RDMOTO CZECH REPUBLIC
info@rdmoto.cz
www.rdmoto.cz
3
Left Side :
1. Dismount rear motorcycle hood.
2. Dismount the original screws.
3. Prepare ID.1 steel adapter and ID.3 screws, insert the screws into
adapter and from other side, put on the ID.2 dural. sleeves.
4. Mount this assembly onto the motorcycle frame.
5. Now you can mount back the rear hood. To increase the distance
between hood and frame, use ID.6 dural. sleeve in the rear part, which
achieves support for the hood. With ID.7 screw and ID.8 washer you
can now tighten the fit.
6. Take the protector and insert ID.4 Aluminium insertion.
7. Insert ID.5 screw into the protector and from other side put on the
ID.9 sleeve.
8. Mount this aseembly into the adapter on your bike.
9. Tighten using recommended Tightening torque provided by motorcycle
manufacturer. This information is to be found in moto manual.
Note- We recommend using medium strenght thread glue during
assembly for threads of all screws (blue color).
