DREAMS Calder Bed Frame User manual

Two person
assembly
1 hour approx
assembly time
Calder Bed Frame
Assembly Instructions

Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best
ever night's sleep. Before you begin building your bed, please take a moment to read through the
instructions and make sure that you've got all the relevant parts listed on the following pages.
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Assembly tips
We recommend that you build your new bed in the room you’d like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.
Top tip
It’s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
kept away from children and animals to prevent any risk of suffocation.
To keep your little ones busy, there is a colouring page inside the back cover.
Safety and care
At Dreams, it’s our mission to give the whole nation a great night’s sleep –
this means that the quality of our products is of utmost importance to us. If
there are any issues with your product or any missing parts, please visit our
website at www.dreams.co.uk/help
Help and support
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible.
Please keep your assembly instructions safe to refer back to in the future.
Recycling
Assembly Guide - Page 2
Calder Bed Double -

Parts
Please identify which base you have purchased with your bed frame as the assembly method may
change. Once you have identified you have all of the relevant parts and fittings, please follow the
instructions for your chosen base below;
Bed assembly Page (Pay 5)
Solid slats Page (Page 6)
Sprung slats Page (Page 7)
Important Information
Parts list
A. HEADBOARD QTY 1
B. FOOTBOARD QTY 1
C. SIDE RAILS QTY 2
D. SUPPORT LEG QTY 1
Assembly Guide - Page 3
Calder Bed Double -

Fittings
Please check you have all the parts listed below with your product:
H1: JCN x 45mm
Qty: x6
H2: Metal Washer
Qty: x6
H3: Allen Key
Qty: x2
H4: JCN NUT
M6 x 15mm
Qty: x6
H5: M4 x 35mm
Qty: x1
mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
Tools required
Please check you have all these below:
Cross head
screwdriver
Assembly Guide - Page 4
Calder Bed Double -

Bed assembly
Use bolt (mounted on the HEADBOARD
and FOOTBOARD)
to fix the SIDE RAILS (C) onto
HEADBOARD (A) and FOOTBOARD (B) by
using Allen Key (H3).
Use Pack “1&2”
1
Assembly Guide - Page 5
Calder Bed Double -

Solid slat assembly
Carefully locate the slats onto the unit,
as step 2 : Use Bolt (H1), Washer (H2)
and Nut JCN (H4) to fix the unit using
Allen Key (H3).
Use Pack “1&2”
2
Fit the adjustable Support Leg (D) to
the centre slat. Secure with screw (H5)
using Crosshead Screwdriver (not
provided).
3
Assembly Guide - Page 6
Calder Bed Double -

Sprung slat assembly
Use the bolt to fix Support Leg onto the-
slat frame. Please note that these bolts are
to be found inside the slat frame box.
Carefully locate the slat onto the unit.-
Use bol- t (H1), Washer (H2) and Nut JCN (H4) to fix the
to fix the unit using Allen Key (H3).
Use Pack “1&2 & Sprung Slat”
1
H1
H3
H2
H4
H3
Assembly Guide - Page 7
Calder Bed Double -

Care and maintenance
Here are some tips to keep your new bed in tip
-
top condition
To clean your new bed, we'd advise using a warm damp cloth
-
please do not
use abrasive chemicals or bleach as this may damage the product.
Cleaning
Periodically we recommend you check that the screws or fixtures haven't been
become loose, over time. To move your new bed, we recommend lifting it where
possible, as dragging or pushing it could cause damage to your flooring.
Checking and moving
Please note each of our wooden pieces are unique, meaning that markings and
shade can vary slightly between beds. Over a period of time, the wood might
lighten or fade slightly due to light exposure.
Wood
Metal tends to be more resilient to everyday wear and tear. We recommend to
gently dust your metal furniture and keep it dry to maintain its look.
Metal
Thank you for shopping with us
-
we hope you have
a great night's sleep
-
Assembly Guide
-
Page 8
Calder Bed Double

Little dreamers
Keep the little ones entertained while
you assemble your new purchase.