Pyle view PLRD104 User manual

---=:- ~
... _aaiDa.:a ..... -

Contents
characteristics and effects ......... .... .................... 1
appearance and functions ........ . .............. ... ....... 2
insta II ation ........................... ... .. .................... . 3
remote control panel ........................................ .4
battery installation diagram for remote control ......4
operation ofDVD system ........ .... ................ .. .....5
system setup .. ........................... .... ...... ............ 5
functional description of USB/SO ......... ....... .. ...... 7
menu function setup ........................... .. ............ 7
introduction of door control line.. .................. .....10
Removal of simpie fauIts .. ....... .. ....... ................ 11
Ca utions .. ...... .... .................. ............... .......... 12

characteristics and effects
> OVO
>super-thin design is combined perfectly and the crystal glass
style for top panel
>digital technique, sharp image and no interference
>transmit frequency range of audio signal: FM87.7MHz/
FM88.1MHz/FM88.5MHz/ FM88.9MHz/FM1
06 .7MHz/
FM1 07.1 MHz/FM1 07.5MHz/FM1 07.9MHz.
>double period of infrared emission
>audio/video input and output
>fully functional remote operation
>USB/ SO /games
>built-in speakers
Specifications
Size of screen: 9.4 inch/10.4 inch
Pixel: 9.4 inch: 800x3 (RGB) x480
10.4
inch: 1024x3 (RGB) x600
Rated voltage: DC12V(voitage range:1OV-14V)
Power:
about 13W
-1-
Appearance and functions
CD Power switch and mode switch
~ play and pause
CID down and in /out
@
upand stop
@analogue+ and last song
@menu
-2-
(Z)a nalogue- and next song
@Iight switch
®standby switch
®l open key
@disc-in mouth

Installation
•
=-
•
•
III
CD
1. remove four screws on the bottom and disassemble metallic
support, as picture 1
2. screw down the top of metallic
support, as picture2. Make room for
wire (please be double careful to not
damage the top ofthe machine)
fr
•
¥S
•
•
3.install metallic support, link all parts and make room for wire
(keep the wire orderly lest extrude DVD chips, install special
screw to avoid becoming loose )
f,·-·J
®
-3-
III
II
•
1
1
Remote control u
,-,-- ch;anrlel to add and subtract
power switcl,-
TV I DVD <wiitrh ·- .
automatic search
I
R/ L witch A-B
volume to add
vo lume to subtract
mute
battery installation diagram for remote
control
attention:
1. do not directly touch infrared light
2. do not press remote control when
disassembling the battery cover of
remote control
3. take out battery when rarely using
/
Q) compact
tightly the
fastener
~ PUII out the
battery holder
4. normally, battery life is about one year. replace battery when the remote
control is not sensitive.
-4-

Operation of DVD system
Play DVDIDCD/CD
Put the DVD disc into the mouth with the label of disc upwards to
autoplay Press . ,,,o npanel orS on remote control to stop.
Press
~II on panel or ® on remote control to pause.
Play MP3
Insert the file storage media into the machine to autoplay
Press.;'" on panel or 8 on remote control to stop.
Press
~II on panel or ® on remote control to pause.
Press
~II on panel or ® on remote control when pausing to replay
Replay
I .
Press 8 to repeat one or more songs
2.press numeric key to directly play the specified song
System setup
Press button of setup on remote control to enter system and set menu.
Press 0 0
00 on remote control to choo se modification item
and press • to
en ter,as below picture.
-5-
I
J
!
'/
I.Television system: set DVD output image format and three formats of
NTSC/PALIAUTO can be chosen.
2.resume play: switch
of resuming play after power off
3.screen protection: switch ofscreen protection icon
4.screen picture ratio: choose image output ratio
as per request
5.password: set new 4 a password and the initial password
of system
is [0000)
6.level set: set parents lock
as perdifferent levels
7.setup ofdefault value: restore factory's initial settings
a.language showed on the screen: choose the language showed in the
menu
as per request
9. audio language: set disc output language
10. subtitle language: set disc subtitle language
II .menu language: set menu language of disc
Remark: the disc must support audio language, subtitle language and
menu language.
-6-

introduction of USB/50 function
1.enter: press @ under OVO mode and switch to the mode you need
in OVO ,USB and SO mode.
2.quit: press 8 or @ under USB/SOmode and then switch to
OVO
mode.
Menu function setup
Press §on panel or CD on remote control to enter the main menu.
Then
press'" Y < .> on panel or 0 000 on remote control
to setup and adjust
Main menu includes below parts
Image
Volume
Function
System
Preset
Time
Detailed setup as below diagram
1.image setup
1. brightness
PICTURE
2. contrast
3. color
4. reset: restore factory's
initial setting
-7-
2. Vol ume setup
1. volume adjust
2. infrared switch
3. FM switch
3. Functional setup
OPTION
1. language setup
2. image display setup
4.system setup
Remark: this function applies to the machine type
with TV functiono
1. color mode adjustment
2. accompanying sound
adjustment
3. channel swap
4. copy
-8-

5.preset
Remark: this function applies to the machine type with TV function
6. time setup
1. automatic channel searching
2.manual channel searching
3.channel fine-tuning
4.band segment display
5.program No.
6. Channel overthe switch
1. sleep timer function
2. clock setup function
3. timing ofthe shutdown function
4. function of resuming by alarm
-9-
2.audio frequency
PressA / V on panel or 00 on remote control and the screen displays
menu, then press <I> on panel or 88 on remote control to set
accordingly.
a: volume
Audio control, (you can choose infrared/speaker/radio/speaker, speaker/radio,
infrared/speaker/radio, radio, infrared, infrared/speaker, infrared/radio)
3. Functions
Press A / Von panel or 00 on remote control and the screen
displays below menu pictures, then press <I> on panel or 88
on remote control to set accordingly
introduction of door control line
the red wire connects DC power +12V
/ the black wire connects door control-12V
the yellow wire connects door control+12V
Attention
""""
""-
Customer can choose door control type
according to his own vehicle type.
-10-

Removal of simple fault
Faults possible reasons
No sound and
image power is disconnected; the machine is not turned on
No image standby switch is pressed down; disc
is scratched;
signal wire is disconnected;TV signal is weak
.-
No sound volume too low or the volume setup is not workable
Weak signal adjust the antennae; no appropriate frequency
Black screen incorrect setup of image luminance and contrast;
Undervoltage
Blurring and TV signal
is weak; disc is scratched
unstable image adjust the antennae;
Im age dithering TV may not receive the signal;
influence
of building ~r mountains in this reoion
Snow pattern on no signal or weak signal for TV;
the screen TV is interfered by other signal;
antennae is not installed properly
Color cast function menu setup is incorrect;
weak sinnal
No power voltage is not accurate: check interconnect circuit;
Fuse is disconnected: change fuse specification
No image after
on ly audio frequency for the disc;
loading the disc disc is scratched;
disc format is not supported
f---
Instable sound
caused by DVD is dirty or seriously damaged
vibration
Instable sound disc
is dirty or scratched;
even with no
vibration clean or replace the disc
L
-11-
I
Att ention
1.00 not pu t the machine in the rain or damp environment lest outbreak of
fire or any damage to machine.
2.
Do not repair the machine by yourself. Please turn off the machine and
inform us if any problem found,the factory or the agent will arrange spe-
cialized personnel to disassemble and repair the machine for you.
3.Please keep the machine away from dampness, dust, oil and straight sunlight.
4.00 not use diluents or other chemical cleaner when cleaning the machine.
Please clean the machine by soft cloth with special cleaner.
5.Please keep the machine
in a good environment. The storage temperature
for this machine is from -20
"C to 70 'C and the operating temperature for this
machine is from -10
"C to 60 "C .
6.00 not play without the support of disc, this machine supports DIVX I
MPEG4 IDV D / DVD+R ISVC D /VCD/DVC D /C D / MP3/WMA/CD-~
RW/HDCD+_R I JPEGorCD-ROM7 .
7.Please prevent the machine from the influence ofother equipment.
8.For your safety, please
do not turn on or operate this machine when driving
as it may
be illegal in some countries and regions.
9.Safe power suppl
y: DC12V(voltage range:10V-14V).
Attention
There may be some small and bright spots on the screen.
This is a common technical matter and does not indicate
any quality problem ofthis machine.
-12-