Raymarine ST40 Wind User manual

Adjusting display backlighting/contrast
Normal operation
ST40 Wind Instrument - quick reference guide
orTo exit adjust mode press or wait for 5 second timeout
LEVEL 1 LEVEL 1 OFF LEVEL 2LEVEL 3LEVEL 2
To enter adjust mode, press for 1 second to adjust BACKLIGHTING and a further 1 second to adjust CONTRAST
SWITCH ON
Apparent
wind
True
wind
3 seconds
Set
alarm
level
Alarm on/off
Only available on master
instruments. Times out to
the previous permanent
screen after 5 seconds.
High
wind speed
alarm
Locked
apparent
wind
Auto locked
apparent
wind
Available only if boat
speed information is
present on SeaTalk
Course computer
sets vane lock
Course computer
sets vane lock
+
-
Momentary
With Set alarm level screen displayed,
to save the alarm level and return to
normal operation.
and keys simultaneously
press the
86049_2.p65 18/04/01, 16:441

Calibration
ST40 Wind Instrument - quick reference guide
Document number: 86049_2 (to be used with handbook: 81160_3)
Date: 1 May 2001
INTERMEDIATE CALIBRATION
Software
version
Hold down
and
for 4 seconds
M/S
KTS
Instrument
status
Linearise
transducer
Align
transducer
Linearisation
successful
2 turns
minimum
Repeater
Master
Bypass
linearisation
Start
+
-
+
-
USER CALIBRATION
for 2 seconds
Hold down
and
Set wind
angle
response
Set wind
speed
response
Set wind
speed units
To leave any calibration routine
and return to normal operation,
for approximately 2 seconds
andhold down
User
cal
If there is no key activity with either
the User cal or Software version
screen displayed, calibration will time
out to normal operation after 5 seconds
86049_2.p65 18/04/01, 16:452