Raidon iR2970 User manual

HDD1
HDD0
Hardware or GUI Mode 開關
󵧈󵻓󵼟󹐙󱚅󳹆󱸴󸸶󳼩󾙍󵻓󵼟󳤊󱸇󵱍󲴌󷮫󳹆󹐙󱚊󵔜󳙿󾙍󴟿󳼩󸏤󱲦󳥿󲘋󹭝󱬕󹏘󱗴󸸗󱨇󳤊󱸇󵱍󱷸
󵻓󵼟󳡇󱸉󱭞󳬨󱣰󾙋
󾙔󾙛󾙙󾙒󳐯󸴐󲰉󸀌󲴘󳊷
󸏤󱧾󵽎󸍣󵲉󹞐󸾇󱘎󷇤󵥄󱽢󴂸󸩑󳼎󱹷󴁹󱸉󳬨󳟾󳼎󶰎󲴞󸾇󱘎󾙍󷏖󴁹󱘕󱚑󵧰󲀷󾙍󸏤󷇤
󳕝󵯔󶤛󹉙󲀫󳟾󴑧󱱪󱖶󱾇󶺅󶢺󾙋
󸏤󱮇󳎃󲰨󶥢󱒷󸫝󸎢󳻛󴁕󾙊󹽥󱱣󾐍󳊬󱗴󱷸󱩎󹵁󵲉󹞐󸝕󴴰


󳡳󹜈󱲯󸀌󲙼󵱍󳎕󾙍󱲯󸀌󱨱󲱬󳝶󱲯󱺃󱒷󱬼󶡿󱘎󽙡
銳銨科技
󳸄󷮾󽙡󾙓󾙕󾙒󾙓󾙒󾙓󾙒󾙖
󱽢󱹓󾙔󾙛󾙙󾙒󳐯󸴐󲰉󸀌󲴘󳊷
󵑙󴂸󾙓󾙒
󴃮󸞎󹇺󵑙󶠬󾙓󾙗󾙒󵽟󱴨󲮦󳯷󷏱󳷥󴂝󲙼
󲵚󲳲󾙔󾙓󾙒󾙔󾙛󾙙󾙖
󵅂󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󳹾󱒷󱽢󵑡󱔐󱒪
󳘬󸒡󳕝󱛔󵥌󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󵯔󵥄󱽢󾙋
󴂸󳡧󱩩󸀖󵯔󸝕󸉜󲍨󱬕󵑙󱮇󹤚󵈨󳂷󶤛󷾩󸌭󶡙󵽎󸍣󾙍󱙺󲳉󹢣󵥄󱽢󸆉󴉓󲴌󳂷󱬕󸜤󳼩󵅂󴴸󽙢󱘕󱚑
󵯔󵥄󱽢󸆉󴉓󳟾󵲉󹞐󸝕󸉜󴁍󳸯󾙍󸏤󳕝󵲃󳩻󱒶 www.RAIDON.com.tw󶥢󶍨󴇉󸌋󾙍󳟾󵲃󳩻󷇤
󳕝󵯔󴑧󱱪󶺅󶢺󶋍󱸟󶺅󶫵󾙍󴂸󱨿󱸻󲴌󱒹󱸢󷼇󸴂󵸔󾙋
󲜿󴅞󳕝󲴕󹉐󹈽󶅎󳢸󵯔󵥄󱽢󴁹󱘕󱚑󵧰󲀷󾙍󳟾󳼎󳗗󵙃󳎣󾍐󳸯󵥄󱽢󸉜󳓽󾙊󱛔󵥌󳡧󱩩󳟾󹫼󺁪󾙍󸏤
󳕝󶺅󶢺[email protected]󾙍󳟹󱟀󲴌󱦦󸴐󲋲󸅻󳕝󾙋
󴂸󸎢󳻛󵲉󹞐󵥄󱽢󱨱󲱬󴠟󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󵑙󴝘󳡇󴁹
V1.0 (APR. 2023)
IR2970
狀 態 硬碟狀態燈 蜂鳴器
硬碟閒置 藍燈恆亮 N/A
資料存取 紫燈閃爍 N/A
無硬碟/硬碟故障 紅燈恆亮 鳴叫
資料重建- 來源碟 藍燈恆亮 N/A
資料重建- 目標碟 紅燈閃爍 N/A
對 應
LED A HDD 1
LED B HDD 0
󲍨󵔜󳙿󱒷󲜿󱸧󴁹󱒪󹯅󷩜󷋩󵍙󷮾󴁮󳼩󶠀󷋩󵍙󷮾
󴁮󹜀󵏬
󴖹󳊬 󴖹󳊬
󴖹󳊬󱬫󳫘󸊥󲰬
󴖹󳊬 󱬫󳫘󸊥󲰬
󾙓󸏤󱛔󵥌󶼾󴄯󱒶󵯔󳩿󱭧󹏘󱛠󸸂󳲃󴖹󳊬󾙍󱶫󳉑󹭰󸊥󱠍󵅂󾙓󴖹󳊬󾙋
󱸢󱛔󵥌󹜈󹞐󱛠
󱬫󳫘󸊥󲰬󾙍 󱶫󳉑󹭰󸊥󱠍󵅂󴖹 󳊬󾙋
󾙔󲴌󱓻󺁪󸀌󶱭󲍨󴘣󴢰󱒶󾙍󸴠󳩻󵲉󹞐󸴠󳩻󶦹󾙍󱓟󵽎󸍣󲌟󲰬󷷹󶣙󳼎󱹷󹐙󱒶󾙋
󸏤󱛔󵥌󹥝󱘎󱲯󱓩󵯔󷷹󶣙
󷷹󶣙󲮠󱚅󸎢󳻛
󾙕󱸇󱬕󳤊󱸇󵱍󾙍󲴌󱝬󸕡󳤊󱸇󵱍󵥌󵯔󱨱󶱭󲔨󷃽󱠟󵻓󵼟󱸇󱬕󾙋󲔨󷃽󱠟󵻓󵼟󱓻󸅳󳼎󱝬󸕡󲴪
󴂵󸀌󱒶󵻓󵼟󵯔󳤊󱸇󵱍󾙍󱒪󳺞󳤊󱸇󵱍󸀌󱒶󱕞󵻓󵼟󾙍󲔨󷃽󱠟󵻓󵼟󱵫󲚫󱷝󱚝󵥌󾙋
󾙖󲴌󳕝󵯔󵻓󵼟󲰉󸀌󷆹󳤊󱸇󵱍󱒶󾙍󱓟󵽎󸍣󵻓󵼟󲌟󲰬󷷹󶣙󳼎󱹷󹐙󱒶󾙍󱗴󱨇󱒹󳏳󸅳󵯔󶆐󱱣󲴕󵻓󵼟
󸴔󳟸󳬨󱣰󾙋󸏤󱛔󵥌󹥝󱘎󱲯󱓩󵯔󾙕󾙖󷷹󶣙󾙋
󾙗󵽎󸍣󲰏󳟸󳎕󸏤󳫆󲋲󳤊󱸇󵱍󾙍󱓟󵽎󸍣󳤊󱸇󵱍󵽎󲳉󳫆󱨭󱓇󲌟󲰬󲍨󸷙󵧈󵯔󱚅󶱭󾙋
󾙘󵻓󺁪󲰉󸀌󲰏󳟸󾙋󳕝󱸯󹜈󲁑󹥧󴴰󸵂󷼇󵲉󹞐󸊥󲰬󷇤󳝶󵥌󾙋
󾙙󱚤󵯔󱚝󴑧󶟯󶣗󲴌󴁮󷆦󷼇󸯤󸔣󵻓󺁪󾙍󸯤󸔣󳟸󱰖󳎕󸏤󱧾󲰏󳟸󵻓󵼟󴉓󳊬󱳎󾙍󲰏󳟸󳎕󱵫󱸯󱛔󵥌󾙋
5
󾙓󱒷󾙍󹥰󸅳󱹒󳼩󸀌󱨭󱨵󹯅󵻓󵼟
󾙓󱒷󾙍󱭅󴞂󱛔󵥌󴁮󷆦󱱣󱧾󸵂󷼇󸝕󳸄󹂧󳊈󱒪󴞂󾙒󾙓

Product Diagrams and Contents of Product Package
Precautions Before Application
After you open the outer package, make sure that the following items are contained
in the package:
Please check the product and accessories for any defect or missing parts. If you have
any questions, please contact your product supplier.
Please visit the official website (www.raidon.com.tw) to download user manuals, drivers
and other related resources.


󾙔󾙛󾙙󾙒 Quick Guide 
Hardware Installation
Raidon
LED Instruction
Contents of Product Package
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.RAIDON.com.tw or through your sales representative. No separate notications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
instruction manuals, or rmware, please contact S[email protected] for assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
V1.0 (APR. 2023)
HDD1
HDD0
Hardware or GUI Mode Switch
RAID Switch
SATA 7 + 15 Pin
Power Connector
󾙔󾙛󾙙󾙒
Status HDD Status Light Buzzer
HDD Idle Blue light always on N/A
Data access N/A
No hard drive / hard drive failure Red light always on ON
Rebuilding - Source N/A
Rebuilding - Target N/ARed light flashing
Purple light flashing
Blue light always on
Corresponding LED to HDD Position
LED A HDD 1
LED B HDD 0
1. Please use the RAID control keys on the backplane to select the RAID mode,
the factory default is RAID 1 mode.
Also use the Hardware or GUI switch to switch settings, the factory default
is Hardware mode.
Hardware Mode GUI Mode
RAID Mode setting
Hardware or GUI Mode setting
2.
3.
4.
5.
5
6
7

󽘁
󾙓
󾙓󽘀󾙒󾙓