Raidon iR2300 User manual

󾙓󹥧󷁷󳟾󱙫󴁽󲈜󾈸󱢶󾙊󳟾󱗏󹩌󾙋
󾙔󾈸󱢶󾙊󳟾󱗏󹩌󵯔󵻓󵼟󾙋
󾙕󳋼󵅗󳊈󸕓󱛔󵥌󾙔󾙕󾙒󾙒󱮇󱧾󸊥󲰬󲜳󴖹󳊬󹭰󸊥󱠍󳼎󾙓󾙋
󾙖󲍨󳸯󲖮󳟾󸖎󴁍󴖹󳊬󳎕󹥰󹂧󳸯󲁑󱱣󵥄󱽢󾙍󱗴󵽎󱝬󲰏󳟸󴁍󳸯󵅂󳸯󵯔󴖹󳊬󾙋
󾙗󴂸󶟯󶣗󱧳󸊫󱛔󵥌󱒹󱹒󳉑󵑡󵯔󵻓󵼟󾙋󱙺󲜿󴅞󸅳󵙃󳎣󴁍󲜳󵯔󳵿󶾩󾙍󳟹󱟀󳋼󵅗󳊈󸕓󱛔󵥌󵲉󱹒󳉑󵑡󲏵󷮾
󵯔󵻓󵼟󾙋
󾙘󲰉󸀌󵻓󵼟󱮇󸏤󱧾󵽎󸍣󳡇󱛔󵥌󵯔󵻓󵼟󱓟󵇾󲘢󸪍󳟾󳼎󱩎󱗟󲀷󹯎󾙍󱗴󱨇󲴘󷆼󶟯󶣗󳬨󴢹󳟾󸝕󳸄󸸉󲚫󾙋
󾙙󵻓󵼟󴉓󳊬󱳎󳎕󾙍󾙔󾙕󾙒󾙒󵯔󶪎󱛔󵥌󱧗󲮨󲱬󹂩󳟾󸊫󴁮󷇤󵻓󵼟󲱬󹂩󱰗󶪎󳎕󵯔󴁹󳡇󱒹󱹒󾙋
󾙚󳋼󵅗󳊈󸕓󹠾󱕞󱛔󵥌󾙔󾙕󾙒󾙒󵯔󸝕󳸄󱧗󲮨󱰖󶾩󲙼󾙍󸏤󹃂󲴕󹂧󸅳󸝕󳸄󱢶󱘙󱭞󱸢一󱞶󱧗󲮨󸀌󶱭󱒶󳟾
󸶿󶎙󱢶󱘙󾙍󹤢󹂧󱢶󳬅󳕝󹂧󸅳󵯔󸝕󳸄󾙋󷏖󳕝󱧗󲮨󲍨󾙔󾙕󾙒󾙒󵯔󸝕󳸄󳬨󴢹󳟾󸸉󲚫󾙍󲴌󱒹󸜘󱘕󱚑󵯔
󸜫 󱘕󾙋
󵥄󱽢󱛔󵥌󴪒󳘍󱕥󹭢
銳銨科技
V1.0(DEC. 2021)
RAIDON󵅂銳銨科技股份有限公司󳹾󱒷󱽢󵑡󱔐󱒪
󳘬󸒡󳕝󱛔󵥌銳銨科技股份有限公司󵯔󵥄󱽢󾙋
󴂸󳡧󱩩󸀖󵯔󸝕󸉜󲍨󱬕󵑙󱮇󹤚󵈨󳂷󶤛󷾩󸌭󶡙󵽎󸍣󾙍󱙺󲳉󹢣󵥄󱽢󸆉󴉓󲴌󳂷󱬕󸜤󳼩󵅂󴴸󽙢󱘕󱚑󵯔󵥄󱽢
󸆉󴉓󳟾󵲉󹞐󸝕󸉜󴁍󳸯󾙍󸏤󳕝󵲃󳩻󱒶 www.RAIDON.com.tw󶥢󶍨󴇉󸌋󾙍󳟾󵲃󳩻󷇤󳕝󵯔󴑧󱱪󶺅󶢺
󶋍󱸟󶺅󶫵󾙍󴂸󱨿󱸻󲴌󱒹󱸢󷼇󸴂󵸔󾙋
󲜿󴅞󳕝󲴕󹉐󹈽󶅎󳢸󵯔󵥄󱽢󴁹󱘕󱚑󵧰󲀷󾙍󳟾󳼎󳗗󵙃󳎣󾍐󳸯󵥄󱽢󸉜󳓽󾙊󱛔󵥌󳡧󱩩󳟾󹫼󺁪󾙍󸏤󳕝󶺅󶢺
[email protected]󾙍󳟹󱟀󲴌󱦦󸴐󲋲󸅻󳕝󾙋
󴂸󸎢󳻛󵲉󹞐󵥄󱽢󱨱󲱬󴠟銳銨科技股份有限公司󵑙󴝘󳡇󴁹
󾙔󾙕󾙒󾙒󳐯󸴐󲰉󸀌󲴘󳊷
󵥄󱽢󶀲󳘍󲍍󷇤󸾇󱘎󷼲
󱮇󸆓󲍍
󾙕󾙗󾛓󵻓󵼟󳤊󱸇󵱍󳣈󳡧
A
󾙔󾙗󾛓󵻓󵼟󳤊󱸇󵱍󳣈󳡧
B
󾙕󾙗󾛓󵻓󵼟󱵐󴓙󳥿󹏘
B
󾙔󾙗󾛓󵻓󵼟󱵐󴓙󳥿󹏘
C
󳶨󵌥󹱉󳡙
F
󸴠󶢗󲑬

󸴠󶢗󲑬

󹱉󳡙󸴠󳩻󲑬

󶼾󸆓󲍍
󹨺󹭁󴖹󳊬󱬫󳫘
D
D
E
AFH
I
C
E
G
B
H
󸏤󱧾󵽎󸍣󵲉󹞐󸾇󱘎󷇤󵥄󱽢󴂸󸩑󳼎󱹷󴁹󱸉󳬨󳟾󳼎󶰎󲴞󸾇󱘎󾙍󷏖󴁹󱘕󱚑󵧰󲀷󾙍󸏤󷇤󳕝󵯔󶤛
󹉙󲀫󳟾󴑧󱱪󱖶󱾇󶺅󶢺󾙋
󸏤󱮇󳎃󲰨󶥢󱒷󸫝󸎢󳻛󴁕󾙊󹽥󱱣󾐍󳊬󱗴󱷸󱩎󹵁󵲉󹞐󸝕󴴰󾙋


󳡳󹜈󱲯󸀌󲙼󵱍󳎕󾙍󱲯󸀌󱨱󲱬󱲯󱺃󱒷󱬼󶡿󱘎󽙡
󾙔󾙕󾙒󾙒󱓻󺁪󾙓 󳐯󸴐󲰉󸀌󲴘󳊷󾙓 󷷹󶣙󱷸󹗕󱳕
󵥄󱽢󸾇󱘎󷼲
󱨱󳩻󸴠󳩻󶦹󾙔
󸏤󱷪󵊉󱗴󱒷󴠁󹾘󲰏󳟸󵻓󺁪󲰉󸀌
Lock Unlock Press
󾙓󾙕󾙗󱹑󵻓󵼟󳤊󵱍󵯔󸻉󱘙󾙍󸏤󱛔󵥌󹥝󱘎󱲯
󱨱󹠎󵯔󹗕󱳕󸈏󹐙
󱵐󴓙󳥿󹏘 󾙍󱩬 󲴌 󳥿󱒷
󱵐󴓙󳥿󹏘
󾙍󵻓󵼟󳤊󱸇󵱍󳣈󳡧󱜹󴁮󳌛󹜈󾙍
󱵫󱸯󱸇󱬕󳤊󱸇󵱍󾙋
󾙔󲰉󸀌󾙕󾙗󱹑󵻓󵼟󾙍󸏤󱛔󵥌󾙘󹯅󹥝󱘎󱲯󱨱
󹠎󵯔󲚜󹯅󷷹󶣙󱰗󱗴󲌟󲰬󽙢󲰉󸀌󾙔󾙗󱹑󵻓
󵼟󾙍󸏤󱛔󵥌󾙖󹯅󹥝󱘎󱲯󱨱󹠎󵯔󲴙󹯅󷷹
󶣙󱰗󱗴󲌟󲰬󾙋
Lock Unlock
󾙕 󾙔󾙗󱹑󵻓󵼟󳤊󵱍󵯔󸻉󱘙󾙍󸏤󱛔󵥌󹥝󱘎
󱲯󱨱󹠎󵯔󹗕󱳕󸈏󹐙󵻓󵼟󳤊󱸇󵱍󹐙󾙍󲴌
󹭝󱬕󳥿󹏘󱹙󱸴󳪁󶆐󾙍󵻓󵼟󳤊󱸇󵱍󳣈󳡧
󱜹󴁮󳌛󹜈󾙍󱵫󱸯󱸇󱬕󳤊󱸇󵱍󾙋
󾙖󲰉󸀌󾙔󾙗󱹑󵻓󵼟󾙍󸏤󱛔󵥌󾙖󹯅󹥝󱘎󱲯
󱨱󹠎󵯔󲴙󹯅󷷹󶣙󱰗󱗴󲌟󲰬󾙋
󾙗󲴌󵻓󵼟󲰉󸀌󱭞󳤊󱸇󵱍󱒶󾙍󲴌󳤊󱸇󵱍󳵳󱨭
󱓻󴘣󱨱󱓟󹞐󱒶󳣈󳡧󾙋
󾙘󸴠󳩻󸴠󳩻󶦹󷇤󹥧󴴰󶦹󾙋󱷪󵊉󱗴󱒷󲍍


󾙖󾙗󸴠󳩻󶦹
󹥧󴴰󸴠󳩻󶦹
󹥧󴴰
󱓻󴘣󵑙
󸴠󳩻󲑬
󾙔󾙕󾙒󾙒
󱨱󳩻󱓻󴘣󴢰󶀲󳘍󲍍
󾙓
󾙓
󾙕
󾙕
󸴠󳩻󲑬
󾙔


󾙖󾙗󸴠󳩻󶦹
󾙔
󾙙󵻓󺁪󲰉󸀌󲰏󳟸󾙋󳕝󱸯󹜈󲁑󹥧󴴰󸵂󷼇󵲉󹞐󸊥󲰬󷇤󳝶󵥌󾙋
󾙚󱚤󵯔󱚝󴑧󶟯󶣗󲴌󴁮󷆦󷼇󸯤󸔣󵻓󺁪󾙍󸯤󸔣󳟸󱰖󳎕󸏤󱧾󲰏󳟸󵻓󵼟󴉓󳊬󱳎󾙍󲰏󳟸󳎕󱵫󱸯󱛔󵥌󾙋

󴖹󳊬󱬫󳫘󸊥󲰬
󱬫󳫘󸊥󲰬
󴪒󳘍󸅳󱬫󳫘󳼩󹥰󱧾󱬫󳫘󷆹󳡪󶾩󸵂󷼇󱬫󳫘
󱬫󳫘󹥧󴴰󹥰󹞐󹜆󱩬󵥌󹭝󹃂󲘋󱚊󳥿󹏘󱩬󹜈󲁑󹥧󴴰󳎊󲘋󱚊󶟾
󱕲󶅐󳼩󴁮󶺦󱭞󴁮󴁹󱒪󶺏󱓇󹜀󵏬󱵫󵅂󸊥󲰬󲰏󳟸󱵫󱸯󳵳󹜈󹭝󹃂

󶠀󵍙󳒶󱖠 󶠀󵍙󳒶󱖠
󷩜󶡏󵍙󹜀󵏬

󾙔󾙕󾙒󾙒
Package Contents and Product Views
iR2300 X1(with removable drive tray enclosed x 3)
SATA Cable 󽚟2
Quick Setup Guide x 1
Screws and keys
Open the package and you should find the following:
1. Computers or servers with SATA I & SATA II & SATA III.
2. Hard drive with SATA I & SATA II & SATA III.
3. You are strongly advised to set the storage mode (the default is the Independent mode) before using the
iR2300.
4. The product needs to be restarted after adding or changing the RAID mode, and the update is
guaranteed to be the new RAID mode.
5. The product allows the user to simultaneously utilize two hard drives manu factured by different
companies. However, if the user expects better efficiency, we strongly recommend the users to use hard
drives manufactured by the same manufacturer.
6. Please make sure that the two hard drives are free from bad blocks or defects prior to installation in
order to avoid system crashes or data loss.
7. The actual storage capacity of iR2300 recognized by the system may differ from the total capacity
stated on the hard drives combined once the drives have been formatted.
8. It is highly recommended for users to back up important data contained within the iR2300 on a
regular basis or whenever the user feels necessary to a remote or a separate storage device. Stardom will
not be responsible for any lost of data caused during the use of the unit or the recovery of the data lost.
Hardware Requirements and Precautions
Hardware Installation
Please check the product and accessories for any defect or missing parts. If you have
any questions, please contact your product supplier.
Please visit the official website (www.raidon.com.tw) to download user manuals, drivers
and other related resources.


Raidon
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.RAIDON.com.tw or through your sales representative. No separate notications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
instruction manuals, or rmware, please contact S[email protected] for assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
Please follow the instructions below to complete the hardware installation.
1.
Lock Unlock Press
For the 3.5" HDD tray, please use
the key included in the accessory
kit to unlock the HDD tray key lock,
and then press the HDD tray key
lock. The removable drive tray will
pop open and extract the
removable drive tray.
2. For 3.5" HDD/SSD, please secure
it by use six the larger screws
included in the accessory kit. For
2.5" HDD/SSD, please secure it
by use four the smaller screws
included in the accessory kit.
For the 2.5" HDD tray, please use
the key included in the accessory
kit to unlock the 2.5" HDD tray key
lock and push the HDD eject
button to the right, the 2.5" HDD
tray handle will pop up to remove
the tray. 󾙔󾙗

󾙖

Properly connect SATA cable and power cable from your system to the device.
Power on your system after hardware installation is completed, and your operating
system will automatically detect the hard drives from booting. Then follow the steps
from your operating system to partition and format the drives when necessary,
device will be ready to use once the format is completed.
6.
V1.0(DEC. 2021)
Front view Rear view
D
AFH
I
C
E
G
B
H
3.5”HDD/SSD Tray & Tray Handle
A
2.5”HDD/SSD Tray & Tray Handle
3.5”Tray Key Lock & Push Open Button
B
Mute & RAID Switch
C
D
E2.5”Tray Key Lock & Push Open Button
Cooling Fan
F
Cooling Fan Port
SATA Port
G
RAID SATA Port
H
I
Lock Unlock


󾙖󾙗




󾙔󾙕󾙒󾙒
Internal Case
󾙓
󾙓
󾙕
󾙕

󾙔


󾙖󾙗
󾙔
LED Instruction
RAID Mode 
Buzzer 
3.
5.
When the HDD/SSD installation
has been completed, insert the
hard drive tray into the system
horizontally and secure the latch
into place.
4.
1. If you want to change the RAID mode, change to JBOD mode first then change to the RAID
mode you want to use.
2.How to change the RAID mode:
Turn the power off and then press the RESET button when power on. After about 5 seconds,
when the Buzzer beeps and the HDD LED flash, you can release the button and the RAID
mode changed complete.
Red light always on Red light always on