RH Baby&child Chesterfield Bunk Bed User manual

WARNING: Read all instructions before assembling
this product. KEEPINSTRUCTIONSFORFUTUREUSE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You
can also order parts writing to the address above. Include the product model number,
color, and a brief description of the part. Call 1-800-762-1751
CARE AND CLEANINGCAGCARE AND CLEANING
DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft dry cloth add
period & Dab spills quickly with a soft cloth. Vacuum to remove dust.
If the Bunk Bed is to be stored, store in a cool dry place andcarefully package all original
hardware to protect from loss.
Page 1 of 11
!
Made In China
Chesterfield Bunk Bed –Assembly Instruction

IMPORTANT SAFETY INFORMATION FOR BUNK BED
1. Follow the information on the WARNINGS appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed
2. Always use the specified size mattress, to help prevent the likelihood of entrapment or falls
3. Surface of mattress must be at least 5 inches below the upper edge of guardrails on top bunk
4. Do not allow children under 6 years of age to use upper bunk.
5. Prohibit more than one person on upper bunk
6. Periodically check and ensure that the guardrails, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact Restoration Hardware for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. Use guardrails on both sides of the upper bunk.
12. I f t h e b u n k b e d w i l l b e p l ac e d n e x t t o a w a l l , t h e g u a r drail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and the wall.
13. The use of water flotation mattress is prohibited.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that
not designed for use with the bed: for example, but not limited to,hooks, belts, and jump ropes
15. Keep these instructions for future reference.
Page 2 of 11
Chesterfield Bunk Bed –Assembly Instruction

PARTSINCLUDE
(1)LeftBunkEnd-1pc (2)RightBunkEnd-1pc (3)BackSideRail-2pc
(4)FrontSideRail-2pcs (5)BackGuardRail-1pc (6)FrontGuardRail-1pc
(7)BedFoot-4pcs (8)Ladder-1pc (9)TwinPanel-4pcs
( 1 0 ) T w i n S l a t R o l l - 2 s e t s
Page 3 of 11
Chesterfield Bunk Bed –Assembly Instruction

HARDWARELIST
NO. HARDWARE & PARTS ENCLOSED Qty
A Threaded Rod 17 pcs
B Curved Washer 17 pcs
C Spring Washer 17 pcs
D Nut 17 pcs
E Spanner Wrench 1 pcs
F Big Screw (4cm) 17 pcs
G Medium Screw (2.5cm) 65 pcs
H Metal plate 6 pcs
I Allen Key 1 pcs
J Allen Head Bolt 7 pcs
K Big Flat Washer 7 pcs
The hardware is packed in box 2 with Bed Feet.
TOOLS NEEDED:
Screwdriver Phillips (Not included)
ASSEMBLY INSTRUCTION
Note:
-Bed must be assembled by at least two people.
-Please read instructions carefully before assembling bed.
-Use the above parts and fittings list to identify each component.
-Keep all packing materials until assembly is complete to avoid loss of smaller parts.
-Do not completely tighten all bolts until all steps are finished.
Page 4 of 11
Chesterfield Bunk Bed –Assembly Instruction

Process:
Step 1: Attach Bed Feet (7) to left Bunk End (1) and Repeat the procedure with Right Bunk End (2).
Page 5 of 11
( ) ( )
( )
1
2
7
Chesterfield Bunk Bed –Assembly Instruction

Step2:Attach Front Side Rail (4) to Left Bunk End (1) and Right Bunk End (2). Insert the Threaded Rods (A)
into the holes on the end of Front Side Rail (4), and insert Curved Washers (B), Spring Washers (C),
and Nuts (D) onto the Threaded Rods (A) to attach theLeft Bunk end (1) and Right Bunk End (2).
Tighten the Nut (D) and Threaded Rod (A) with Spanner Wrench (E). Repeat the procedure with Back
Side Rails (3).
Page 6 of 11
( )
( )
( )
( ) ( )
( )
1
2
3
3
4
4
A
B
C
D
E
Chesterfield Bunk Bed –Assembly Instruction

Step3: Attach Back Guard Rail (5) to Left Bunk End (1) and Right Bunk
End (2), by using the Allen Key (I) to tighten Allen Head Bolts (J)
andBigFlatWashers(K);
Step4:Attach Front Guard Rail (6) with Allen Head Bolts (J) and Big Flat Washers (K).
ForBunkswithLadderonLeftside,attach Front Guard Rail (6) to the Right Bunk
End(2),soladdersitsonLeft.
ForBunkswithLadderonRightside,attach Front Guard Rail (6) to Left Bunk
End(2),soladdersitsonRight.
Step 5:Reinforce the Back Guard Rail (5) and Front Guard Rail (6) with
MetalPlates(H),bytightening with Medium Screws (G);
BackGuardRail(5)
FrontGuardRail(6)
Page 7 of 11
( )
( ) ( )
( )
( )
( )
I
J
K
11
2
3
G
2
3
Chesterfield Bunk Bed –Assembly Instruction

Step6: L a y t h e T w i n S l a t R o l l ( 1 0 ) i n b e t w e e n t h e F r o n t S i d e R a i l
(4) and Back Side Rail (3), then tighten with Big Screws (F).
-The webbing on the slats should be on the bottom side.
-Numbers on the slat roll show the locations to tighten the Big Screws
Page 8 of 11
( )
( )
1
2
3
4
5
7
6
8
10
10
F
F
Chesterfield Bunk Bed –Assembly Instruction

Step 7: Lay the Twin Panels (9) on top of the Slat Roll (10), and tighten with
Medium Screws (G).
- Numbers on the panel show the locations to tighten the Medium Screws.
Page 9 of 11
( ) ( )
1
2
3
4
9 9
G
Chesterfield Bunk Bed –Assembly Instruction

Step 8:Attach Ladder (8) to Front Side Rail (4).
Page 10 of 11
( ) ( )
8 8
Chesterfield Bunk Bed –Assembly Instruction

Step9:Install Bedding:
BEDDING SPECIFICATION:
The following size mattress and Foundation are specified for use with this Bunk bed;
FULL BUNK MATTRESS DIAGRAM
5”MINIMUM DISTANCE
FROM TOP OF MATTRESS
TO TOP OF GUARD RAJL
9”MAXIMUM
THICKNESS MATTRESS
PLATFORM PANEL
Thank you for your purchase
www.rhbabyandchild.com
Page 11 of 11
MATTRESS:
53”W×75”L ×7”H
PLATFORM PANEL:CONSISTING OF 4 PANELS: 73.8”W
Note: MATTRESS AND PLATFORM PANEL MUST NOT EXCEED 9” TOTAL THICKNESS FOR UPPER BUNK.
Be sure to adhere to these BEDDING SPECIFICATIONS in order to avoid the possibility of failing or entrapment.
THES SPECIFICATIONS MUST BE STRICTLY ADHERED TO!
on upper bunk, ×75”L ×10”H
on lower bunk (full size)
53”W
38”W×75”L ×7”H on upper bunk, ×75”L ×10”H
on lower bunk (twin size)
38”W
×18.6”L×0.7”H (twin size)
×26.1”L×0.7”H (full size)73.8”W
Chesterfield Bunk Bed –Assembly Instruction