PROAIM TP-SPHF-01 User manual

1
Speechify Presidenal Teleprompter
(TP-SPHF-01)
Assembly Manua l
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Laptop/Tablet Tray with
C-Stand Adapter
Extendable Adapters
Beam Splier Glass
Adjustable Glass
Holder with Handle
Tray Holding Arm with Baby Pin
2 x Cleaning Clothes
Hand Gloves
10 x Binder Clip Allen Key L-Type
(Size: -4mm)

2
Speechify Presidenal Teleprompter Setup
Tray Holding Arm with Baby Pin
• Now place the clamp of the tray holding on
a tripod stand and lock it with the knob.
• Loosen the knob of the baby pin and move
the pin accordingly.
• Loosen the knob to unlock the clamp of the
tray holding.
Cloth Hood
Glass Protecve Case
Bag Packing

3
Laptop/Tablet Tray with C-Stand Adapter
• The stand would look like this aer aaching
the C-Stand adapter.
• Posion and place it on the C-stand adapter.
• Loosen the knob of the C-Stand adapter and
mount it on the baby pin.
• Now secure the C-Stand Adapter by
ghtening its knob.
Extendable Adapters
• Loosen the knob of the extendable adapter,
and then remove the adapter.
• Now lock the baby pin by the knob.

4
• Now secure the extendable adapter by
closing its knob from the boom of the
adapter.
• Loosen the bigger knob to open the
adjustable glass holder, and then mount it on
the top of the tripod stand.
• Now loosen the circular knob on the top of
the glass holder.
Adjustable Glass Holder with Handle
• Tighten the knob to secure the glass holder
on the tripod stand.
• Loosen the circular knob to change the angle
of the adapter.
• Tighten the circular knob to secure the
angle of the C-stand adapter.

5
• Cover the glass with the provided hood and
secure it using binder clips from three sides.
• Add the provided handle into the holder, and
ghten it properly.
• Now loosen the middle knob to adjust the
glass holder with the help of
the handle, and then ghten the knob again.
• Leave one side of the glass unclipped, as
shown in image.
• Raise the hood from the unclipped side and
put it over your camera (Not Included), as
shown in the image.
• Insert the mirror into adjustable glass holder
and secure it with the circular knob.

6
• Once the camera (Not Included) is covered,
properly clip the hood.
YOUR PROAIM SPEECHIFY PRESIDENTIAL TELEPROMPTER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.