RDMOTO B18 User manual

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
1
B18
BMW S1000RR 2019-
Kit for Left Side
Kit for Right Side
ID
Description
Cat.No.
Pcs
ID
Description
Cat.No.
Pcs.
1
AL Insertion M10
X1
1
1
AL Insertion M10
X1
1
2
Screw M10x50mm
849
1
2
Screw M10x95mm
822
1
3
Dural. sleeve d=10mm
1
1
3
Dural. sleeve d=34mm
1333
1
4
Safety nut M10
810
1
5
Dural. sleeve d=24mm
1332
2
6
Steel adapter
757
1
7
Screw M10x80mm
853
2
8
3M Tape
2

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
2
Right Side:
1. Unscrew the original bolt as shown on attached picture.
2. Take the protector and put in ID.1 Al insertion.
3. Now insert ID.2 screw into this protector and from other side equip the
screw with ID.3 dural. sleeve of 34mm lenght.
4. Mount this assembly into motorcycle frame.
5. Tighten using recommended tightening torque described in your
motorcycle’s manual.

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
3
Left Side:
1. Dismount the hood and original bolts as shown on pictures.
2. Take the ID.6 steel adapter and insert ID.7 screws.
3. From the rear adapter side, equip screws with ID.5 dural. sleeves.
4. Mount this assembly onto the bike. Use the included 3M ID.8 tape
when you feel its needed.
5. Mount the hood back.
6. Take the protector and put in the ID.1 Al insertion along with ID.2
screw.
7. From rear side of the protector, put on ID.3 dural. sleeve.
8. Mount this assembly onto the steel adapter.
9. From rear side of the adapter, use ID.4 nut to secure the assembly.
Note –For threads of all screws we recommend using medium
strenght thread glue (blue color).