Pyramid TIMETRAX SYNC RF User manual

TIMETRAX™ SYNC RF WIRELESS ANALOG CLOCK
Installation Instructions
OVERVIEW
I2254
Page 1 of 4
888.479.7264
pyramidtimesystem.com
ETHERNET
Thank you for choosing a TimeTrax™ Sync RF Wireless Clock System. The TimeTrax™ RF Wireless Clock System
receives dependable, accurate time from the TimeTrax™ Sync RF Wireless Transmitter.
IMPORTANT: Prior to clock installation, install TimeTrax™ Sync RF Wireless Transmitter and complete software
set-up (part #9T1WI or S9DWXSLAUB sold separately).
IMPORTANT: WIRING SHOULD BE COMPLETED PER ELECTRICAL CODE AND PERFORMED BY A LICENSED
ELECTRICIAN. Before clock installation, please remove security bracket from back of clock (see instructions below).
For more information, visit pyramidtimesystems.com or call our technical support team at 888.479.7264 during
regular business hours: 8am-5pm EST, M-F.
SECURITY BRACKET REMOVAL
Prior to installation, detach metal security bracket from clock by inserting included release key into slot
located on back of clock.
Push key all the way into slot. Key will slide easily until some resistance from locking tab is felt.
With key fully engaged, slide the security bracket up and off of the clock.

TIMETRAX™ SYNC RF WIRELESS ANALOG CLOCK
Installation Instructions (cont.)
WIRED MODELS
WIRING SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN AND IN COMPLIANCE WITH ELECTRICAL CODE.
Install metal security bracket onto a standard electrical box.
Make electrical connections. This should only be performed by a licensed electrician.
Push clock onto security bracket aligning four tabs on bracket with four matching slots on back of terminal.
Slide clock downward until locking tab clicks into place. When properly mounted, clock cannot be slid up
and off bracket without using included wall bracket release key to disengage locking tab.
Upon power up, clock will initially hone itself to 12:00. Clock will synchronize to the RF Wireless
Transmitter immediately upon receiving a radio signal (typically 1-2 minutes).
I2254
Page 2 of 4
888.479.7264
pyramidtimesystem.com
BATTERY OPERATED MODELS
Install one lithium C size battery (part #42224 sold separately) into compartment on back of clock. Clock
will initially hone itself to 12:00. Clock will synchronize to the RF Wireless Transmitter immediately upon
receiving a radio signal (typically 1-2 minutes).
Hang clock on security bracket (see steps 1&3 above).

TIMETRAX™ SYNC WIRELESS RF ANALOG CLOCK
Installation Instructions (cont.)
Time Base
Microprocessor
Time Update
Frequency
Every 20 seconds (wired)
Every 24 hours (2am) (battery-operated)
Method
902-928 MHz (frequency-hopping technology)
BATTERY
AC POWER 120/240 AC
Power Input
3.6 Volt Lithium
105-265V AC 50/60Hz
Average Power
Consumption
N/A
0.066 Watts
Operating Temp
-30°F (-34.44°C) to 130°F (54.44°C)
Warranty
3-Year manufacturer’s limited warranty
Guarantee
30-Day money back guarantee
Compliance
IEEE 802.3af/ANSI X3.263
Includes
Security mounting bracket & key, wall mounting
template, security mounting bracket template
ABS
WOOD
Display
12 Hour, 12 Hour
w/seconds, 12/24 Hour
or Custom Face
12 Hour, Roman
Numeral
Case
Smooth surface
94VO/5VA ABS (black,
silver or taupe finish)
Cherry, Oak or Walnut
Hardwood (stain &
polyurethane)
Face
Double opaque styrene
Lens
Shatterproof, side molded, polished polycarbonate
crystal
Mounting
Wall & Dual Wall or Ceiling (ABS bezel)
SIZE/MATERIAL
WEIGHT
DIMENSIONS
13in ABS Bezel
2.8lbs
(1.3kg)
13.25in x 2.5in
(33.7cm x 6.5cm)
17in ABS Bezel
4.1lbs
(1.9kg)
17in x 2.5in
(43cm x 6.5cm)
16in Wood Bezel
5.5lbs
(2.5kg)
16.5in x 2.4in
42cm x 6.4cm)
20in Wood Bezel
8.1lbs
(3.8kg)
20.25in x 2.4in
(51.1cm x 6.4cm)
SPECIFICATIONS
I2254
Page 3 of 4
888.479.7264
pyramidtimesystem.com

TIMETRAX™ SYNC WIRELESS RF ANALOG CLOCK
Installation Instructions (cont.)
PART#
DESCRIPTION
SASDLCWDXX*
TimeTrax™ Sync Software
APOEPI
Ethernet Port Injector & 6ft power cable
42227-1
20ft Category 5E Ethernet Cable
42320
Dual 13in Analog Clock Wall Bracket
42443
Dual Analog & Digital Ceiling Bracket
42314
13in Analog Chrome Wire Guard
42315
17in Analog Clock Chrome Wire Guard
42690
13in Analog Clock Wash Down Enclosure
42606
Analog Security Mount Replacement
42281
Wall Clock Security Mount Replacement Key
*Required for clock synchronization.
WARRANTY
3-YEAR LIMITED WARRANTY
Pyramid warranties its Synchronized Clock System to the original user against defective material or workmanship for
a period of 3 years from date of purchase.
The manufacturer’s responsibility under this Warranty is limited to repair or replacement of defective part or parts.
Pyramid reserves the right to determine whether parts failed because of defective material, workmanship, or other
causes. Failure caused by accident, alteration, misuse or improper packaging of returned unit is not covered by this
Warranty. Any repair to equipment other than by Pyramid voids the Warranty. Users in territories other than USA,
Canada, South America & Australia should contact the Dealer from whom the unit was purchased. The rights under
this Warranty are limited to original user and may not be transferred to subsequent users.
If Customer Support cannot troubleshoot your problem over the phone, we will replace your unit free of charge if it
is within warranty period. Please contact Customer Support at 888.479.7264 between the hours of 8am-5pmEST for
details.
Should you need to speak live to one our representatives, please call toll-free (US/Canada) at 888.479.7264 during
regular business hours: 8am-5pmEST, Monday-Friday.
ACCESSORIES
WARRANTY
TECHNICAL SUPPORT
I2254
Page 4 of 4
888.479.7264
pyramidtimesystem.com