Ranger design 1506-GS Cargo Plus User manual

INSTALLATION GUIDE
1506-GS Cargo Plus
SAVANA RWB

PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.2 Verify all parts are present.
15-U4011 BOX
15-U1003 BOX
15-U3002 BOX
15-U2002 BOX
Side RailS
×2 ×2×2
BaR ×3
BaR ×6
RolleR ×1
RolleR SuppoRt “R” ×1 RolleR SuppoRt “l” ×1 CFK - 1 ×1 CFK - 2 ×1 CFK - 3 ×1 CFK - 4 ×1
Saddle extRuSion ×6 Foot ×6 Foot Clip ×6 Edge tRim ×6

For technical support, contact us at 1-800-565-5321 1506-GS Installation Guide |REV. A3 | Page 3
REQUIRED ITEMS
HARDWARE
2
PERSONS
( M8 ) ×1
( M8 × 65 ) ×12
13mm ×2
( M8 ) ×16 ( M8 ) ×22 ( M8 ) ×24
( M8 ) ×34
( M8 × 35 ) ×6 Bolt Cup

For technical support, contact us at 1-800-565-5321 1506-GS Installation Guide |REV. A3 | Page 4
2×
STEP 1 STEP 2
STEP 3 STEP 4
2.1.2 Connect the 3 side rails parts.
10 NM
PHASE 2 – INSTALLATION
2.1 INSTALLATION

For technical support, contact us at 1-800-565-5321 1506-GS Installation Guide |REV. A3 | Page 5
1St Side RailS
×11
×11
2nd Side RailS
2.1.1 Slide 11pcs. of channel nuts in each
side rails. 2.1.2 Attach all bars to the side rear.