Red Kite Feed Me Deli Manual

Instruction leaflet
IMPORTANT! KEEP FOR FUTURE REFERENCE
IMPORTANT! KEEP FOR FUTURE REFERENCEIMPORTANT! KEEP FOR FUTURE REFERENCE
IMPORTANT! KEEP FOR FUTURE REFERENCE
Read these instructions carefully before use and eep them for future reference.
Read these instructions carefully before use and eep them for future reference. Read these instructions carefully before use and eep them for future reference.
Read these instructions carefully before use and eep them for future reference.
Your child may be hurt if you do not follow the instructions.
Your child may be hurt if you do not follow the instructions. Your child may be hurt if you do not follow the instructions.
Your child may be hurt if you do not follow the instructions.
Please dispose of all pac aging material carefully.
Please dispose of all pac aging material carefully. Please dispose of all pac aging material carefully.
Please dispose of all pac aging material carefully.
Feed Me Deli
Feed Me DeliFeed Me Deli
Feed Me Deli
Suitable for babies up to a maximum weight of 15 gs.
who can sit upright and unaided.
Complies with: BS EN 14988 Parts 1 & 2 : 2006
Complies with: BS EN 14988 Parts 1 & 2 : 2006 Complies with: BS EN 14988 Parts 1 & 2 : 2006
Complies with: BS EN 14988 Parts 1 & 2 : 2006
Customer Care Line: 01454 326 568
Customer Care Line: 01454 326 568Customer Care Line: 01454 326 568
Customer Care Line: 01454 326 568

Parts List
Seat and frame assembly
Slide the top legs through the seat adjustors
from the top. Ma e sure the red buttons on the
top of the legs are facing outwards and the
numbers on the legs facing forwards.
Push the bottom legs on to top legs Fig 1a
ensuring the spring clips have come fully
through the holes Fig 1b.
Screw the two seat screws and spacers in to the
small hole below the seat height slots on the
inside of the front legs. Fig 1c.
To open and close the frame.
Squeeze the buttons on both sides of the legs
and slide the bac legs outwards. To close the
legs simply reverse this process. Fig 2.
Parts
1. Seat Unit
2. Top right leg
3. Bottom right leg
4. Top left leg
5. Bottom left leg
6. Inset tray and tray
7. Foot rest
8. 2 x seat screws
9. 2 x spacers
10. 2 x foot rest screws
Tools required for assembly
Cross head screwdriver
(Not supplied)
NOTE Carefully remove all parts from the
pac aging and lay them out in front of you.
1.
2.
3.
4. 5.
6.
7.
9.
8.
10.
Fig 1a.
Fig 1b.
Fig 1c.
Fig 2. Buttons
Red numbers
and buttons
facing out
Height adjustors

To attach the tray
Squeeze the buttons on the bottom of the tray
and slide the tray on to the seat frame. You can
choose from 3 different positions. Fig 3.
To attach the foot plate.
Slot the recesses on the foot plate on to the bar
beneath the seat unit and then pull the bottom of
the foot plate towards the front of the chair until it
loc s in place. Fig 4.
Secure the foot plate with the two remaining
screws. The screws fit into the small slots
underneath the foot plate.
Height adjustment
To select a different height, squeeze the buttons
on both sides of the height adjustment sliders
and raise up or drop down to your required
height. Release the buttons ma ing sure that the
numbers showing through the height window is
both the same. Fig 5.
Lie bac adjustment
Put your thumb on the top of the seat and your
fingers through the hole in the fabric and
squeeze together. Raise of lower the seat to
your required position. Fig 6.
Tray storage.
You can remove the tray and hang it on the
pegs on the bac legs for ease of storage.
Fig 7.
Harness usage and adjustment
To secure your child in the harness, push
the buc le prongs (A) + (B) into the buc le
housing (C) until they snap into position.
Adjust sliders to ensure a snug fit for your
child. Repeat for the other side and also
for the shoulder straps.
IMPORTANT! Always use the harness.
IMPORTANT! Always use the harness.IMPORTANT! Always use the harness.
IMPORTANT! Always use the harness.
Fig 3.
Fig 4.
Fig 5.
Fig 6.
Underside of tray
Buttons
Buttons
Lie bac adjustor
Fig 7.
1. Slot in to recess at an
angle
2. Pull the
bottom of the
foot plate
forward

SAFETY WARNINGS
SAFETY WARNINGSSAFETY WARNINGS
SAFETY WARNINGS
•WARNING: Your child’s safety is your
WARNING: Your child’s safety is your WARNING: Your child’s safety is your
WARNING: Your child’s safety is your
responsibility.
responsibility.responsibility.
responsibility.
• WARNING: Do not leave the child unattended.
•WARNING: Do not use the high chair unless all
components are correctly fitted and adjusted.
•WARNING: Be aware of the ris of open fire and
other sources of strong heat, such as
electric bar fires, gas fires etc. in the vicinity of the
highchair. Never place the highchair near these
items.
•Do not use for a child weighing more than
15 gs.
•Only suitable for children who can sit unaided.
•Always use the 5 point harness provided.
Ensure that it is correctly fitted and adjusted before
each use.
•Adult assembly required. Always ensure that the
high chair has been correctly assembled and that
all loc ing devices have engaged before placing
your child in the high chair.
•Ensure that all parts of your child’s body are clear
of the high chair when assembling, folding or
ma ing adjustments.
•Do not allow other children to play with this high
chair. It is not a toy. Store safely out of reach when
not in use.
•Never carry the high chair when the child is in it.
•Please lift your child in and out of the
highchair. Do not allow children to stand on the
footrest and seat or to climb in and out of the high
chair.
•Only use the high chair on a level floor
surface.
•Never add accessories or fittings that have not
been approved by the manufacturer.
This product complies with
This product complies with This product complies with
This product complies with
BS EN 14988 Parts 1 & 2 : 2006
BS EN 14988 Parts 1 & 2 : 2006BS EN 14988 Parts 1 & 2 : 2006
BS EN 14988 Parts 1 & 2 : 2006
For all technical queries please call:
For all technical queries please call: For all technical queries please call:
For all technical queries please call:
01454 326 568
01454 326 56801454 326 568
01454 326 568
Imported by:
Imported by:Imported by:
Imported by:
The Red Kite Baby Co Ltd
The Red Kite Baby Co LtdThe Red Kite Baby Co Ltd
The Red Kite Baby Co Ltd
35 Lavenham Road
35 Lavenham Road35 Lavenham Road
35 Lavenham Road
Beeches Industrial Estate
Beeches Industrial EstateBeeches Industrial Estate
Beeches Industrial Estate
Yate
YateYate
Yate
Bristol
BristolBristol
Bristol
BS37 5QX.
BS37 5QX.BS37 5QX.
BS37 5QX.
General care:
General care:General care:
General care:
•The correct use and maintenance of this high chair is
essential.
•Always ensure the high chair is stored in a dry place to
prevent mould or mildew developing.
• Avoid leaving your high chair in direct sunlight for
prolonged periods of time as this may cause
premature fading of colours.
Cleaning:
Cleaning:Cleaning:
Cleaning:
•Metal parts may be cleaned with a damp cloth and
wiped dry with a soft cloth.
•Clean the harness with a mild soap and water
solution. Rinse and wipe dry.
•Clean plastic parts with a mild soap and water
solution. Rinse and wipe dry.
•Do not use abrasive cleaners or bleach.
Maintenance:
Maintenance:Maintenance:
Maintenance:
•Chec that nothing is bro en, torn or missing and that
no sharp edges have been exposed. Stop using the
highchair immediately if any are found.
•Inspect all studs, nuts and screws for tightness. Chec
that all straps and harness attachment points are in
good wor ing order.
•Do not use replacement parts other than those
approved by the manufacturer or distributor.
Failure to do this may invalidate your warranty.
•See www.red itebaby.com for further terms and
conditions.