Prime Design ACC-8000 User manual

UNIVERSAL RATCHET STRAP
PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
Toll Free: 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
2
ACC-8000 PACKAGING CONTENTS
CONTENTS OVERVIEW
ACC-8000 Ratchet Strap Assembly, Universal
Note: Rack models are shown in this
Manual for illustrative purposes only,
and are not included with this Ratchet
Strap assembly.
M8 x 20MM (2X)
M8 x 20MM (2X)
M8 x 30MM (2X)
M8 x 60MM (1X)
M8 Lock Nut (1X)
Lock Washer (2X)
" Flat Washer (3X)
Ratchet Strap Assembly (1X)
Spacer (2X)
Crossbar Connector (2X)
Mount Base (1X)
Anti-Seize (1X)

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
3
ACC-8000 RATCHET ASSEMBLY
ErgoRack Gen4
Crossbar Configuration
AluRack Light Duty
Crossbar Configuration
AluRack Heavy Duty
Crossbar Configuration
Mount Base
M8 x 20MM Hex Head
Lock Washer
Flat Washer
RATCHET ASSEMBLY INSTRUCTIONS
NOTE: Ladder Racks and Crossbars are shown throughout the Assembly Manual for illustrative purposes only, and
are not included with this Accessory.
This Kit contains only the parts needed to repair, replace, or retrot one Crossbar side. Order an additional kit for the
other Crossbar sides as needed.
1.2
1.1
Press Release Latch on
Ratcheting Handle.
Lift Handle.
RATCHET MOUNT ASSEMBLY 1.3 Install Hardware as shown and torque to 90 in-lbs.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪ TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
AluRack Heavy Duty
Crossbar Configuration
AluRack Light Duty
Crossbar Configuration
AluRack (ALL)
AluRack (Light Duty)
AluRack (Heavy Duty)
ErgoRack
ErgoRack
ErgoRack
AluRack
M8 x 20MM
M8 x 30MM
Install Hardware shown for your specic AluRack Crossbar,
and torque to 90 in-lbs.
Torque to 90 in-lbs.
Torque to 90 in-lbs.
2
Attach the the Mounting Clamp using the hardware shown
according to your crossbar conguration, and torque to 90 in-lbs.
3
4A
4B
ACC-8000 RATCHET SETUP AND MOUNITNG
RATCHET SETUP-ALURACK ONLY
ERGORACK CONFIGURATIONS SKIP TO STEP 3
RATCHET SETUP–ALL RACK MODELS
USAM-ACC8000-US01 Rev-A 0719