RDMOTO BN1 User manual

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
1
BN1
Benelli TRE-K 899 ´09- /1130 ´07-
Kit for left side: Kit for right side:
Instruction for left side:
Remove original bolt from frame. Insert to the crash protector steel box
(note 1). Into the frame insert duralumin cylinder (note 3) and by bolt (note
2) fixed. Do the finish left side and after make right side.
Instruction for right side:
Remove original bolt from frame.Insert to the crash protector steel box (note
1). In the frame lock nut (note 4) to see that the screw is rests on engine
lightly pull it (the screw is only used as a spacer to the backlash). After insert
into the frame duralumin cylinder (note 3) and screw (note 2) fixed.
Warning - the threads of the screws is recommended to use premium
glue moderately strong (blue color).
Note
Description
Cat. No.
Quant.
1
Steel box M12
X2
1
2
Bolt M12x115x1,25mm
918
1
3
Duralumin clinder
d=55mm
23
1
Note
Description
Cat. no.
Qua
nt.
1
Steel box M12
X2
1
2
Bolt M12x115x1,25mm
918
1
3
Dural. cylinder d=22m
24
1
4
Hollow bolt
489
1

RDMOTO CZECH REPUBLIC
[e-mail]
www.rdmoto.cz
2