
RDMOTO CZECH REPUBLIC
info@rdmoto.cz
www.rdmoto.cz
2
Instr. To assembly left side :
1. Take out fairing and bolt M10 from frame.
2. Assembly together adapter ID.7. Mounting poly nuts ID.5 use bolts ID. 4. Stick 3M
tape from back side on the adapter.
3. Put washer ID.6 on bolt ID.2. Into the frame insert dural. spacer ID.3. Place bolt into
the adapter and tighten it on motorcycl frame.
4. Put fairing back on the bike.
5. Assembly adapter ID.1 by bolt ID.9. Place washer ID.13 and tighten nut ID.12 from
back side
6. Place slider and make assembly by bolts ID.10 place cover use bolts ID.11
Instr. To assembly right side :
1. Take out fairing and bolt M10 from frame.
2. Assembly together adapter ID.7. Mounting poly nuts ID.5 use bolts ID. 4. Stick 3M
tape from back side on the adapter.
3. Put washer ID.6 on bolt ID.2. Into the frame insert dural. spacer ID.3. Place bolt into
the adapter and tighten it on motorcycl frame.
4. Put fairing back on the bike.
7. Assembly adapter ID.1 by bolt ID.9. . Place washer ID.13 and tighten nut ID.12 from
back side
5. Place slider and make assembly by bolts ID.10 place cover use bolts ID.11
We recommend to use medium strong glue on the bolt threads.