RDMOTO B18S User manual

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
4
1
B18S
BMW S1000RR 2019-
Kit for Left Side
Kit for Right Side
ID
Description
Cat.No.
Pcs
ID
Description
Cat.No.
Pcs.
1
Slider adapter
317POM
1
1
Slider adapter
317POM
1
2
Screw M10x30mm
882
1
2
Screw M10x85mm
981
1
3
Safety nut M10
810
1
3
Dural. sleeve d=34mm
1333
1
4
Dural. sleeve d=24mm
1332
2
4
Bolt M6x25
877
3
5
Steel adapter
757
1
5
Bolt M4x12
876
2
6
Screw M10x80mm
853
2
7
3M Tape
2
8
Bolt M6x25
877
3
9
Bolt M4x12
876
2
1
1
2
2
3
4
5
3
4
4
5
4
66
6
7
8
9

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
4
2
Right Side:
1. Unscrew the original bolt as shown on attached picture.
2. Bolt ID.2 insert into the adapter ID.1 + ID.3. This set mounting the
place on frame.
3. Place slider and tighten it by bolts ID.4.
4. Place alu. cover into the slider use bolts ID.5.
5. Tighten using recommended tightening torque described in your
motorcycle’s manual.

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
4
3
Left Side:
1. Dismount the hood and original bolts as shown on pictures.
2. Take the ID.5 steel adapter and insert ID.6 screws.
3. From the rear adapter side, equip screws with ID.4 dural. sleeves.
4. Mount this assembly onto the bike. Use the included 3M ID.7 tape
when you feel its needed.
5. Mount the hood back.
6. Bolt ID.2 insert into the adapter ID.1.This set mounting the place on
steel adapter
7. Mount this assembly onto the steel adapter.
8. From rear side of the adapter, use ID.3 nut to secure the assembly.
6. Place slider and tighten it by bolts ID.8
7. Place alu. cover into the slider use bolts ID.9.
8. Tighten using recommended tightening torque described in your
motorcycle’s manual.
Note –For threads of all screws we recommend using medium
strenght thread glue (blue color).