c
345
a
Codec
Bracket Adapter
Bracket
Camera
Bracket
Wall
Mount
Brackets
Pleaseread through this Display User Guide for safety precautionsbefore installing this product
Display User Guide
RealPresence® Medialign™Express

Connect the power cord and power up the
system. Verify that the device boots up.
Cables not shown
for clarity.
Temporarily manage cables exiting
through the lower cable access in the
rear cover by tying them to the display
handles.
Attach the display adapter brackets to the
back of the display.
Attach the cable to the
camera and attach the
camera to the camera bracket.
Attach the camera assembly
to the display.
Power down and unplug the device
from mains. Attach the rear cover.
67
910 11
8
Camera
cable not
shown
for clarity.

Attach the wall mount bracket to the wall. Attach the display by hooking the
display brackets onto the wall mount
bracket on the wall.
Switch the system power ON.
Connect the power cable to the
system.
Display not shown
for clarity.
13
www.polycom.com/videodocumentation
Support
Product Documentation
Documentation du produit
Documentación del producto
Documentação do produto
Produktdokumentation
12
14
15
Configure the codec. Refer to the
Polycom®RealPresence®Group
Series Administrator Guide for
details.
16

© 2016, Polycom, Inc. All rights reserved. POLYCOM® and the names and marks associated with Polycom's products are trademarks and/or service
marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. All other trademarks are
property of their respective owners.
Wiring Diagram
Codec located inside the display
assembly / housing.
LAN
Mini HDCI
HDCI
LAN
HDMI In
C13 cable inside the
display assembly / housing.
Power outlet located on the wall
behind the display
Customer provided
network connection.
Through customer provided
cable path to table.
Enet
12Vdc
Mains Power
CLink
Ethernet
Power
HDCI
Legend
HDMI
CLink