Ranger design C10-B User manual

INSTALLATION GUIDE
C10-B
Partition, Contoured, E-Series

PAGE | 2
For technical support, contact us at 1-800-565-5321
C10-B Installation Guide | REV.1
SAFETY INSTRUCTIONS
Before the installation, carefully read the supplied installation guide to avoid possible injuries
and damages resulting from incorrect installation. Always keep the installation guide in an
accessible location at all times for reference during installation.
WARNING
•Only a qualified person/s should install this product.
•This product requires 2 persons to install.
•Always use safety gloves, glasses, and shoes.
CAUTION
•Follow all vehicle manufacturer instructions before attempting any installation.
•Before screwing into the vehicle, use caution to avoid wiring harnesses, fuel
tanks and battery modules.
PREPARATION
Tools Needed
Impact
½” Socket
3/8” Socket
½” Wrench
Square Bit

PAGE | 3
For technical support, contact us at 1-800-565-5321
C10-B Installation Guide | REV.1
BILL OF MATERIALS
Item No.
Description
Qty.
90-204
Bolt hx-hd gr5 5/16"-18x3/4" zinc
17
92-104
Screw HWH tpAB #14x1-1/4" zinc
9
92-174
Screw pn-hd sq-dr tpA #10x3/4" zinc
4
94-116
Nut srr-flg 5/16"-18 zinc
17
98-116
Flat washer USS 5/16" O.D. 7/8" zinc
17
Item No.
Description
Qty.
30-127
Upper panel perforated, full-size van
1
30-209
Lower panel, full-size van
1
30-340
Wing, pass side, E-Series
1
30-341
Wing, driver side, E-Series
1
30-400
Ceiling bracket
2
30-500x174
Edge Trim, 5/8" x 174" Long
1
79-932
Warning label - Bilingual, partition
1
90-3077
Fastener kit for C10-B,C12-B
1
Bill of Materials
Hardware Kit 90-3077
30-340
30-127
30-209
30-341
30-400

PAGE | 4
For technical support, contact us at 1-800-565-5321
C10-B Installation Guide | REV.1
ASSEMBLY
STEP 1
STEP 2
STEP 3
6x
Torque to
17ftlbs
Hex-hd
5/16"-18x3/4"
Flat
Washer5/16
Srr-flg nut
5/16-18
2x
Torque to
17ftlbs
Hex-hd
5/16"-18x3/4"
Flat
Washer5/16
Srr-flg nut
5/16-18
9x
Torque to
17ftlbs
Hex-hd
5/16"-18x3/4"
Flat Washer
5/16
Srr-flg nut
5/16-18
Tools:
•Impact
•½” socket
•½” wrench
Tools:
•Impact
•½” socket
30-127
30-209
30-400
30-127
½” Socket
½” Socket
Tools:
•Impact
•½” socket
½” Socket

PAGE | 5
For technical support, contact us at 1-800-565-5321
C10-B Installation Guide | REV.1
STEP 4
STEP 5
STEP 6
“You have successfully installed your C10-B, thank you for doing business with us.”
For any feedback or suggestions, you may have, please contact: [e-mail]
9x
Screw
#14x1-1/4”
4x
Pn-Hd sr-dr
#10x3/4
Tools:
•Impact
•3/8 socket
Tools:
•Impact
•Square driver
3/8” Socket
Square Bit
30-500x174