Pyle view PLRD94 User manual

Contents
" characteristics and effects..
............................... 1
appearance and functions
............................ ..... 2
installation........ ....... .. .......... ... ....................... 3
remote control panel...
....... ........................ .. .. .. .4
battery installation diagram for remote control .... .. 4
operation
of OVO system ................................... 5
system setup
................................................... 5
functional description of USB/SO.......... .. .. .......... ?
menu function setup.... ........ .. ......... ............ ...... ?
introduction of door control line ........... ..............10
Removal
of simple faults..... ......... .... ................ 11
Cautions .. . ............................. . ...................... 12

characteristics and effects
>DVD
>super-thin design is combined perfeclly and the crystal glass
style for top panel
>digital technique, sharp image and no interference
>transmit frequency range ofaudio signal: FM87.7MHz/
FM88.1MHtiFM88.5MHtiFM88.9MHtiFM106.7MHz/
FMl 07 .1 MHz/FMl 07.5MHz/FMl07.9MHz.
>double period of infrared em ission
> audio/video input and output
>fully functional remote operation
>USB/SD/games
>built- in speakers
Specifications
Size of screen: 9.4 inch/10.4 inch
Pixel : 9.4 inch: 800x3 eRGB) x480
10.4
inch: 1024x3 eRGB) x600
Rated voltage: DC12V(voltage range:10V-14Vj
Power: about 13W
-1-
Appearance and functions
G) Power switch and mode swit ch (D analogue- and next song
(2) play and pause @Iight switch
@down and in /out (2) standby switch
@ up and stop ®l open ke y
@analogue+ and last song
@menu
-2-
@disc-in mouth

Installation
1. remove four screws on the bottom and disassemble metallic
support, as picture 1
2. screw down the top of metallic
support, as picture2. Make room for
wire (please be double careful to not
damage the top
of the machine)
1)
A
¥s
A
A A
3.install metallic support, link all parts and make room for wire
(keep the wire orderly lest extrude DVD chips, install special
screw to avoid becoming loose )
®
-3-
A
Q
I
Remote control
TFT menu ",_ 'ch<lnnlel to add and subtract
power
SWIICI1 -••
TVI DVD sWllcn -- .A •••
automatic se;3rch -- I-
eeee
numeric Ke
y
-- _. GOO
back rev v in,d -
forward rewi
DVD menu-
e
OGOO
I
R/ Lwitch A- 8
volume to add
volume to subtract
mute
battery installation diagram for remote
control
attention:
1. do not directly touch infrared light
2. do not press remote control when
disassembling the battery cover of
remote control
3. take out battery when rarely using
p>
<Z) compact
tightly the
fastener
' PUll out the
battery holder
4. normally, battery life is about one year. replace battery when the remote
control is not sensitive.
-4-
,

Operation of DVD system
Play DVDIDCD/CD
Put the DVD disc into the mouth with the label of disc upwards to
autoplay Press . /I\o npanel ore on remote control to stop.
Press
~II on panel or @ on remote control to pause.
Play MP3
Insert the file storage media into the machine to autoplay
Press.fA on panel or 9 on remote control to stop.
Press
~II on panel or @ on remote control to pause.
Press
~II on panel or@ on remote control when pausing to replay
Replay
1.Press 8 to repeat one or more songs
2.press numeric key to directly play the specified song
System setup
Press button of setup on remote control to enter system and set menu.
Press 0 0 0 0 on remote control to choose modification item
and press • to enter,as below picture.
-5-
1
J
)
J
1.Television system: set DVD output image format and three formats of
NTSCIPALIAUTO can be chosen.
2.resume play: switch of resuming play after power off
3.screen protection: switch ofscreen protection icon
4.screen picture ratio: choose image output ratio as per request
5.password: set new4 a password and the initial password of system
is [0000]
6. level set: set parents lock as per different levels
7.setup of default value: restore factory's initial settings
> •
8.language showed on the screen: choose the language showed in the
menu
as per request
9. audio language: set disc output language
10. subtitle language:
se t disc subtitle language
11.menu language: set menu language ofdisc
Remark: the disc must support audio language, subtitle language and
menu language.
-6-

introduction of USB/SO function
1.enter: press @ under DVD mode and switch to the mode you need
in DVD,USB and SD mode.
2.quit: press e or @ under USB/ SD mode and then switch to DVD
mode.
Menu function setup
Press §on panel or. on remote control to enterthe main menu.
Then
press" Y <> on panel or 0 000 on remote control
to setup and adjust
Main menu includes below parts
Image
Volume
Function
System
Preset
Time
Detailed setup as below diagram
1.image setup
PICTU RE
1. brightness
2. contrast
3. color
4. reset: restore factory's
initial setting
-7-
2. Vo lume setup
1. volume adjust
2. infrared switch
I
3. FM switch
3. Functional setup
1. language setup
2. image display setup
4.system setup
Remark: this function applies to the machine type
with TV function.
1. color mode adjustment
2. accompanying sound
adjustment
3. channel swap
4. copy
-8-

5.preset
Remark: this function applies to the machine type with TV function
1. automatic channel searching
2.manual channel searching
3.channel fine-tuning
4.band segment display
5.program No.
6. Channel over the switch
6. time setup
1. sleep timer function
2. clock setup function
3. timing of the shutdown function
4. function of resuming by alarm
-9-
2.audio frequency
Press" i V on panel or CDCD on remote control and the screen displays
menu, then press <I> on panel or 88 on remote control t9 set
accordingly.
a: volume
Audio control, (you can choose infrared/speaker/radio/speaker, speaker/radio,
infrared/speaker/radio,radio, infrared, infrared/speaker, infrared/radio)
3. Functions
Press A / Von panel or CDCD on remote control and the screen
displays below menu pictures, then press <I> on panel or 88
on remote control to set accordingly
introduction of door control line
Attention
~
/ the
red wire connects DC power +12V
the black wire connects door control-12V
the yellow wire connects door control+12V
Customer can choose door control type
according to his own vehicle type.
-10-
- I

Removal of simple fault
Faults possible reasons
No sound and
image power is disconnected; the machine
is not turned on
No image standby switch is pressed down; disc
is scratched;
signal wire is disconnected;TV signal is weak
--
No sound volume too low or the volume setup is not workable
Weak signal adjust
th e antennae; no appropriate frequency
Black screen incorrect setup of image luminance and contrast;
Undervoltage
Blurring and TV signal is weak; disc is scratched
unstable image adjust the antennae;
Image dithering TV may not receive the signal;
influence
of buildinas or mountains in this region
Snow pattern on
no signal or weak signal for TV;
TV is interfered by other signal;
the screen antennae is not installed properly
Color cast function menu setup
is incorrect;
weak sianal
No power voltage
is not accurate: check interconnect circuit;
Fuse is disconnected: change fuse specification
No image after only audio frequency for the disc;
loading the disc disc is scratched;
disc format is not supported
In stable sound
caused by DVD is dirty or se
ri ously damaged
vibration -
Instable sound disc is dirty or scratched;
even with no
vibration clean or replace the disc
-11-
Attention
1.00 not put the machine in the rain or damp environment lest outbreak of
fire or any damage to machine.
2.Do not repair the machine by yourself. Please turn offthe machine and
inform us if any problem found, the factory or the agent will arrange spe-
cialized personnel to disassemble and repair the machine for you .
3.Please keep the machine away from dampness, dust, oil and straight sunlight.
4.Do not use diluents or other chemical cleaner when cleaning the machine.
Please clean the machine by soft cloth with special cleaner.
5.Please keep the machine
in a good en vironment. The storage temperature
for this machine
is from _20 °C to 70 T and the operating temperature for this
machine is from -10T to 60 °C .
6.00 not play without the support of disc, this machine supports DIVX I
MPEG4 I DVD / DVD+R I SVCD / VCD / DVCD / CD / MP3 / WMA / CD-~
RW I HDCD +_R I JPEG or CD -ROM7.
7.Please prevent the machine from the influence ofother equipment.
8.For your safety, please do not turn
on or operate this ma chine when driving
as it may
be illegal in some countries and regions.
9.Safe power supply:
DC 12V(voltage range: 1 OV-14 V).
Attention
There may be some small and bright spots on the screen.
This is a common technical matter and does not indicate
any quality problem ofthis machine.
-12-