RH Baby&child MODERN METAL DISPLAY SHELF User manual

MODERN METAL DISPLAY SHELF - ASSEMBLY INSTRUCTIONS
PARTS INCLUDED:
A. M5 Wall Anchors (2 pcs.)
B. Metal Sheets (4 pcs.)
C. M5 Wall Screws (2 pcs.)
D. Whole Metal Frame (1 pc.)
E. 2.5 " L Wall Screw for St d (1 pc.)
TOOLS NEEDED: (NOT INCLUDED)
Pencil
Electric drill
IMPORTANT SAFETY INSTRUCTIONS:
1. Professional installation is strongly recommended.
2. For yo r safety, it is recommended that two people hang the fixt re.
3. These instr ctions are provided for yo r safety. It is important that they are read caref lly and completely
before installing the fixt re.
4. It is imperative that the shelf is mo nted into a wall st d.
5. Maxim m loading weight of this shelf is 50 lbs, b t make s re the loading of each layer is placed eq ally.
ASSEMBLY INSTRUCTIONS:
There are two assemb y options.
Assemb y option 1: use 2 wa anchors and 2 wa screws
1. Caref lly remove all parts from the box and remove all plastic coverings.
2. Lay all parts on a soft s rface to avoid damaging the finish.
3. To affix the shelf to drywall, determine final placement on the wall and mark the 2 screw holes of the
whole metal frame (D) on the wall with the pencil. Be s re to confirm precise distance and levelness
between holes for acc rate hanging.
4. Drill 2 holes into the wall, then insert the wall anchors (A). Align holes in the wall with the holes on the
back of whole metal frame (D), then screw wall screws (C) into the anchors.
5. Place a metal sheet (B) onto each layer of whole metal frame (D) and make s re they are affixed properly.
6. Installation is complete.
NO. ITEM DESCRIPTION QTY.
1 M5 Wall Anchors 2 pcs.
2 M5 Wall Screws 2 pcs.
3
2.5 " L M6 Wall
Screw or Stud 1 pcs.
4 Metal Sheet 4 pcs.

MODERN METAL DISPLAY SHELF - ASSEMBLY INSTRUCTIONS
Assemb ly option 2: se 1 wall anchor and 1 2.5"L st d screw
1. Caref lly remove all parts from the box and remove all plastic coverings.
2. Lay all parts on a soft s rface to avoid damaging the finish.
3. To affix the shelf to drywall, find proper st d position and determine final placement on the wall and mark
the 2 screw holes of the whole metal frame (D) on the wall with the pencil. Be s re to confirm precise
distance and levelness between holes for acc rate hanging.
4. Drill 2 holes into the wall, then insert the wall anchor (A) for 1 hole. Align holes in the wall with the holes on
the back of whole metal frame (D), then screw wall screw (C) into the anchor. Then se electric drill to
screw 1 2.5"L wall screw (E) into the wall st d.
5. Place a metal sheet (B) onto each layer of whole metal frame (D) and make s re they are affixed properly.
6. Installation is complete.
CARE INSTRUCTIONS:
1. To clean, se a soft, dry or damp cloth.
2. Do not se abrasive cleaners, chemical cleaners or metal polishes. The metal body has a protective lacq er
finish that co ld be damaged by chemicals or abrasive cleaning agents.