Reece 1789884 User manual

FRAMED FIXED PANEL
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade
people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range
without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at
time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
To see the complete CUSTOM GLASS range go to
www.reece.com.au/bathrooms
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty - refer to Warranty Conditions.
Please refer to detailed Cleaning Instructions on page 12.
SPECIFICATIONS
Recommended use Domestic, Hotel, and Commercial
Material Panel-6mm Low Iron Toughened Glass.
Australian Safety Standards Compliant.
Floor Suitability Tiled Floor Installation
Frame & Support Rail Colour Black
Optional Extras 1789912 - Installation Charge
1791295 - Shower Screen Removal
SIZE VARIATIONS
Code SIZE HEIGHT
1789884 900 2000
1789885 1000 2000
1789886 1100 2000
1789887 1200 2000
page 1 of 12

FRAMED FIXED PANEL
Dimensions are shown in Millimetres
Dimensions are nominal measurements only.
2000
900
page 2 of 12

FRAMED FIXED PANEL
2000
1000
page 3 of 12

FRAMED FIXED PANEL
2000
1100
page 4 of 12

FRAMED FIXED PANEL
2000
1200
page 5 of 12

FRAMED FIXED PANEL
page 6 of 12

FRAMED FIXED PANEL
COMPONENTS
Plumbers, please ensure a copy of the installation instructions
is left with the end user for future reference
page 7 of 12

FRAMED FIXED PANEL
page 8 of 12

FRAMED FIXED PANEL
INSTALLATION INSTRUCTIONS
page 9 of 12

FRAMED FIXED PANEL
Don’t risk it, use a licensed plumber.™
page 10 of 12

FRAMED FIXED PANEL
page 11 of 12

FRAMED FIXED PANEL
DETAILED CLEANING INSTRUCTIONS
Easy Clean Treated Glass
After showering we strongly recommend you squeegee the glass to remove water from the
surface.
A weekly clean using water and 30% vinegar or a mild detergent is all it takes to
remove dirt, soap scum and other contaminants.
Spray the vinegar and water on the glass and wipe with a soft cloth, leave this on the sur-
face for several minutes before rinsing and drying the glass.
Aluminium Frame and Metal Components
The simplest and most preferred method of cleaning your unit is by washing with clean
water and drying with a soft cloth.
Do not use Abrasive powders, steel and Teflon pads or dirty and gritty rags. The anodised
coating on the Aluminium is one of the hardest substances known, however, it will be dam-
aged by strong acidic or alkaline solutions. These solutions may dull and discolour the
finish.
The most reliable preventative measure to preserve your screen is to wipe the surface dry
with a soft cloth after each use.
Plumbers, please ensure a copy of the installation instructions
is left with the end user for future reference
page 12 of 12