RADEMACHER Troll Comfort Service manual

RADEMACHER
Mounting- and
Operating Instruction
comfort
Article No. 2610
VBD 377-1 (06.02) GB

RADEMACHER
...with the purchase of the TUBE MOTOR CONTROL you
have decided in favour of a quality product from the
House of Rademacher. We thank you for your confidence.
This instruction…
…describes the mounting and the electrical installation
of your TROLL.
Please read through this instruction completely.
Observe all safety advices before starting with
your work. Please keep this instruction for furt-
her reference.
The guarantee expires in the case of damages occurring
from not observing this instruction and the safety advices.
We do not accept any liability for indirect damages
resulting from this.
Dear Customer, ...

RADEMACHER
3
Overall view
UP Key
Down Key
Operating
mode
selection
LCD-Display
Twilight Key
Sun Key
Covering
Clock Key
Weekly Key SET Key
IR-Receiver
Installation-
housing
without
illustration
Summer-
Winter time
Plug
connection
for the light sensor on the rear of the housing

RADEMACHER
4
Contents
Overall view ................. 3
Explanation of signs ....... 5
Correct application ......... 6
Wrong application ......... 7
Safety instructions ........... 8
Functional description .... 10
Connection instructions .... 18
Safety instructions ......... 19
Electrical connection ..... 20
Mounting instructions .... 21
Mounting procedures .... 22
Mounting construction ... 23
Light sensor mounting .... 24
Light sensor position ..... 25
Setting instructions ........ 26
Start-up ....................... 27
Basic settings ................ 28
Standard program ........ 30
Weekly program .......... 32
Sun automatic .............. 39
Twilight automatic ......... 42
Manual operation ......... 43
External Switch ............. 47
IR-Remote control ......... 48
Software-reset .............. 53
What to do, if...? .......... 55
Technical Data .............. 62
Work settings ............... 64
Accesories .................. 65
Switch programs .......... 66
Guarantee ................... 67

RADEMACHER
5
Explanation of Signs
Danger to life caused by electric shock
This sign indicates dangers, when working on
electrical connections, components, etc. It
requires safety measures for the protection of
health and life of the person concerned.
Here it concerns your safety
Please do observe and obey all instructions
marked like this.
COMMENT
In this way we draw you attention to the
perfect function of important contents.
The necessary steps to be taken are indicated
in form of enumeration.
▼
▼

RADEMACHER
6
Local operation
The TROLL tube motor control is only to be used for the
connection and control of a tube motor. The tube motor
has to be equipped with an end limit switch (mechanic
or electronic).
Please do observe the instructions given by the
motor manufacturers regarding switching time
and maximum operating time.
Operating Conditions
Do only operate the Troll in dry rooms.
The mounting place has to be equipped with a po-
wer
supply of 230 V/50 Hz including an installed
clearing device (safety fuse) for the electrical
connection.
Correct Application

RADEMACHER
7
It is not allowed to connect or control other
consumers or facilities, than the ones stated
above.
Do only use original parts of the
manufacturer.
The TROLL roller shutter control, the manual sender, and
the Rademacher tube motors are coordinated components.
Non-original components, which replace or influence the
function of the Troll are to be employed only after being
released particularly by Rademacher GmbH. As
manufacturer we do not accept any guarantee for the
application of non-original components and the indirect
damages resulting from this.
Wrong Application

RADEMACHER
8
Safety Instructions
Danger to life exists caused by
electric shock
The electrical connection of the Troll is only
allowed to be executed by an authorized
electrician. Observe the regulations of the
local power supplier.
Before starting to execute the electrical
connection switch the power line/
connecting point in an idle condition and
secure it against restoring power.
Control if the power line/connecting point
is really in an idle condition.

RADEMACHER
9
Safety Instructions
The application of defective appliances
can endanger people and cause
damages (electric shock, short circuit).
Before mounting examine the Troll for not
being damaged and do never use defective
or damaged appliances.
In this case please do contact our service
department.
Incorrect executed repairs can en-
danger your life caused by electric
shock or it can lead to the destruction
of the Troll.
Please have all your repairs on the Troll executed
by an authorized service department.

RADEMACHER
10
Functional Description
The Troll serves to control the tube motors and it can be
mounted in each commercial flush box using the enclosed
installation housing.
The different operating modes and functions:
Manual mode
- with the operating keys on the appliance
- with the assistance of an external sensor
- with an infrared manual sender
Automatic mode
- Standard and weekly program
- Sun automatic
- Twilight automatic
- Random mode
Additional
- Switching between summer and winter time

RADEMACHER
11
Functional Description
The LCD-Display of the TROLL informs you about:
the adjusted operating mode
the activated functions
the actual day time
the adjusted swichting times
Clock
IR-
Funcion
22
22
222
22
2:::::ii
ii
i 77
77
7
▲▲
▲▲
▲▼▼
▼▼
▼ AUTO MANU
Down
Up
Operating
modes
MO DI MI DO FR SA SO
Display of the
Weekdays
Sun- or twilight
symbol
Winter- and
summer time
Wi
So
i

RADEMACHER
12
Functional Description
Manual mode
Operation by hand is always possible
Using manual mode the roller shutter can be opened/closed
with the (▲) UP and (▼) DOWN key and stopped again.
The manual operation is possible with …
the operating keys on the appliance
with the assistance of an external switch
In addition, the parallel connection of several Trolls
on one external switch permits the mutual “remote”
control of several roller shutter drives.
one infrared sender of Rademacher
For this reason, the Troll is equipped with an infra-
red
receiver. In addition, with the infrared manual sender
the control of several drives is possible.

RADEMACHER
13
Functional Description
Automatic mode / Standard program
Adjustment of an opening
and closing time for your
roller shutter. The adjusted
switching times are valid for
all weekdays.
Automatic mode / Weekly program
Individual every day adjust-
ment of the opening and
closing time for your roller
shutter. In addition, it is
possible to adjust one opening
and closing time, respective,
valid for all weekdays.
➜
00
00
088
88
8:::::00
00
000
00
0
▲▼▲▼
▲▼▲▼
▲▼ AUTO
➜
MO
22
22
222
22
2:::::00
00
000
00
0
▲▼▲▼
▲▼▲▼
▲▼ AUTO
➜

RADEMACHER
14
Functional Description
Automatic mode / Random mode
You can set the time control
to random mode via the
selection key for operating
modes. Through this, the
adjusted switching times are
delayed by up to 30 minutes.
Automatic mode OFF
With the assistance of the
selection switch for operating
modes, the automatic mode
can be switched off. All
adjusted switching times are
not effective any more. Sun
and twilight functions continue
to be valid.
MO
2222
2222
22:::::IIIII00
00
0
▲▼▲▼
▲▼▲▼
▲▼ AUTO
➜
IIIII22
22
2:::::00
00
000
00
0
▲▼▲▼
▲▼▲▼
▲▼ AUTO MANU
➜

RADEMACHER
15
Functional Description
Sun and twilight automatic
The sun and twilight automatic together with the light
sensor (Article no. 3720) allow the control of your roller
shutter depending on the brightness. In this case the light
sensor is fastened to the window pane and connected to
the Troll using a plug.
Sun automatic
The sun automatic enables the automatic moving down
and up of the roller shutter after the adjusted limiting
values are exceeded. The final position of the roller shutter
can be chosen via the position of the light sensor situated
on the window pane.

RADEMACHER
16
Sun automatic
If the adjusted limiting value is
exceeded by daylight, the roller
shutter is lowering until the light
sensor is reached after approxi-
mately 10 minutes.
After approximately 25 minutes the
roller shutter is moving up for a
short distance to release the sensor.
In case of further sun exposure the
roller shutter remains in this
position.
With decreasing brightness the
roller shutter moves to the upper
limit stop.
Functional Description
10 Min.
25 Min.

RADEMACHER
17
Functional Description
Twilight automatic
With entering of twilight the roller
shutter lowers after the pre-
adjusted limiting value is
exceeded for approximately 10
seconds moving to the bottom limit
stop.
The roller shutter does not open
before the adjusted opening time
is reached or after manual com-
mand UP.
COMMENT
If the moving down of your shutter is to be executed by
twilight automatic you have to adjust the automatic
closing time to a time after the twilight is entered.

RADEMACHER
18
Before the electrical connection
Assembly and electri-
cal connection of the
Troll…
… are only to be executed with
the enclosed installation
housing. The connection ter-
minals are located on the
bottom side of the installation
housing.
Limit stops adjustment of the tube motor
Before the final electrical connection is executed the limit
stops of the tube motor have to be adjusted. Please do
observe the details of the respective operating instructions.
You are urgently requested to adjust both limit
stops as otherwise malfunction can occur.

RADEMACHER
19
Safety instructions/Electr. connection
Danger to life exists caused by electric shock.
The electrical connection of the Troll is only
allowed to be carried out by an authorized
electrician. Please do observe the safety
instructions stated on page 8.
Faulty wiring can lead to short circuit and to
the destruction of the appliance.
Please do observe the sequence of the pin
connection.
Please do observe the details regarding the
electrical connection stated in the operating
instruction of your tube motor.

RADEMACHER
20
PE
N
L1
MOTOR
1
NL1
▲
▲
▲
▲
Secondary
entries
Electrical connection
Basic circuit diagramm
Secondary entries only on request