Prime Design CBR-0010 User manual

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
Toll Free: 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
2
2
1
CBR-0010 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS
CONTENTS OVERVIEW
1—Mounting Brackets........................................... (Qty 2)
Note: This modular Crossbar kit can be installed
as a retrot conversion or new install.
For the retrot conversion from a completed two
Crossbar rack to a three Crossbar rack: perform
Steps 1.1 to 2.2 to prepare rack for the addition
of the third Crossbar.
Ladder rack shown in this manual is for
illustrative purposes only.
2—Crossbar............................................................ (Qty 1)
57.00”

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
2
1
Left Rear
Figure A 36.00”–60.00”
CROSSBAR RETROFIT SEQUENCE
CBR-0010 ASSEMBLY INSTRUCTIONS–CENTER CROSSBAR
NOTE: Crossbars and the Base Mounting
System are shown for illustrative purposes
only. The instructions contained in this
Manual will apply across many model
combinations and variations.
Loosen
Nuts
1.2
FRONT MOUNTING BRACKETS
1.1 Remove and retain Channel End
Caps and screws for Step 2.2
2.1
Loosen bolts
Slide front Mounting
Brackets and adjust
as shown in Figure A.
2.2
Place the new Mounting
Brackets under the Front
Crossbar as shown then
reinstall the End Caps.
CENTER CROSSBAR

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
Even Even
Figure B
CBR-0010 ASSEMBLY INSTRUCTIONS–CENTER CROSSBAR
USAM-CBR0010US01 Rev-A 0618
2.4 Place the Center Crossbar onto the Mounting Brackets, then
position as shown in Figure B.
Torque to
120 in-lbs
2.3
Loosen bolts
Torque to 120 in-lbs
2.5