Premier Mounts ECM-MAC2 User manual

INSTALLATION INSTRUCTIONS
Mac mini™ Mounting Bracket
Model: ECM-MAC2
9533-007-084-00
ECM-MAC2 (Qty 1)
M6 x 12 Phillips
Head Screw (Qty 4)
ECM-3763S Installation
1) Remove the mounting bracket from the packaging.
2) Align the adjustable mounting slots of the ECM-
MAC2 with the xed mounting holes on the ECM-
3763S.
3) Insert four (4) M6 x 12mm Phillips screws and tighten
using a screwdriver.
The ECM-3763S has six (6) mounting points. Either
the upper two or the bottom two rows must be
used depending on where the ECM-MAC2 is to be
mounted.
Go to Placing the Mac mini™ on page 2.
ECM-3763S
Center
Mounting Point
ECM-MAC2
M6 x 12mm
Phillips Screw
Adjustable
Mounting Slot
Screwdriver
ECM-MAC2
Center
Mounting Points
Upper Mounting
Points
Lower Mounting
Points
ECM-MAC2
ECM-3763S
Parts List
CREATING POSITIVE CUSTOMER EXPERIENCES
Page 1 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
• If you are using an ECM-3763S mount, continue below.
• If you are using an ECM-3763D, ECM-3763T or ECM-3763Q mount, go to page 2.

EUROPE
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: [phone]
Fax: [phone]
ECM-MAC2
Page 2 Visit the Premier Mounts website at http://www.mounts.com Installation Instructions
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: [phone]
Fax: [phone]
Other Locations
Phone: [phone]
Fax: [phone]
Mac mini™
ECM-MAC2
ECM-3763S
(Shown for illustration
purposes only.)
1) Place the Mac mini™ in the ECM-MAC2.
2) Route all cables at this time.
Please refer to the instructions that came packaged
with the Mac mini™ for further assistance.
ECM-3763D, ECM-3763T and ECM-3763Q Installation
1) Locate the two (2) bottom mounting points on the
back of the ECM Series mount.
2) Align the two xed mounting holes on the ECM-
MAC2 with the mounting points on the back of the
ECM Series mount.
3) Insert and tighten two (2) M6 x 12mm screws.
Go to Placing the Mac mini™ below.
Two (2) xed mounting holes will be used on the
ECM-MAC2 mounting bracket.
The ECM-3763D, ECM-3763T and ECM-3763Q will
use the two (2) lowest mounting points on the ECM.
Screwdriver
Fixed Mounting Hole
M6 x 12mm
Screw
ECM Series
Mount
• All trademarks are the property of the respective trademark owners.
Placing the Mac mini™