Powerfix Profi PBT-TL022 Technical specifications

TELESCOPIC ALUMINIUM LADDER PBT-TL022
ALU-TELESKOPLEITER
Montage-, Bedienungs- und Sicherheitshinweise
TELESCOPIC ALUMINIUM LADDER
Assembly, operating and safety instructions
IAN 311926

GB/IE/NI Assembly, operating and safety instructions Page 5
DE/AT / CH Montage-, Bedienungs- und Sicherheitshinweise Seite 23
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.

A
B
C
2
3
1
4
5
6
7

H
D E
F G
8
10
2
6
9

5GB/IE/NI
Introduction ..................................................................................Page 6
General...........................................................................................Page 6
Delivery contents/product parts...................................................Page 6
Technical data ................................................................................Page 7
Symbols..........................................................................................Page 7
Safety..............................................................................................Page 10
Intended use ...................................................................................Page 10
Safety instructions...........................................................................Page 10
Initial use........................................................................................Page 14
Checking the ladder and scope of delivery .................................Page 14
Assembling the base ......................................................................Page 14
Using the ladder.............................................................................Page 15
Locking device................................................................................Page 16
Pulling out the ladder .....................................................................Page 17
Pulling the ladder out to its total length.........................................Page 17
Collapsing the ladder ....................................................................Page 17
Cleaning and maintenance.....................................................Page 18
Transport and storage....................................................................Page 19
Cause of accidents.........................................................................Page 19
Disposal..........................................................................................Page 20
Disposing of the packaging...........................................................Page 20
Disposing of the ladder..................................................................Page 21
Service address...........................................................................Page 21
Warranty .......................................................................................Page 21

6 GB/IE/NI
Telescopic Aluminium Ladder
Introduction
We congratulate you on the purchas e
of your new product. You have cho-
sen a high quality product. Familiar-
ise yourself with the product before
using it for the first time. In addition,
please carefully refer to the operat-
ing instructions and the safety advice
below. Only use the product as in-
structed and only for the indicated
field of application. Keep these in-
structions in a safe place. If you pass
the product on to anyone else, ple ase
ensure that you also pass on all the
documentation with it.
General
READ THE INSTRUCTIONS
FOR USE AND STORE THEM
IN A SAFE PLACE!
These instructions for use be-
long to this 3.35m aluminium
telescopic ladder (to be referred to
subsequently as the „ladder“). They
contain important information con-
cerning safety and use.
Read the instructions for use carefully,
particularly the safety instructions,
and understand them before using
the ladder. Failure to observe these
instructions for use can result in seri-
ous injuries or damage to the ladder.
These instructions for use are based
on standards and regulations appli-
cable within the European Union.
Also observe country-specific direc-
tives and laws abroad.
If you pass the ladder on to some-
one else, always include these in-
structions.
Delivery contents/
product parts
120 x Release buttons (locking
device)
2Base
32 x Slip-resistant caps (base)
4Strap
511 x Rungs
62 x Side rails
722 x Protective caps (rungs)
8Upper block formation (for lad-
der which has not been pulled
out to maximum length)
92 x Hexagonal bolt with nut
10 2 x Side rail elements with spacer

7GB/IE/NI
Technical data
Model: PBT-TL022
Maximum
permissible load: 150kg
Maximum length: 3.35m
Inclination angle: 65°–75°
Weight: 11.7 kg
Maximum
permissible
number of users: 1
Item number: IAN 311926
Symbols
The following symbols and signal
words are used in these instructions
for use, on the ladder and on the
packaging.
These symbols and signal words
denote a hazard with a medium
risk, which, if not prevented, can
result in death or a serious injury.
CAUTION!
These symbols and signal words
denote a hazard with a low risk,
which, if not prevented, can result
in a minor or moderate injury.
NOTE!
This signal word warns against
potential property damage.
TÜV Rheinland confirms that the
telescopic ladder complies with
the relevant requirements for a
safe product.
This symbol provides
you with useful addi-
tional information on
handling or use.
Read and under-
stand the instructions
for use before using
the ladder.
FRON T
BACK
Position the ladder
with the „back“ fac-
ing the wall and the
„front“ facing the
user.
65-75°
Please note the
required inclination
angle when setting
up the ladder. The
inclination angle/
installation angle of
the ladder must be
75° (ratio 1:4).

8 GB/IE/NI
max.
kg
150
Please note the maxi-
mum load of 150kg.
min.
1 m
Please note that the
ladder must extend
at least 1 m above
the installation point.
Always carry out a
visual inspection of
the ladder before
using the ladder.
Always check the
ladder feet before
using the ladder.
Secure the top and
bottom of the ladder.
max. 1
There may only be 1
person maximum on
the ladder at a time.
Ensure that there is
always only one per-
son using the ladder
at a time.
Avoid leaning too
far sideways.
Never step off the
ladder sideways.
OIL H
2
O
Ensure that there are
no contaminants on
the floor of the area
in which you set up
the ladder.
Always set up the
ladder on a solid
surface.
There may only be
one person on any
climbable branch of
the ladder at a time.
Warning, electrical
hazard! Be aware of
hazards posed by
power li nes during
transport of the lad-
der.
Do not use the ladder
as a bridging structure.
Always face the lad-
der when ascending
or descending.

9GB/IE/NI
Ensure while placing
the upper end of the
ladder that it is posi-
tioned correctly.
Do not use the lad-
der on an uneven or
loose surface.
UP
Observe the correct
installation direction
when using the ladd er.
The ladder may only
be used in combina-
tion with the stabiliser
on the feet (base).
Before using the lad-
der, all rungs which
have been pulled
out must be locked.
Rungs locked.
Rungs unlocked.
When pulling in the
ladder, your hands
must be placed on
the external posts
and may not at any
point during this pro-
cess be placed on
the rungs.
The two side rail ele-
ments 10 must both
in parallel either be
pulled out or pushed
in. You may not pull
out one of the two
s ide rail elements a nd
then use the ladder
in this state.
Warning, risk of
falling off ladder!
Improper use may
result in injury. You
can easily slip or fall
off the ladder and
injure yourself.

10 GB/IE/NI
Safety
Intended use
The ladder is
exclusively in-
tended for use
as a reaching assistance device with
a maximum load of 150kg. It is only
intended for private, non-commer-
cial use.
The ladder is intended exclusively for
use as a leaning ladder i.e. it must
be propped up at an inclination an-
gle of approx. 1:4 at the installation
point.
Only use the ladder as described
in these instructions for use. Any
other use is considered improper
use and may result in property
damage and/or personal injury.
The ladder is not a toy.
The manufacturer and retailer as-
sume no liability for damages due
to improper or incorrect use.
Safety instructions
RISK OF SERIOUS INJURY!
Improper use or improper handling
of the ladder can create risks which
may result in serious injuries or even
death.
Only use the ladder if
you are in good health.
Certain medical con-
ditions, medication and the mis-
use of drugs or alcohol can re-
sult in an increased risk to your
safety when using the ladder.
Ensure when transporting lad-
ders on roof racks or in trucks
that the ladders are attached/
f astened appropriately to prev ent
personal injuries or property
damage.
Examine the ladder
after it has been deliv-
ered and before first
use to ascertain the condition
and functionality of all parts.
Carry out a visual inspection of
the ladder for damage and safe
use at the beginning of every
work day on which the ladder
must be used.
Verify the ladder is suitable for
the respective use.
Do not use the ladder
if it is damaged.
Remove all contamination on the
ladder, such as wet paint, dirt, oil
or snow before using the ladder.

11GB/IE/NI
Before using the ladder for work
a risk evaluation with considera-
tion to the national regulations
of use must be carried out.
The ladder must be set up in the
correct set-up position, i.e. at the
correct installation angle for lean-
ing ladders (inclination angle
approx. 1:4).
Locking devices, when
applied, must be fully
secured before use.
A leaning ladder
should be leaned
against a level, solid
surface and be secured before
use i.e. by securing the leaning
ladder and by using a suitable
piece of equipment to secure its
stability.
The ladder must be
placed on a level,
horizontal, immovable
surface.
The ladder may never be brought
into a new position from above.
When the ladder is positioned
you must be aware of the risk of
a collision i.e. with pedestrians,
vehicles or doors. Lock all doors
and windows in the area around
the ladder where you are going
to work, but not emergency exits.
Check your
environment
for potential
hazards, i.e. high voltage
power lines or other exposed
electrical work equipment, be-
fore setting up the ladder and
getting onto it.
OIL H
2
O
Always set up the lad-
der on its feet and not
on the rungs or steps.
Do not set up the ladder on
slippery surfaces (i.e. ice, bare
surfaces or visibly contaminated
solid surfaces) if additional
measures which would prevent
the ladder slipping or ensure the
contaminated areas are suffi-
ciently clean are not taken.
max.
kg
150
Do not exceed the
ladder‘s load capac-
ity under any circum-
stan ces. The maximum load ca-
pacity of the ladder is 150 kg.
Do not lean too far
out when you are on
the ladder. You should
always stand steadily with both
feet on the same step, keeping
your body‘s core (navel) between
the side rails.
Under no circumstances should
you step off the ladder from a
great height without additional

12 GB/IE/NI
protection. Secure the ladder or
use a suitable piece of equipment
to guarantee its stability.
3
2
1
Do not use the top
three rungs of the lad-
der as a platform.
Caution: the top support beam
is not to be used as a rung. The
top support beam may likewise
not be used as a platform.
Only use the ladder for simple
and short work.
Do not use
the ladder for
work which
involves electric voltage. The lad-
der is made from a conductive
material. Do not use conductive
ladders when working under
electric voltage is unavoidable.
Do not use the ladder outdoors
in bad weather i.e. high winds
or a storm.
Prevent children from playing
with the ladder. Do not leave
a set up ladder unattended.
Keep children away from the
ladder.
Lock all doors and windows in
the area around the ladder w here
you are going to work, but not
emergency exits.
Always face the lad-
der when getting on
and off the ladder.
Hold onto the ladder
tightly when ascending
or descending. Hold
onto the ladder when working,
or take other safety measures if
this is not possible.
Do not use the ladder
as a bridging structure
or bridge.
Wear suitable, sturdy footwear
when you get on the ladder.
Avoid work on the lad-
der with a one-sided
load, such as lateral
drilling through solid materials
(i.e. brick or concrete).
Do not stay for too long on the
ladder without a regular break
(fatigue is a hazard). Get off the
ladder as soon as you feel tired.
min.
1 m
Leaning ladders for
accessing a greater
height should extend
at least 1m on from the installa-
tion point.
1 m
max.
2.21 m
Do not pro-
ceed further
than the last
meter of the leaning ladder.

13GB/IE/NI
KG
Only transport light,
manageable objects if
you are on the ladder.
Always hold on tight to the lad-
der with one hand while working,
or if this is not possible, establish
additional safeguards.
Ensure before use that
the locking devices of
the ladder function and
that all pulled out segments are
locked correctly before you get
up on the ladder. Only use the
ladder if it is functioning cor-
rectly.
Ensure that there are no cables
or pipes, unsecured windows
or doors or wall projections in
your vicinity before you get on
the ladder.
Do not use the ladder if one or
more slip-resistant caps for the
base are missing or are visibly
damaged.
Set up the ladder so that it is
accessible at all times.
Get up on the ladder rung by
rung. Do not skip multiple rungs.
Do not slide down the side rails.
If necessary, secure the ladder‘s
stability by taking additional
measures, i.e. by tying the ladder
to a solid anchoring.
If you wish to work at greater
heights you must secure the ladder
by taking additional measures.
Only transport the ladder when
it has been fully collapsed and
secured using the strap.
Do not move the ladder when
someone is on it.
Do not place any tools or objects
on the rungs and do not hang
anything from the ladder.
Do not pull too hard on objects
and do not exert any strong pres-
sure on objects when you are on
the ladder. The ladder could fall
over as a result.
Always wear tight-fitting clothing
when you get on the ladder.
Loose clothing can get trapped
and cause you to fall from the
ladder.
Do not extend the ladder in a
makeshift way and do not alter
its shape or function under any
circumstances.
The ladder may never be brough t
into a new position from above.
Pay attention to the wind when
using the ladder outdoors.

14 GB/IE/NI
Initial use
Checking the ladder
and scope of delivery
RISK OF INJURY! If you use
a damaged ladder or use the
ladder incorrectly there is a high
risk of injury.
Examine the ladder after it has
been delivered and before first
use to ascertain the condition
and functionality of all parts.
DANGER OF SUFFOCATION!
C hildren can get entangled in th e
packaging film whilst playing
and suffocate.
Do not allow children to play
with the packaging film.
NOTE!
RISK OF DAMAGE!
Opening the packaging carelessly
with a sharp knife or other sharp
objects may damage the ladder.
Be careful when opening
the packaging:
1. Remove the ladder from the
packaging.
2. Verify the scope of delivery is
complete (see Fig. A).
3. Check to see if the ladder or the
individual parts are visibly dam-
aged. Do not use the ladder if
you detect any type of damage.
Contact the manufacturer using
the service address stated on the
warranty card.
Assembling the base
CAUTION! RISK OF PER-
SONAL INJURY AND
PROPERTY DAMAGE!
The ladder can fall over while
the base is being assembled.
This can lead to personal injury
or property damage.
Ensure that the ladder does not
fall over while the base is being
assembled.
If necessary, ask another person
to help you assemble the produ ct.
1. Place the base 2with the non-
slip caps 3on the ground (see
Fig. H).
2. Put the side rails onto the base 6
in such a way that the mounting
holes of the side rails and the
base are aligned.
3. Insert the hexagonal bolt 9
through the mounting holes.

15GB/IE/NI
4. Fix the screws with the nuts
provided.
ATTENTION!
The following points are to
be examined before using
the telescopic ladder:
Check that the side rails/legs
(upright parts)/rungs / top sup-
port beam/base are not bent,
curved, distorted, dented,
cracked, corroded or decaying.
Check that the fixation points for
other parts on the side rails/legs
(upright parts)/rungs / top sup-
port beam/base are in good
condition.
Check that fastenings (usually
rivets, screws, bolts) are not
missing or loose or corroded.
Check that the side rails/legs
(upright parts)/rungs / top sup-
port beam/base are not missing
or loose, worn down, corroded
or damaged.
Check that the locking mecha-
nisms and locking indicators
function correctly and that the
rung elements lock correctly.
Check that no rubber feet are
missing or loose, worn down,
corroded or damaged.
Check that the ladder is free
from contamination (i.e. dirt,
paint, oil or grease).
Check if the locking indicators
are functioning and visible.
Check the brackets for cracks
and other defects such as bro-
ken parts.
Make sure that there is no rela-
tive movement between the sup-
port beams and the rungs/steps.
If any of the examinations described
above produces an unsatisfactory re-
sult you should NOT use the ladder!
Using the ladder
RISK OF SERIOUS INJURY!
If you use the ladder incorrectly,
you could injure yourself or other
people.
Only get onto the ladder if:
• you have set it up correctly in a
suitable location and according
to the instructions,
• are wearing sturdy
shoes,

16 GB/IE/NI
• have carefully read and under-
stood all the information in the
chapter “safety“.
Ensure before use that the lock-
ing devices of the ladder function
and that all pulled out segments
are locked correctly before you
get onto the ladder.
Do not leave children alone and
unattended with the set up ladd er.
Do not step on the top three
rungs of the ladder.
Do not move the ladder whilst
standing on it.
Ensure that the ladder is correctly
secured if you reposition it.
Only get on the ladder if you
have positioned it at the correct
angle of 75° (inclination angle
1:4).
CAUTION! CRUSHING
HAZARD!
If you do not exercise caution
when pulling out or collapsing
the ladder you could trap or
crush your fingers.
Exercise caution when pulling
out or collapsing the ladder.
Ensure that your fingers, hands
and arms are at the same height
as the release buttons which have
been pressed when collapsing
the ladder.
Locking device
The individual ladder segments are
locked when you pull out the ladder
by means of the locking devices on
the rungs 5.
Always check whether
all the pulled out segme nts
have been locked cor-
rectly before you get
onto the ladder:
• The locking device of a segment
has been locked when the red
section beside both release but-
tons 1of a rung is no longer
visible (see Fig. B).
If you exert pressure on any rung
it will not be pushed down.
• The locking device of a segment
has not been locked when the
red section beside one or both
of the release buttons 1of a
rung is visible (see Fig. C).
If you exert pressure on any
rung it will be pushed down.
Ensure when you are pulling
out the ladder from the top
downwards that the individual
sections are only locked when
you have pulled out the ladder
to its total length.

17GB/IE/NI
Pulling out the ladder
Pulling out the ladder by
a few rungs
If you do not pull out the
ladder to its total length,
the block formation of the
remaining rungs which have not been
pulled out must be located at the top
of the ladder.
1. Place the ladder on a firm and
level surface.
2. Stabilise the ladder by putting
a foot on the base 2.
3. Pull out the ladder rung by rung
from the bottom upwards until
you have achieved the desired
length (see Fig. D).
By means of the locking device,
each section is automatically
locked as soon as the respec-
tive rung 5has been pulled
out to its maximum length.
4. Ensure that every ladder seg-
ment is locked before you get
on the ladder (see the chapter
“Locking device“).
Pulling the ladder out
to its total length
1. Place the ladder on a firm and
level surface.
2. Stabilise the ladder by putting
a foot on the base 2.
3. Pull out both of the top side rail
elements with the spacer 10 . En-
sure that the side rail elements
are locked.
4. Pull out the ladder rung by rung
from the bottom upwards until
you have achieved the total
length (see Fig. E and F).
Ensure while doing so that the
locking devices of the ladder
are only locked when you have
pulled out the ladder to its total
length.
5. Ensure that every ladder seg-
ment is locked before you get
onto the ladder (see the chapter
“Locking device“).
Collapsing the ladder
If you press the bottom
release buttons (on the
second rung from below)
every rung of the above ladder
part will be automatically unlocked
and collapsed. If you begin with
one of the upper rungs, you will
only unlock the rungs above that
and the rungs below that must be
unlocked separately.

18 GB/IE/NI
1. Ensure that the ladder is placed
on a firm and level surface.
2. Ensure that your fingers, hands
and arms are at the same height
as the release buttons when col-
lapsing the ladder.
3. Press both of the release buttons
of a rung to the centre so that
the red section under it becomes
visible.
The locking device will unlock
and the rest of the ladder above
the rung will collapse.
Cleaning and maintenance
RISK OF INJURY!
If handled incorrectly
there is a risk of injury
if rungs or side rails
are contaminated. You could
easily slip, fall off the ladder
and injury yourself.
Keep the ladder clean. Remove
all contamination on the ladder,
such as dirt, old paint, etc. be-
fore collapsing the ladder.
Always wipe down the rungs.
Only allow repair and mainte-
nance work to be carried out
by experts.
If necessary, contact the manu-
facturer or distributor for repairs
or replacement of parts such as
feet, for example.
NOTE:
RISK OF DAMAGE!
Improper cleaning can
damage the ladder.
Do not use aggressive cleaning
agents, brushes with metal or
nylon bristles, or sharp or metal
cleaning tools such as knives,
rigid scrapers, etc. These can
damage the surface.
Keep the protective caps and
slip-resistant caps of the base
free from dirt, abrasive grit, etc.
These could damage the surface.
Clean the ladder with a brush
or cloth.
Dry the ladder thoroughly after
cleaning, particularly the rungs.
Do not carry out maintenance
or repair work on the ladder by
yourself under any circumstances.
Contact the manufacturer using
the service address stated on the
warranty card or a specialist
workshop. Unauthorised repairs
or improper handling will void
all warranty and liability claims.
Do not alter the design of the
ladder.

19GB/IE/NI
Transport and storage
Always store the ladder closed
and locked, in as straight a po-
sition as possible e.g. hung up
by the bars in a suspension sys-
tem or placed on a flat, clean
surface.
Only store the ladder in a loca-
tion where it cannot be dam-
aged by vehicles, heavy objects
or dirt.
Only store the ladder in a loca-
tion where it does not present a
tripping hazard or obstacle.
Only store the ladder in a se-
cure location where it not freely
accessible and therefore cannot
be used for criminal purposes.
In cases of long-term use and
the free access associated with
this (e.g. on scaffolding) always
secure the ladder against use
by unauthorized persons, so
that unauthorized persons (e.g.
children playing) can be im-
peded.
Collapse the ladder fully after
each use and secure it with the
help of the strap 4to prevent it
from accidentally pushing apart.
Store the ladder in a dry place.
Store the ladder out of the
reach of children.
Prevent children from playing
with the ladder unsupervised.
Protect the ladder from direct
sunlight during storage.
Store the ladder in a closed
and upright position.
Cause of accidents
The following is an incomplete list of
risks which describes typical hazards
and examples of common causes
of accidents when using ladders.
Take the following risks into consid-
eration as the basis for safe work
when handling the ladder to prevent
accidents.
a. Instability
1. Incorrect positioning of the lad der
(i.e. incorrect inclination angle of
leaning ladders or step ladders
not fully extended);
2. Slipping of the lower ladder end
outwards, i.e. from the wall on
which the ladder is leaning;
3. Lateral sliding of the ladder, falls
to the side and toppling of the
upper tread (i.e. by leaning too
far out or insufficient hold on
the stair);

20 GB/IE/NI
4. Poor ladder condition (missing
or damaged rubber caps on the
base);
5. Stepping off an unsecured
ladder at a height;
6. Unsuitable surface for the ladder
installation location (i.e. unstable,
soft ground, sloping ground,
slippery surfaces or contaminated
solid surfaces);
7. Bad weather (i.e. wind);
8. Collisions with a ladder, i.e. from
vehicles or doors;
9. Wrong ladder selected (i.e.
too short ladder, improper
application).
b. Improper handling
1. Propping up the ladder in the
working position;
2. Setting up and dismantling
the ladder;
3. Carrying objects when ascend-
ing the ladder.
c. Slipping, tripping and
falling
1. Unsuitable footwear;
2. Contaminated rungs;
3. Careless behaviour on the part of
the user (i.e. taking two steps at
once, sliding down the slide rails).
d. Ladder construction
malfunction
1. Poor ladder condition (i.e. dam-
aged side rails, wear);
2. The ladder has been overloaded.
e. Electrical hazards
1. Essential work involving electric
voltage (i.e. troubleshooting);
2. Setting up the ladder in the
direct vicinity of live electrical
work equipment (i.e. high volt-
age power lines);
3. Damage to electrical work equip-
ment by ladders (i.e. covers or
protective insulation);
4. Wrong ladder type for electrical
work.
Disposal
D isposing of the packaging
Dispose of the packaging
unmixed. Put cardboard and
carton in the waste paper
and put film in the recyclable
material collection.