PUTCO HORNET Manual

INSTRUCTION GUIDE
CONTENT LIST
Adapter Plate
10-32 Bolt
10-32 Nylock Nut
QTY
1
4
4
PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION
AND CHECK TO SEE THAT ALL PARTS ARE INCLUDED
ADAPTER PLATE
Congratulations on your purchase of a high quality PUTCO®product. Should
you need any application or technical assistance, feel free to call us at:
Monday-Friday 8:00am - 5:00pm (Central Standard Time)
Contact your PUTCO®dealer for other quality accessories.
1-800-247-3974
REQUIRED TOOLS
WRENCH
(size: 3/8” )
ALLEN WRENCH
(size: 1/8”)
950024I
These instructions are to be used in conjunction with the Hornet Light Bracket instructions.
These instructions detail parts and tips specific to mounting the 24” Standard Hornet
Light to the Hornet Light Bracket.

Hornet Instruction Guide - 24” Adapter Plate
1
Install the 24” adapter plate onto the Hornet light
bracket using the 10-32 nuts and bolts included with
the Hornet light.
2Using the 10-32 nuts and bolts included with
the adapter plate, install the 24” Hornet Light to
the now combined Hornet bracket and Hornet
adapter plate. This process is detailed in Figure 1.
3Proceed to the next step in the Hornet bracket
instructions.
Figure 1: Bracket and clamp.
Putco guarantees its Stainless Steel and Aluminum products against defects in workmanship and material for
as long as you own your vehicle. All painted products have a 90 day warranty on the painted surface. Any defects
resulting from faulty material or workmanship will be warranted by Putco and repaired or replaced at our discretion.
Putco assumes no extra labor costs. Damages caused by freight carriers, improper installation, misuse, collision, or
neglect will not be warranted by Putco.
950024I