Radio Shack CENTRAL 2000 49-351 User manual

Cat. No. 49-351
OWNER’S MANUAL
Please read before using this equipment.
CENTRAL 2000
Easy Installation Monitored Motion Detector
Security System
ARMED POWERSERVICE
49-351.fm Page 1 Wednesday, August 18, 1999 4:37 PM

2
FEATURES
Your Radio Shack Central 2000 Easy
Installation Monitored Motion Detector
Security System brings a new level of
protection to your home. Its PIR (Pas-
sive InfraRed) motion sensor gives a full
180 degrees of coverage. Once armed,
it reports movement to ORCA®Monitor-
ing Service’s trained staff of security
professionals who call you to verify the
problem and then call the police and up
to three other people you designate.
Your system includes these features:
Simple Installation—lets you start us-
ing the system by simply connecting it to
power and a telephone line and setting
up your account with ORCA Monitoring
Services.
Built-In 100 dB Alarm—sounds when
the system is armed and detects mo-
tion.
Warnin
g
Stickers—discourage poten-
tial burglars byalerting them to the pres-
ence of an alarm system.
Eas
y
Armin
g
and Disarmin
g
—uses
the telephones in your home for quick
arming and disarming.
ORCA-Monitored Securit
y
—means
you get 24-hour monitoring, which
alerts the police, neighbors, or you at
work if the system detects unauthorized
motion.
INCLUDED ITEMS
Your Central 2000 inlcudes the follow-
ing accessories. Be sure you remove all
accessories before you dispose of the
packing materials.
• Central 2000 Motion Sensor
• Modular Telephone Cord
• Duplex Telephone Adapter
• AC Power Adapter
• Quick Reference Card
• ORCA Monitoring Service Agree-
ment and Preprinted Envelope
• Four Window Stickers
• Wall Mounting Bracket with Screws
In addition, you need one 9-volt battery
(Radio Shack Cat. No. 23-553, not sup-
plied) to power your system during a
power failure.
LOCAL PERMIT
REQUIREMENTS
Some cities and municipalities require
you to fill out a registration form and get
a permit for monitored alarm service.
We recommend that you contact your
local police or sheriff’s department and
inquire about local permit requirements.
Radio Shack and ORCA, the security monitoring company, are independant of one another.
No warranty or guarantee of performance of the ORCA Monitoring Services Agreement
is provided by Radio Shack.
© 1995 Tandy Corporation.
All Rights Reserved.
Radio Shack is a registered trademark used by Tandy Corporation.
ORCA is a registered trademark of ORCA Technology, Inc.
49-351.fm Page 2 Wednesday, August 18, 1999 4:37 PM

3
Warning: To prevent fire or shock haz-
ard, do not expose this product to rain
or moisture.
Thissymbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s en-
closure that might be of sufficient
magnitude to constitute a riskof elec-
tric shock. Do not open the product’s
case.
Thissymbolis intended to inform you
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
Note: The security functions of this sys-
tem have not been tested by UL.
READ THIS BEFORE
INSTALLATION
We have designed your security system
to conform to federal regulations, and
you can connect it to most telephone
lines. However, each device that you
connect to the phone line draws power
from the phone line. We refer to this
power draw as the device’s Ringer
Equivalence Number, or REN (shown
on the back of your system).
If you are using more than one phone or
other device on the line, add up all the
RENs. If the total is more than five, your
phones might not ring. In rural areas, a
total REN of three might impair ringer
operation. If ringer operation is im-
paired, disconnect one of the devices
from the line.
This security system complies with Part
68 of
FCC Rules
. You must, upon re-
quest, provide the FCC registration
number and the REN to your phone
company. Both numbers are shown on
the back of the system.
Note: You must not connect this system
to:
• Coin-operated systems
• Party-line systems
• Most electronic key telephone sys-
tems
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
CAUTION !
!
49-351.fm Page 3 Wednesday, August 18, 1999 4:37 PM

4
CONTENTS
How the S
y
stem Works ...................................................................................... 5
Setting Up Monitored Service ......................................................................... 5
Preparation .......................................................................................................... 7
Selecting a Location ....................................................................................... 7
Testing the Location ........................................................................................ 8
Mounting the System ...................................................................................... 9
Installing a Backup Battery ............................................................................. 9
Connecting to Power .................................................................................... 10
Connecting to the Telephone Line ................................................................ 10
Using the Warning Stickers ........................................................................... 11
Operation ........................................................................................................... 12
Arming the System ....................................................................................... 12
Disarming the System .................................................................................. 12
Remote Arm/Disarming ................................................................................ 13
Alarm Conditions .......................................................................................... 13
Understandin
g
S
y
stem Indicators ................................................................... 14
Clearing the Service Indicator ...................................................................... 14
Testin
g
the S
y
stem ........................................................................................... 15
Testing Coverage .......................................................................................... 15
Testing the Siren ........................................................................................... 15
Testing the Monitoring Service ..................................................................... 15
Care and Maintenance ...................................................................................... 16
The FCC Wants You to Know ....................................................................... 17
Lightning ....................................................................................................... 17
Troubleshootin
g
................................................................................................ 18
49-351.fm Page 4 Wednesday, August 18, 1999 4:37 PM

5
HOW THE SYSTEM WORKS
Your security system detects move-
ment within a 180° arc up to 36 feet
away. Once your system is armed, any
movement within this range automati-
cally triggers the alarm.
After you set up your account with
ORCA Monitoring Services, your sys-
tem calls and reports alarms to their
trained staff of security professionals.
The ORCA Monitoring Services staff
first tries to contact you to verify that it is
not a false alarm. By calling you first,
ORCA Monitoring Services ensures
that the police are not contacted if you
accidentally set off your alarm.
In alarm situations, the monitoring cen-
ter dispatches the police to your ad-
dress and tries to contact someone you
listed on your emergency call list. (You
might want to list your work phone num-
ber as the first number.)
ORCA Monitoring Services tries each
number once in the order that you listed
them on your monitoring agreement. If
ORCA Monitoring Services contacts
one of the people listed, they do not dis-
turb the other people on the list.
SETTING UPMONITORED
SERVICE
To set up service, you need to:
• Fill out the enclosed monitoring
agreement and mail or fax it to
ORCA Monitoring Services.
Monitored service does not begin
until ORCA Monitoring Services
receives and processes your moni-
toring agreement. Allow 24 hours
for faxed requests and 5 days for
mailed requests.
• Install the system
• Call ORCA Monitoring Services at
1-800-FOR-ORCA (1-800-367-
6722) from a telephone on the
same line as your system to have
the system initialized.
During the call, ORCA Monitoring
Services programs the PIN and
other settings (listed on Page 6)
into the system. The preferred set-
tings work best for most situations.
However, you can ask ORCA Mon-
itoring Services to change these
settings to make the system work
best for you.
49-351.fm Page 5 Wednesday, August 18, 1999 4:37 PM

6
Place a check mark next to any settings you want to discuss with ORCA Monitoring
Services, and refer to this page when you call them to set up service.
oYour Personal Identifica-
tion Number (PIN)
Preferred settin
g
:You select the
4-digit PIN you use to control your
system.
Note: Do not select a PIN that
starts with 0, 911, or 411.
Your PIN: ______________
oEntry and Exit Delays
Preferred settin
g
: 60-second exit
delay; 30-second entry delay.
Each can be set from 20 to 275
seconds.
oEntry Delay Warning Beeps
Preferred settin
g
:Beeping during
the entry delay.
Can be set to sound only one beep
at the beginning of the entry delay.
oAlarm Delay
Preferred settin
g
:Delay siren
until ORCA Monitoring Services is
notified.
Can also be set to sound immedi-
atly after the alarm is triggered.
oTouch Tone Dialing
Preferred settin
g
:Touch-tone
dialing.
Can be set to use rotary dialing if
you do not subscribe to touch-tone
service from your local telephone
company.
oSilent Alarm
Preferred settin
g
: Audible alarm.
Can be set to only call ORCA Mon-
itoring Services and not sound the
siren at all.
oSecurity System Answer
Preferred settin
g
:The system
answers the phone in 8 rings.
Can be set not to answer or to
answer in 1 to 10 rings.
49-351.fm Page 6 Wednesday, August 18, 1999 4:37 PM

7
PREPARATION
SELECTING A LOCATION
For your security system to be most ef-
fective, you need to install it in a location
that meets all of the following condi-
tions:
• Is near an AC outlet.
Note: If your best location is not
near an AC outlet, you can have an
electrician install an outlet for you.
• Is near a modular telephone jack.
Note: If your best location is not
near a modular telephone jack, you
can install a modular jack yourself
or have the telephone company
install one for you.
– Radio Shack stores sell jacks,
adapters, and telephone wiring.
– The telephone company charges
to install the necessary jacks.
– The USOC number of the jack to
be installed is RJ-11C (or RJ-
11W for a wall plate jack).
• Overlooks an area that an intruder
would most likely cross when
entering or moving through your
home.
You can place the system on a
shelf or table, or mount it on a wall
or in the corner of a room. The sys-
tem detects movement by sensing
a change in temperature within its
field of view. When someone walks
past the system, it detects the tem-
perature change and triggers the
alarm.
Also, note that the system is more
sensitive to movement across its
coverage area than to movement
directly toward or away from it.
Direction
of entry
Less sensitive
direction
Most Sensitive
Least Sensitive
49-351.fm Page 7 Wednesday, August 18, 1999 4:37 PM

8
• Does not directly face a window,
heating or air conditioning vent,
appliance, outside wall, or other
heat source.
These sources could produce rapid
temperature changes that the sys-
tem might incorrectly identify as an
intruder.
• Is high enough not to be triggered
by pets, yet is low enough to be
triggered by someone of average
height walking across the area.
To help prevent false alarms
caused by pets, the system senses
motion at or above its mounted
location. It does not sense motion
below where you mount it. In most
installations, a location about 31/2
feet off the floor provides the best
security.
TESTING THE LOCATION
Once you select a location and before
you mount it, follow these steps to test
the system’s coverage.
Note: To test the location, you do not
need to connect the system to the
phone line, install a backup battery, or
set up service.
1. Plug the power adapter’s barrel
plug into the jack on the back of the
system as shown on Page 10.
2. Plug the power adapter into an AC
outlet as shown on Page 10.
Notes:
• If you have not installed a
backup battery, the POWER
indicator flashes.
• If you have not connected the
system to the phone line, the
system chirps once per second.
3. Place the system at the selected
location. If you selected a location
on a wall, place the system on a
stepladder or something similar to
position it as close as possible to
its final mounting location.
4. Walk around the area you want to
protect. When the system detects
your movement, its ARMED indica-
tor flashes.
5. Adjust the system’s position until
you are satisfied with its coverage.
Ran
g
e
(f
M
ount
i
ng
Height (ft)
5
10 2005 15 25 30 35 40
10
49-351.fm Page 8 Wednesday, August 18, 1999 4:37 PM

9
MOUNTING THE SYSTEM
You can mount the system on a wall or
simply place it on a desk, table, or shelf.
To mount the system on a wall, use the
supplied screws, or screws suitable to
the mounting surface, to secure the
mounting bracket at the selected loca-
tion.
After you connect the system to power,
install a battery, and connect it to the
telephone line, you will simply hang the
system on the bracket.
INSTALLING A BACKUP
BATTERY
If AC power is disconnected or fails,
your system operates for up to 24 hours
from a 9-volt alkaline battery (Radio
Shack Cat. No. 23-553, not supplied).
Warning: To prevent a possible electric
shock, always disconnect the system
from the phone line before you install or
replace the battery.
Follow these steps to install the battery.
1. Lift off the battery compartment
cover.
2. Clip a 9-volt alkaline battery onto
the battery contacts, then place the
battery into the compartment.
3. Replace the cover.
When the battery becomes low, the
POWER indicator blinks. Replace the
battery immediately.
Mounting on a Wall Mounting in the Corner
ARMED POWERSERVICE
49-351.fm Page 9 Wednesday, August 18, 1999 4:37 PM

10
CONNECTING TO POWER
1. Plug the power adapter’s barrel
plug into the jack on the back of the
system.
2. Plug the power adapter into an AC
outlet.
CONNECTING TO THE
TELEPHONE LINE
1. Plug one end of the supplied mod-
ular telephone cord into the jack on
the back of the system.
2. Plug the other end of the cord into
a modular telephone jack.
Follow these steps to use the supplied
duplex adapter to connect the alarm
system and a telephone to the same
jack.
1. Unplug the telephone’s cord from
the jack.
2. Plug the duplex adapter into the
jack.
3. Plug the telephone’s cord into one
of the adapter’s jacks.
4. Plug one end of the supplied mod-
ular telephone cord into the jack on
the back of the system.
5. Plug the other end of the cord into
the other jack on the adapter.
If the phone line is disconnected while
the system has power, the system
chirps once per second.
TELEPHONE
CORD
From
Telephone
49-351.fm Page 10 Wednesday, August 18, 1999 4:37 PM

11
USING THE WARNING
STICKERS
The four enclosed warning stickers are
an important part of your security sys-
tem. Statistics show that homes with a
security system are 15 times less likely
to be burglarized than homes that do
not have a security system. The stickers
are a first line of defense, warning a po-
tential burglar that you have a system
installed.
Place a sticker at areas where intruders
would most likely enter your home, such
as:
• The front door (most burglars enter
this way)
• The back door
• Front and rear windows
• Fire escape windows (in apartment
buildings)
• Side windows
Radio Shack stores sell additional stick-
ers if you need more than the four sup-
plied.
49-351.fm Page 11 Wednesday, August 18, 1999 4:37 PM

12
OPERATION
ARMING THE SYSTEM
You can arm your system for either de-
layed or instant alert.
When
y
ou arm the s
y
stem for de-
la
y
ed alert, the system waits for the en-
try delay before sounding the alarm.
The default entry delay is 30 seconds,
but you can have ORCA Monitoring
Services set it to be from 20 to 275 sec-
onds. The system beeps once per sec-
ond during the entry delay, unless you
have selected to have it beep only once.
When
y
ou arm the s
y
stem for instant
alert, the alarm sounds instantly when it
detects motion. If you select instant
alert, be sure you can get to a telephone
to disarm the system without moving
through the protected area.
The system provides an exit delay for
both delayed and instant alert arming.
The default exit delay is 60 seconds, but
you can have ORCA Monitoring Servic-
es set this to be from 20 to 275 seconds.
Follow these steps to arm the system.
1. Lift your phone’s handset and dial
1-800-YOUR PIN. For example, if
your PIN is 6864, dial 1-800-6864.
2. Press A (2) on your phone’s key-
pad to arm the system for delayed
alert or I (4) to arm the system for
instant alert.
You hear one beep through the
phone.
Note: If the system beeps three
descending tones when you arm it,
it has detected a fault with the
system—either the AC power is
disconnected, the backup battery is
dead, or the SERVICE indicator is
flashing. Disarm the system. Then
correct the problem and try again.
3. Hang up the handset within 60 sec-
onds of entering the command.
The system beeps once and the
ARMED indicator turns on. After
the exit delay (60 seconds default),
the system responds to motion.
DISARMING THE SYSTEM
To disarm the system, lift your phone’s
handset and dial 1-800-YOUR PIN and
D (3). The system beeps twice through
the phone. Hang up the phone within 60
seconds. The system beeps twice to
confirm, then disarms.
Notes:
• If the system beeps three steady
tones, the alarm sounded while you
were away. Call ORCA Monitoring
Services to get details about the
alarm.
• If the system beeps three descend-
ing tones, it has detected a fault
with the system—either the AC
power is disconnected, the backup
battery is dead, or the SERVICE
indicator is flashing. Correct the
problem as soon as possible.
49-351.fm Page 12 Wednesday, August 18, 1999 4:37 PM

13
• If you armed the system for instant
alert, you must disarm the system
from a phone you can reach with-
out setting off the alarm.
• If the entry delay has elapsed, you
must wait for the system to contact
ORCA Monitoring Services and
begin sounding the siren before
you can disarm the system.
REMOTE ARM/DISARM
You can arm and disarm your system
by calling your home. If you have an an-
swering machine, wait for the answer-
ing machine to answer, then enter the
arm or disarm code (1-800-YOUR PIN
+ A (2) to arm with an entry delay, I (4)
to arm for instant alert, or D (3) to dis-
arm). The system sounds one tone to
verify arming, two tones to verify dis-
arming, or three tones if there is a prob-
lem.
If you do not have an answering ma-
chine, ORCA Monitoring Services can
have your system answer the phone af-
ter a specified number (the preferred
setting is 8 rings). Enter the arm or dis-
arm sequence when ringing stops.
Notes: Remote arming and disarming
does not work if you have voice mail,
call forwarding, another telephone ser-
vice that routes unanswered calls to an-
other number, or an answering machine
that holds the line for more than 60 sec-
onds after you hang up, and might not
work with all remote-controlled answer-
ing machines.
ALARM CONDITIONS
When the system detects a violation, it
calls ORCA Monitoring Services then
starts a 5-minute alert siren. ORCA
Monitoring Services first calls your
home to try to confirm the alarm. If no
one answers, or if the person who an-
swers does not know your password,
ORCA Monitoring Services notifies the
police and also tries to contact at least
one person you listed on your monitor-
ing service agreement.
After 5 minutes, the system stops
sounding the siren and rearms. The
next time you disarm the system, it
sounds three tones to let you know that
the system was violated.
Note: If your system has repeated false
alarms, ORCA Monitoring Services
might temporarily disarm your system
until the problem is resolved.
CLEARING THE SERVICE
INDICATOR
After you start service with ORCA Mon-
itoring Services, the yellow indicator
flashes when ORCA Monitoring Servic-
es needs to contact you. If the SER-
VICE indicator flashes, call 1-800-FOR-
ORCA to find out how to clear the indi-
cator. The system still functions as a
stand alone alarm when the indicator is
flashing, but it does not call ORCA Mon-
itoring Services during an alert.
49-351.fm Page 13 Wednesday, August 18, 1999 4:37 PM

14
UNDERSTANDING SYSTEM INDICATORS
Your system has three indicators and five alert tone patterns. The following tables
describe each.
Indicator On Off Flashing
Service (Yellow) N/A All Ok. Call ORCA Monitor-
in
g
Services.
Power (Green) Power OK. No power. Battery problem.
Armed (Red) System armed. System disarmed. System disarmed,
motion detected.
Beep Pattern Meaning
One beep
You armed the system.
The entry delay warnin
g
beeps are disabled, and the system
started the entry delay.
Two beeps You disarmed the system and there were no alerts since it was last
armed.
Three steady
beeps You disarmed the system and there has been an alert since it was last armed.
Three descendin
g
beeps
You armed or disarmed the system, and there is an AC power or
backup battery problem.
You armed or disarmed the system, and the SERVICE indicator is
flashin
g
.
Continuous beeps The system is soundin
g
entry delay warnin
g
beeps or the phone
line is disconnected.
49-351.fm Page 14 Wednesday, August 18, 1999 4:37 PM

15
TESTING THE SYSTEM
There are three ways to test your sys-
tem:
• Testing Coverage
• Testing the Siren
• Testing the Monitoring Service
TESTING COVERAGE
Periodically test the coverage to be sure
your system will detect intruders. To do
this, disarm the system. Then walk
around the covered area. When the
system detects your movement, the red
ARMED indicator flashes. If the system
does not sense your movement, reread
“Installation” to be sure it is properly in-
stalled.
TESTING THE SIREN
Periodically test the siren to be sure it
will sound when triggered. To do this, lift
the handset of any phone connected to
the same line as the system. Then dial
1-800-YOUR PIN and T (8) then hang
up within 60 seconds. The system waits
for the exit delay. Then, when it detects
motion, it sounds the siren for 3 sec-
onds.
TESTING THE
MONITORING SERVICE
Periodically have the system call the
monitoring service to confirm they are
properly receiving its signals during an
alert. Before you do this, have your
password handy. First call ORCA Mon-
itoring Services at 1-800-FOR-ORCA to
let them know you are going to test the
system. Then arm the system, wait for
the exit delay to expire, and walk
through the covered area.
ORCA Monitoring Services should call
you within a few minutes of the alert.
Give them the password and advise
them again that you were testing the
system.
49-351.fm Page 15 Wednesday, August 18, 1999 4:37 PM

16
CARE AND MAINTENANCE
Your Radio Shack Central 2000 Easy Installation Monitored Motion Detector Secu-
rity System is an example of superior design and craftsmanship. Follow these guide-
lines to keep it working properly for years.
Keep the system dry. If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode electronic circuits.
Use and store the system only in normal temperature environments.
Temperature extremes can shorten the life of electronic devices and
distort or melt plastic parts.
Handle the system gently and carefully. Dropping it can damage cir-
cuit boards and cases and can cause the system to work improperly.
Keep the system away from dust and dirt, which can cause prema-
ture wear of parts.
Use only a fresh 9V alkaline battery in the system. An old or weak
battery can leak chemicals that could damage electronic circuits.
Wipe the system with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong deter-
gents to clean your system.
Modifying or tampering with the sytem’s internal components can cause a malfunc-
tion and invalidate your sytem’s warranty and void your FCC authorization to oper-
ate it. If your system is not performing as it should, take it to your local Radio Shack
store or contact ORCA Monitoring Services at 1-800-FOR-ORCA for assistance. If
the trouble is harming the phone lines, the telephone company might ask you to dis-
connect the system until you resolve the problem.
CLEANER
49-351.fm Page 16 Wednesday, August 18, 1999 4:37 PM

17
THE FCC WANTS YOU TO
KNOW
In the unlikely event that your system
causes problems on the phone line, the
phone company can disconnect your
service. The phone company attempts
to notify you in advance. If advance no-
tice is not practical, the phone company
notifies you of your right to file a com-
plaint with the FCC.
Also, the phone company can make
changes to its lines, equipment, opera-
tions, or procedures that could affect
the operation of your system. The
phone company notifies you in ad-
vance, so you can take steps to prevent
interruption of your phone service.
LIGHTNING
Your system has built-in protection cir-
cuits to reduce the risk of damage from
surges in phone and power line current.
These protection circuits meet or ex-
ceed FCC requirements. However,
lightning striking the phone or power
lines can damage your system.
Lightning damage is not common. How-
ever, if you live in an area that has fre-
quent electrical storms, we suggest that
you unplug your system during storms
to reduce the possibility of damage.
49-351.fm Page 17 Wednesday, August 18, 1999 4:37 PM

18
TROUBLESHOOTING
We do not expect you to have any problems with your system. However, if you do,
try the suggestions in this section first. If you still cannot solve the problem, call 1-
800-FOR-ORCA or contact any Radio Shack store for assistance.
Frequent False Alarms
• Always disarm the system as soon as you get home.
• Do not let children arm and disarm the system.
• If you are not sure whether the system is armed or disarmed, disarm it.
• Be sure everyone authorized to be in your home knows both the PIN and your
password.
• Periodically test your system. See “Testing the System” on Page 15.
Three Tones When You Arm or Disarm the System
• Be sure the system is properly connected to AC power and a backup battery is
installed.
• If the yellow SERVICE indicator is flashing, call 1-800-FOR-ORCA for instruc-
tions. The system does not call ORCA Monitoring Services during an alert if the
SERVICE indicator is flashing.
Cannot Arm or Disarm the System
• Be sure you are using the correct PIN.
• Be sure the system is properly connected to the phone line and that either AC
power or the backup battery is connected (or both).
• Slow down. Even if the system is sounding the alarm, you have plenty of time
to enter the PIN.
Indicators are Flashing
• See “Understanding System Indicators” on Page 14 for a complete description
of all indicators.
49-351.fm Page 18 Wednesday, August 18, 1999 4:37 PM

19
NOTES
49-351.fm Page 19 Wednesday, August 18, 1999 4:37 PM

RADIO SHACK
A Division of Tandy Corporation
Fort Worth, Texas 76102
10A5 Printed in Hong Kong
RADIO SHACK LIMITED WARRANTY
This security product is warranted against manufacturing defects in material and work-
manship for ninety (90) days from the date of purchase from Radio Shack company
owned stores and authorized Radio Shack franchisees and dealers. Within this period
Radio Shack will repair the security product without charge for parts and labor. Simply
bring your Radio Shack sales slip as proof-of-purchase date to any Radio Shack
store.
This warranty does not cover damage or failure caused by or attributable to Acts of
God, abuse, misuse, improper or abnormal usage, faulty installation, improper mainte-
nance, lightning or other incidence of excess voltage, or any repairs other than those
provided by a Radio Shack Authorized Service Facility, or transportation costs. Radio
Shack is not responsible or liable for indirect, special, or consequential damages
arising out of or in connection with the use or performance of the product or
other damages with respect to loss of property, loss of revenues or profit, or
costs of removal, installation or reinstallation.
EXCEPT AS PROVIDED HEREIN, RADIO SHACK MAKES NO EXPRESS WARRAN-
TIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURA-
TION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states
do not allow the limitation or exclusion of incidental or consequential damages and
some states do not allow limitation or exclusion of implied warranties; therefore, the
aforesaid limitation(s) or exclusion(s) may not apply to the purchaser. There will be
charges rendered for repairs to the product made after the expiration of the aforesaid
ninety (90) day warranty period.
This warranty
g
ives you specific le
g
al ri
g
hts and you may have other ri
g
hts which vary from state to
state.
We Service What We Sell
9/94
49-351.fm Page 20 Wednesday, August 18, 1999 4:37 PM