Raymarine ST60+ SPEED INSTRUMENT User manual

Crop
Crop
Crop
Crop
Crop
Crop
Crop
Crop
Fold
Fold
Fold
Fold
Document number: 86116-1 Date: December 2005
Raymarine Ltd, Quay Point, Northarbour Road, Portsmouth, Hampshire PO6 3TD, UK [phone]
Raymarine, Inc, 21 Manchester Street, Merrimack, NH 03054, USA Toll Free: 800-539-5539
[phone]
Quick Start Guide
Switch off & on
Switch off
OFF
ON
COUNTDOWN (3 - 2 - 1 - 0)
PWR OFF
D8331-1
(approx. 8 seconds)
Hold
down
until instrument switches off
DEPTH
Switch on
D8330-1
OFF ON
Hold down
1 second
DEPTH
Note:
When power is first applied, the instrument powers up in the ON
condition. You do not need to use the DEPTH button to switch it on.
ST60+ Depth
Instrument
1 second
Times out to normal operation after 7 seconds
Adjust
backlighting Hold down
D8332-1
DEPTH
DEPTH
DEPTHDEPTH
DEPTH DEPTH
DEPTH
Times out to
normal operation
after 7 seconds
Adjust
contrast 2 seconds
Hold down
D8333-1
DEPTH
DEPTH
DEPTH
DEPTH
DEPTH
ST60+DEPTH
D8334-1
OFFSET RESET ALARM
DEPTH
Adjust backlighting & contrast

Crop
Crop
Crop
Crop
Crop
Crop
Crop
Crop
Fold
Fold
Fold
Fold
+
When resettable data are
displayed, hold down for 3
seconds to reset the displayed
data to the current value.
RESET
OFFSET
Gives access to alarm
levels and alarm settings.
DEPTH
ALARM
Press to see the depth offset.
WATERLINE
offset
KEEL
offset
Current
depth
Minimum
depth
Maximum
depth
DEPTH
8 second timeout8 second timeout
DEPTH
Shallow alarm
Deep alarm
Shallow anchor
alarm
Deep anchor
alarm
To adjust an alarm level:
+
Select relevant
screen then press
to enter adjust mode.
or
In adjust mode, use
either
to set the alarm level
To leave adjust mode
1. 2.
+
Press
Note:
You can access alarm screens only
at master instruments.
On repeaters, the alarm button
has no effect.
3 s
Resets to
current
depth
Resets to
current
depth
3 s
Minimum depth
Maximum depth
DEPTH
D8335-1
Selects depth information.
Also gives access to
backlight adjust, contrast
adjust and power on/off
modes (see overleaf).
If incorrect offset values are applied,
this could result in misleading depth
information being displayed, with a
consequent risk of running aground.
Before using your Depth instrument,
refer to your ST60+ Depth Instrument
Owner's Handbook for information on
correctly setting the depth offset.
WARNING:
DEPTH ALARM OFFSET RESET
ALARM
ALARM
OFFSET RESET
OFFSET RESET
OFFSET RESET
RESET
RESET
General operation