
Product Diagrams and Contents of Product Package
Precautions Before Application
Please install iT2775 &iT2776 & iT2777 as the following instruction.
Hardware Installation
Install the product unit into the comput er chassis and make the necessary
connections and mount the product unit properly and securely to the bay position
desired.
1.
Push the HDD tray ejection to the right and the removable drive tray will pop open
to remove the removable tray.
For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the
accessory kit. and re-insert the removable tray when completed.
2.
3.
When hardware installation is completed, you can turn on the power of the main
unit to proceed with relevant settings and applications.
Installation completed. Your operating system should automatically detect the hard
drives within. Please proceed to format the drives. Once formatting is completed,
you may then start to operate the device.
4.
5.
We strongly recommend you to keep an extra copy at your important personal data
other than stored in your iT2775 &iT2776 & iT2777 product. RAIDON will not be
responsible of your data loss problem.
1.
Raidon
iT2775 & iT2776 & iT2777 Quick Installation Guide
LED Instruction
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specifications may have changed before shipping; Latest product specifications and updates can be
found at www.RAIDON.com.tw or through your sales representative. No separate notifications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product
assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
V1.0 (Nov. 2022)
When Using SATA Hard Drives
Note1: While using a different SSD Hard Drives, the LED Indication might be
with a different light set.
Note2: If the SSD is supported, the LED has a flashing function during data
access; if there is no support, there is no flashing function.
HDD idle Blue light always on
Data access Blue light flashing
No HDD Blue light always on
HDD Status LightStatus
Screw positions to
mount like a
3.5" hard drive
Screw positions to mount
like a floppy drive
After you open the outer package, make sure that the following items are
contained in the package:
Please check the product and accessories for any defect or missing parts. If you
have any questions, please contact your product supplier.
Please visit the official website (www.raidon.com.tw) to download user manuals,
drivers and other related resources.
˙
˙
A
B
C
D
E
F
A
C
DE
F
B
HDD 1
HDD 2
HDD1
HDD2
A
C
BD
EF
G
A
C
DE
F
B
iT2775 Front View iT2775 Rear View
iT2776 Front View
iT2776 Rear View
iT2777 Front View
HDD 1
HDD 2
LED Indicator
A
BRemovable drive tray
CHDD Tray Ejection
HDD Tray Key Lock
D
E15 Pin Power Connector
FSATA 1 Port(HDD1)
G
Quick Installation Guide x1 Screws & Ejector pins (iT2775 iT2777)
Lock Unlock
Unlock
Mounting Positions
iT2777 Rear View
LED Indicator
Removable drive tray
HDD Tray Ejection
SATA 1 Port(HDD1)
A
B
C
D
E
F
LED Indicator
Removable drive tray
HDD Tray Key Lock & HDD Tray Ejection
SATA 1 Port(HDD1)
iT2775
iT2776
iT2777
Product x 1 ( with removable drive tray enclosed x 2 )
SATA 2 Port(HDD2)
SATA 2 Port(HDD2)15 Pin Power Connector
SATA 2 Port(HDD2)15 Pin Power Connector