Ranger design 5045 User manual

INSTALLATION GUIDE
5045 Cab box
For virtual Install Guide, scan the QR code or visit:
https://rangerdesign.com/products/lockable-van-
cab-storage-box-18x12x16/

REQUIRED ITEMS
1 PERSON
 1.1 Setup............................................................................................................................................... 3
QUICK START GUIDE
Phase 1 - Assembly
Phase 2 - Installation
2.1 Regular Install.................................................................................................................................4
Cordless Impact
Tape Measure
3/8" Socket
SAFETY INSTRUCTIONS
WARNING
•Before the installation, carefully read the supplied installation guide to avoid possible injuries and dam-
ages resulting from incorrect installation. Always keep the installation guide in an accessible location at
all times for reference during installation.
•Installers must always wear appropriate safety gear during installation. This may include but is not limit-
ed to gloves, steel toed shoes, and safety glasses.
CAUTION
•Follow all vehicle manufacturer instructions before attempting any installation.
•To prevent rust and other damages, do not drill into the factory floor panels.
•Before drilling for the tapping inserts, use a drill stop collar to prevent accidental drilling the van met-
al floor panel which may result in damage to components underneath, such as wiring harnesses, fuel
tanks and battery modules.
For technical support, contact us at 1-800-565-5321 5040 Installation Guide | REV. D1 | Page 2

For technical support, contact us at 1-800-565-5321
5040 Installation Guide | REV. D1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
Item No. Description Qty.
5045Cab box 1
96-5007 Install Fastener KIt 1
bILL oF MaTERIaL
1.1.1 Unpack components; compare with the bill of materials.

For technical support, contact us at 1-800-565-5321
5040 Installation Guide | REV. D1 | Page 4
HARDWARE USED
4×
TOOLS
qCordless Impact
q3/8" Driver Bit
#92-100 Screw #14 × 3/4"
PHASE 2 – INSTALL
2.1 NO 5041 INSTALL
2.1.1 Place and screw your 5045 cab box on a flat surface.
“You have successfully installed your Cab Box
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: [e-mail]