Precor EFX 524I User manual

EFX® 524i
EFX® 534i
Product Owner's Manual
Elliptical Fitness Crosstrainer™

Product Owner’s Manual: Important Safety Instructions 1
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
When using the self-powered EFX®, always take basic
precautions, including the following:
• Read all instructions before using the EFX. These instructions
are written to protect the unit and ensure the safety of those
using the EFX.
• Before beginning any fitness program, make sure all users see
a physician for a complete physical examination.
Il est conseillé de subir un examen médical complet avant
d’entreprendre tout programme d’exercise. Si vous avez des
étourdissements ou des faiblesses, arrêtez les exercices
immédiatement.
To reduce the risk of electrical shock always
unplug the optional power adapter before
cleaning the unit.
To reduce the risk of burns, fire, electric shock,
or injury, take the following precautions:
• Do not allow children or those unfamiliar with its operation on or
near the EFX. Do not leave children unsupervised around the
unit.
• Never leave the EFX unattended with the optional power
adapter plugged in. Remove the optional power adapter before
cleaning the EFX, and before putting on or taking off parts.
• Assemble and operate the EFX on a solid, level surface. Locate
the EFX a few feet from walls or furniture.
• Maintain the EFX in good working condition. Refer to the
Maintenance section. Make sure that all fasteners are secure.
• If you plan to move the unit, obtain help and use a hand truck.
Do not grasp any plastic parts while lifting or moving the unit.
The plastic parts are not structurally linked to the unit and will
break.
• Use the EFX only for its intended purpose as described in this
manual. Do not use accessory attachments that are not
recommended by the manufacturer, as such attachments may
cause injuries.
• Never operate the unit if it is damaged, not working properly,
when it has been dropped, or has been dropped in water. Refer
to Obtaining Service.
• Keep the optional power adapter and power cord away from
heated surfaces.
• Do not operate the EFX where aerosol (spray) products are
being used or where oxygen is being administered.
• Do not use outdoors.
• Do not attempt to service the EFX yourself except to follow the
maintenance instructions found in this manual.
• Never drop or insert objects into any opening. Keep hands
away from moving parts.
• Do not set anything on the handrails, display console, or covers.
Place liquids, magazines, and books in the appropriate
receptacles.
DAN
G
ER
WARNIN
G

Product Owner’s Manual: Important Safety Instructions 2
IMPORTANT SAFETY INSTRUCTIONS
Educating Users
Take time to educate users on the safety issues found in the
Important Safety Instructions. These instructions appear in both
the User’s Reference Manual and the Product Owner’s Manual.
Safety Approval
When identified with the ETL-c logo, the unit has been tested and
conforms to the requirements of CAN/CSA-E-335-1/3-04, EN
60335-1:2002 Safety of Household and Similar Electrical
Appliances. The unit is a Class S/B or C certified machine
according to applicable EN957 standards.
Hazardous Materials and Proper
Disposal
The self-powered EFX has an internal battery which contains
materials that are considered hazardous to the environment.
Proper disposal of the battery is required by federal law.
If you plan to dispose of your unit, contact Precor Commercial
Products Customer Support for information regarding battery
removal. Refer to Obtaining Service.

Product Owner’s Manual: Important Safety Instructions 3
IMPORTANT SAFETY INSTRUCTIONS
Radio Frequency Interference (RFI)
Federal Communications Commission, Part 15
The EFX has been tested and found to comply with
• the IEC EMC Directive (international electromagnetic
compatibility certification)
• the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. The EFX generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the owner’s manual instructions, may cause harmful
interference to radio communications.
Per FCC rules, changes or modifications not
expressly approved by Precor could void the
user’s authority to operate the equipment.
Canadian Department of Communications
This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n’émet pas de bruits
radioéélectriques dépassant les limites applicables aux appareils
numériques de la class A prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministére des
Communications du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
This product conforms to the requirements of the European
Council Directive 89/336/EEC, Electromagnetic Compatibility
and has been tested to the following standards:
EN55022, Limits & methods of Measurement of Radio
Interference, Information Technology Equipment.
EN50082-1, Generic Immunity Standard for Residential,
Commercial and Light Industrial Products.
This product is compliant to 2002/95/EC Restriction of
Hazardous Substances Directive.
This product also conforms to the requirements of the European
Council Directive 73/23/EEC, Low Voltage Directive and has
been tested to the following standard:
IEC 335-1, Safety of Household and similar Electrical
Appliances.
WARNIN
G

Product Owner’s Manual: Important Safety Instructions 4
Obtaining Service
You should not attempt to service the EFX except for the
maintenance tasks described in this manual. For information about
product operation or service, see the Precor web site at
www.precor.com. Should you need more information regarding
customer support numbers or a list of Precor authorized service
centers, visit the Precor web site at www.precor.com/corp/contact.
For future reference, write the model, serial number, and date of
purchase for all your units in the space provided. The serial number
is printed on a label located on the rear cover (Diagram 1).
Diagram 1: Location of serial number
Model #: _______ Serial #: _______________________
Date purchased: _________________________
Model #: _______ Serial #: _______________________
Date purchased: _________________________
Model #: _______ Serial #: _______________________
Date purchased: _________________________
Model #: _______ Serial #: _______________________
Date purchased: _________________________
Serial number label

Product Owner’s Manual: Table of Contents 5
Table of Contents
Important Safety Instructions ...............................................1
Educating Users .................................................................................. 2
Safety Approval .................................................................................... 2
Hazardous Materials and Proper Disposal .................................... 2
Radio Frequency Interference (RFI) ................................................ 3
European Applications ....................................................................... 3
Obtaining Service ................................................................................ 4
Self-Powered Features ...........................................................6
Informational Displays Prior to Shutdown ...................................... 6
Symptoms of a Low Battery .............................................................. 7
Using the Optional Power Adapter ................................................. 7
Replacing the Battery ......................................................................... 7
Club Features ............................................................................8
Club Programming Tips ..................................................................... 8
Choosing a Language ........................................................................ 9
Selecting a U.S. Standard or Metric Display ................................ 9
Setting an Exercise Session Time .................................................10
Setting a Pause Time Limit .............................................................10
Setting a Cool-Down Time Limit ....................................................11
Informational Displays ......................................................................11
User ID Entry with CSAFE Equipment .........................................14
Maintenance ............................................................................ 15
Daily Inspection ..................................................................................15
Daily Cleaning ....................................................................................15
Long-Term Storage ...........................................................................16
Troubleshooting Error Codes .........................................................16
Troubleshooting Heart Rate ............................................................16
Precor Commercial Equipment Limited Warranty ........ 17

Product Owner’s Manual: Self-Powered Features 6
Self-Powered Features
The power source for the EFX is the user. When a person pedals
above 40 strides per minute (spm), the power that is generated
allows the EFX to function properly.
Informational displays appear when the battery is low or when the
user has stopped pedaling during a workout. The display explains
what to do to retain power. If the messages are ignored, the EFX
begins shutdown procedures to maintain the charge of the battery.
Refer to Informational Displays Prior to Shutdown.
An optional power adapter can be purchased and provides
sustained power to the EFX. If you plan to customize your unit, the
power adapter is highly recommended. To purchase the optional
power adapter, check with your dealer. Refer to Obtaining Service.
Informational Displays Prior to
Shutdown
The EFX saves its battery charge by moving into a shutdown mode.
Whenever PEDAL FASTER appears on the display, the heart rate,
SmartRate®and program indicators turn off. If the user does not
maintain a stride rate of 40 spm, then a 30-second shutdown
process begins.
PEDAL FASTER appears on the display followed by a set of dots
indicating that the EFX is shutting down. If no pedaling is detected,
the EFX eventually shuts off.
Note: The user can resume exercising if he or she begins pedaling
before the 30-second period elapses.
Note: If the EFX is connected to a CSAFE master device, a slightly
different scenario occurs. When ten seconds remain before the EFX
shuts off, the workout session ends. RESETTING appears in the
lower display while the EFX disconnects from the CSAFE master
device. All key presses are ignored. Pedaling has no effect on the
display.

Product Owner’s Manual: Self-Powered Features 7
Symptoms of a Low Battery
If no one has used the EFX for an extended period of time, the
battery may need recharging.
Symptoms of a low battery include:
• A flickering or erratic display
• No workout statistics appear or accumulate
A sustained exercise session may help recharge the battery. Or, you
can connect the optional power adapter to maintain a constant
power source.
Using the Optional Power Adapter
Diagram 2 shows the receptacle for the optional power adapter.
After connecting the power adapter to the EFX, plug the opposite
end into the appropriate power source (110/120v or 220/240v) for
your unit.
CAUTION: When the optional power adapter is in use, ensure
that the power supply cord does not create a safety hazard.
Keep it out of the way of traffic and moving parts. If the power
supply cord or power conversion module is damaged, it must be
replaced.
Diagram 2: Optional power adapter
The display functions differently when the power adapter is
connected. Because the power adapter provides a constant source
of power, the user can stop pedaling during a workout and pause for
brief periods without the EFX initiating shutdown procedures. When
the pause time limit expires and the user has not resumed pedaling,
the display returns to the Precor banner. Refer to Setting a Pause
Time Limit.
Replacing the Battery
The EFX battery is built to last for a long time. However, if you feel
that the battery may need replacing, check with an authorized
service technician. Refer to Obtaining Service.
CAUTION: The battery stored inside the EFX contains
hazardous materials and must be disposed of according to
Hazardous Waste Regulations. Refer to Hazardous Materials
and Proper Disposal.

Product Owner’s Manual: Club Features 8
Club Features
These next few pages provide information that lets you customize
the EFX for your club or facility. All these features remain hidden to
the facility’s patrons and can only be accessed using special key
presses. Read this section if you want to:
• Change the display to a different language
• Change the display to U.S. standard or metric
• Set the maximum workout and pause times
• Set a cool-down time limit
• View the odometer
• Display the number of hours the EFX has been in use
• View the software versions and part numbers
• Check the error log
• Display the serial number
• Connect to CSAFE equipment
Club Programming Tips
• Always start at the Precor banner.
• Electrical power must be supplied. A minimum stride rate (40
strides per minute) must be maintained while programming the
EFX. A constant power source is available if you use the optional
power adapter. If you plan to program the EFX, purchasing the
optional power adapter is highly recommended.
Note: If you do not use the optional power adapter and the
pedaling speed falls below 40 spm, no warning is given when
the EFX moves into its 30-second shutdown procedure.
• The club programming mode is accessed by pressing the
RESET key at the Precor banner. The remaining key presses
must occur quickly and without pause.
• The function of the QUICKSTART key is disabled while in club
programming mode.
• The club programs appear sequentially. Pressing the ENTER key
saves the changes you make and moves you through the
programs. The SELECT key displays the name of the data field
you are viewing or toggles between the available selections. To
exit a program without saving any changes, press the RESET
key.

Product Owner’s Manual: Club Features 9
Choosing a Language
The EFX can display user prompts, text, and user entries in seven
different languages. When the EFX is shipped from the factory, it is
set to display English. To change this setting, perform the following
steps:
1. At the Precor banner, press the following keys in sequence and
without pause:
RESET, QUICKSTART, ENTER, SELECT [7], CROSSRAMP ▲
As shown in Diagram 3, numbers are associated with the
keypad. The numbers 5, 6, 7, 1 appear on the display as you
press the associated key.
Note: No CROSSRAMP keys exist on the EFX534i. Use the
RESISTANCE ▲key [1] on the left side of the keypad.
SELECT LANGUAGE appears in the display. Use the arrow
keys to choose between ENGLISH, DEUTSCH, ESPANOL,
FRANCAIS, NEDERLANDS, PORTUGUES, and RUCCKIJJ.
Note: Programming prompts are not affected by language
selection. The prompts in this section continue to appear in
English.
2. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
Diagram 3: Keypad programming numbers
Selecting a U.S. Standard or Metric Display
The EFX can display measurements in either metric or U.S. standard.
The default factory setting is set to display U.S. standard. To change
this setting, perform the following steps:
3. At the SELECT UNITS prompt, use an arrow key to select a unit
of measure (U.S. STD or METRIC).
4. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
EFX524i
EFX534i
1
45
37
6
89
2
1
45
37
6
89
2

Product Owner’s Manual: Club Features 10
Setting an Exercise Session Time
You can limit how long a user can exercise on the EFX. For example,
if you set the time limit to 20 minutes, users can only enter a workout
time between 1 and 20 minutes.
Note: The automatic cool-down period is appended to the end of
any time-based program, so adjust the time limit accordingly.
You can also let a user exercise indefinitely by selecting the NO
LIMIT option. However, you will need to instruct users on how to
access this option. When a user begins an exercise session, he or
she must use the arrow keys to display INFINITE at the workout time
prompt, and then press ENTER.
5. At the SET MAX WORKOUT TIME prompt, use the arrow keys
to display the available time limits. Choose between 1 and 240
minutes. Or, choose NO LIMIT.
Note: When you press and hold an arrow key, the selections
increment by five, for example, 5, 10, 15, and 20. When you tap
an arrow key, the selections increment by one.
6. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.
Setting a Pause Time Limit
You can limit how long a user can pause while exercising on the EFX
by entering a time between 1 and 120 seconds (two minutes). For
example, if you set the pause time limit to 60 seconds, the display
automatically resets to the Precor banner if no pedaling occurs for
one minute.
Important: The optional power adapter must be connected to
establish a definitive pause time limit. If the optional power adapter
is not attached and the stride rate drops below 40 strides per
minute, the EFX begins its 30-second shutdown effectively
eliminating pause mode.
7. At the SET MAX PAUSE TIME prompt, use the arrow keys to
cycle through the available time limits. Choose between 1 and
120 seconds (two minutes).
8. When you are ready, press ENTER to move to the next program
or press RESET to return to the Precor banner.

Product Owner’s Manual: Club Features 11
Setting a Cool-Down Time Limit
You can limit how long a user cools down after exercising on the
EFX by entering a time between 0 and 5 minutes.
Important: It is recommended that you set the cool-down period at
or above three minutes. It takes time for a user’s heart rate to return
to a resting state after vigorous exercise. An effective cool-down
period also reduces the amount of lactic acid in muscle tissue.
9. At the SET COOL DOWN TIME prompt, use an arrow key to
cycle through the available time limits. Choose between 0 and 5
minutes. The default setting is 5 minutes.
10.When you are ready, press ENTER to save your changes and
return to the Precor banner. If you prefer to exit the program
without saving your changes, press RESET.
Informational Displays
The EFX provides information about its use (odometer and hour
meter), as well as software version, error log, and serial number. In
general, you would only access this information if directed to do so
by Precor Customer Support.
These instructions guide you through all the informational displays.
Pressing the ENTER key moves you through the displays. To exit,
press the RESET key at any time.
Viewing the Odometer
1. At the Precor banner, press the following keys in sequence and
without pause:
RESET, ENTER, QUICKSTART
The numbers 6, 5 appear on the display as you press the
associated key.
The odometer value (the number of cumulative strides users have
taken) appears on the display.
2. Press either SELECT key, and STRIDES appears briefly. When
the key is released, the odometer value reappears.
3. When you are ready, press ENTER to move to the next display
(hour meter).

Product Owner’s Manual: Club Features 12
Viewing the Hour Meter
HOUR METER appears followed by the number of hours that
the unit has been in use. The EFX tracks the elapsed minutes,
but the value that appears is truncated to the nearest full hour.
4. Press either SELECT key, and HOURS appears briefly. When
the key is released, the numeric value reappears.
5. When you are ready, press ENTER to move to the next display
(software version).
Viewing the Software Version and Part Numbers
SW VERSION appears for two seconds followed by the upper
board application software part number and version (for example,
48181-350).
6. To see the upper boot and lower software version, use a
SELECT key. If needed, you can move through all three—upper
application, upper boot, and lower application—by pressing a
SELECT key.
7. Write the numbers below. You will need these numbers when you
call Customer Support with display-related questions. This
information will help rule out any software-related problems:
Upper Application P/N & VER: ___________________
Upper Boot P/N & VER: _____________
Lower Application P/N & VER: ___________________
8. When you are ready, press ENTER to move to the next display
(error log).
Viewing the Error Log
ERROR LOG appears on the display followed by the first entry
in the error log if there are any errors. Up to ten error codes can
be retrieved.
If there are no errors in the log, you will see three dashes (— — —)
displayed.
9. To view any additional error codes in the error log, use the arrow
keys. The following Table 1 describes key functionality within the
error log.
Table 1. Keys used in viewing error log entries
10.Copy the error code information to paper so you can provide it to
Customer Support if needed. Be sure to copy it exactly as
shown.
Key Description
▼Displays the most recent error log entries
▲Reveals earlier log entries
SELECT Toggles between the error log, the odometer reading
and the hour meter values at the time the error
occurred; a title (i.e., STRIDES or HOURS) appears
briefly followed by the actual numeric value associated
with the error log.

Product Owner’s Manual: Club Features 13
11.When you no longer need the information in the error log, press
QUICKSTART for at least four seconds to delete the error log.
Continue to maintain light pressure on the key as the prompt
CLEAR? appears. Once the prompt OK is displayed, you can
release the key.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the EFX before clearing the error log.
When the error log is cleared, 1: — — — appears in the display
indicating that the error messages have been deleted.
12.When you are ready, press ENTER to move to the next display
(serial number).
Displaying the Serial Number
SER NUM appears on the display. The serial number is helpful
when you contact Customer Support.
Note: If no serial number appears, use the serial number found
on a label on the rear cover (Diagram 1).
13.If you have not already done so, write the serial number onto the
Warranty Registration card. You can also register online at
www.precor.com.
14.When you are ready, press ENTER to return to the Precor
banner.

Product Owner’s Manual: Club Features 14
User ID Entry with CSAFE Equipment
The EFX is fully compatible with CSAFE protocols. When the unit is
connected to a CSAFE master device and the user maintains a
stride rate above 40 strides per minute (spm), the user is prompted
for a user ID.
Note: If the optional power adapter is being used, then no pedaling
is necessary for user ID entry.
A message appears on the display and indicates when the user ID is
accepted by the CSAFE master device. Then, the program prompt
appears. The user has the option to choose QUICKSTART or select
a program and begin exercising.
If the user’s stride rate drops below 40 spm while using the CSAFE
device connection, a prompt PEDAL FASTER appears. If the stride
rate remains below the 40 spm threshold for the next twenty
seconds, the CSAFE connection is terminated. The word
RESETTING may appear on the display while the EFX disconnects
from the CSAFE device.
To review information about CSAFE specifications, visit the web site
at: www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining
Service.

Product Owner’s Manual: Maintenance 15
Maintenance
It is important to perform the minor maintenance tasks described in
this section. Failure to maintain the EFX as described here could
void the Precor Limited Warranty.
To reduce the risk of electrical shock, always
unplug the unit from its optional power adapter
before cleaning it or performing any
maintenance tasks.
Daily Inspection
Look and listen for slipping belts, loose fasteners, unusual noises,
and any other indications that the equipment may be in need of
service. If you notice any of these, obtain service.
Important: If you determine that the EFX needs service, move it
away from the usual exercising area. Place an OUT OF SERVICE
sign on it and make sure all patrons know that they must not use
the EFX.
To order parts or to contact a Precor authorized service provider in
your area, refer to Obtaining Service.
Daily Cleaning
Precor recommends the EFX be cleaned before and after each
exercise session. Use mild soap and water to dampen a clean, soft
cloth and wipe all exposed surfaces.
Frequently vacuum the floor underneath the unit to prevent the
accumulation of dust and dirt, which can affect the smooth operation
of the unit. Clean the grooves on the foot pedals using a soft nylon
scrub brush.
CAUTION: Do not use any acidic cleaners. Doing so will weaken
the paint or powder coatings and void the Precor Limited
Warranty. Never pour water or spray liquids on any part of the
EFX. Allow the EFX to dry completely before using.
Table 2. Cleaning the Ramp
Whenever the ramp becomes soiled, clean the exposed surfaces of
the ramp and roller wheels by taking the following steps.
1. Moisten a clean, soft cloth in a mild solution of soap and water.
2. Position one foot pedal at the top of the ramp (the other will
automatically be positioned at the bottom).
3. Clean the exposed portions of the ramp.
4. Gently lift the roller wheels and rotate them while wiping them
with the clean, soft cloth.
5. Switch the foot pedal position and finish cleaning the ramp.
DAN
G
ER

Product Owner’s Manual: Maintenance 16
Long-Term Storage
When the EFX is not in use for any length of time, ensure that the
optional power adapter is unplugged from its power source and is
positioned so that it and the power cord will not become damaged
or interfere with people or other equipment.
Troubleshooting Error Codes
If any error codes appear in the display, call an authorized service
person for assistance. Refer to Obtaining Service.
Troubleshooting Heart Rate
Table 3 may help you understand and troubleshoot erratic heart rate
readings.
Important: A heart rate can only be detected when the Precor heart
rate receiver is properly installed in the display and the user
maintains a minimum 40 spm. A user must also wear the chest
strap or grasp both touch-sensitive handrail grips.
Table 3. Erratic heart rate readings
Note: To conduct electrical impulses from a user’s heart, both
touch-sensitive handrail grips must be grasped firmly for five to ten
seconds. Usually, the concentration of salts in a person’s
perspiration provides enough conductivity to transmit a signal to the
receiver in the display console. However, because of body chemistry
or erratic heartbeats, some people cannot use the touch-sensitive
heart rate feature. A chest strap may provide better results.
What appears
on the display Cause What to Do
NO HR
RCVR
The heart rate
receiver is not
installed or it
has been
disconnected.
To reinstall the heart rate receiver,
contact Customer Support. Refer to
Obtaining Service.
— — — A heart rate is
not detected.
Face the display and keep your upper
body movement to a minimum. Wear a
chest strap or grasp both touch-
sensitive handrail grips. Allow at least 15
seconds for your heart rate signal to be
transmitted to the display. If the dashes
continue to appear, check the cable
connections.
Pulsing HR A signal is
being detected,
but the
transmission
requires more
time to
establish a
heart rate.
Be sure the chest strap is moist,
centered, and in direct contact with your
skin. If using the touch-sensitive handrail
grips, continue holding the grips with
both hands and make sure your hands
are moist, not dry.

EFX524i/EFX534i POM 49518-101, en
Warranty # 36287-112, en
Registration Card# 45622-101, en
15 October 2006
Precor, C, CrossRamp, EFX, M, Move Beyond, and SmartRate are registered trademarks of Precor Incorporated.
Crosstrainer, QuickStart, and StretchTrainer are trademarks of Precor Incorporated.
Copyright 2006 Precor Incorporated.
Specifications subject to change without notice.
www.precor.com
NOTICE:
Precor is widely recognized for its innovative, award winning designs of exercise equipment. Precor aggressively
seeks U.S. and foreign patents for both the mechanical construction and the visual aspects of its product design.
Any party contemplating the use of Precor’s product designs is hereby forewarned that Precor considers the
unauthorized appropriation of its proprietary rights to be a very serious matter. Precor will vigorously pursue all
unauthorized appropriation of its proprietary rights.
Precor Incorporated
20031 142nd Ave NE
P. O. B o x 72 02
Woodinville, WA USA 98072-4002
1-800-347-4404
EFX®524i and 534i Elliptical Fitness Crosstrainers
Product Specifications
Product Features
Programs
EFX524i EFX534i
Length 80 in (203 cm) 80 in (203 cm)
Width 32 in (81 cm) 32 in (81 cm)
Height 64 in (162 cm) 64 in (162 cm)
Weight 207 lb (94 kg) 207 lb (94 kg)
Shipping weight 255 lb (116 kg) 255 lb (116 kg)
Power Self-powered Self-powered
CrossRamp®13° - 40° 20° (Fixed)
Incline settings 1–20 Stationary
Resistance levels 1–20 1–20
Frame Powder-coated steel Powder-coated steel
Regulatory Approvals FCC, ETL, CE FCC, ETL, CE
CSAFE Compatible ✓
Heart Rate Telemetry ✓
QuickStartTM ✓
SmartRate®✓
Touch Heart Rate ✓
EFX524i EFX534i
Manual ✓✓
Crosstraining ✓✓
Gluteal ✓
Hill Climb ✓
Interval ✓✓
Weight Loss ✓✓
Display Readouts
* Use of a chest strap or the touch-sensitive
handrail grips is required.
EFX524i EFX534i
Calories ✓✓
Calories Per Minute ✓✓
Heart Rate* ✓✓
Heart Rate Analysis ✓✓
CrossRamp 1–20 Fixed
METS ✓✓
Profile ✓✓
Resistance Levels 1–20 1–20
SmartRate* ✓✓
Strides ✓✓
Strides Per Minute ✓✓
Time ✓✓
Watts ✓✓
Workout Summary ✓✓